• Transactions on Electrical and Electronic Materials
• /
• v.3 no.3
• /
• pp.8-13
• /
• 2002

Controlled precipitation of quasi-binary semiconductor system is newly proposed as an effective and reliable technique for the formation of well-defined and crystallographically aligned semiconductor nanostructures. Using HgTe-PbTe quasi-binary semiconductor system, self-aligned HgTe nanocrystallites distributed three dimensionally within PbTe matrix were successfully formed by the simple three step heat treatment process routinely found in age hardening process of metallic alloys. Examination of the resulting nano precipitates using conventional transmission electron microscopy (CTEM) and high resolution TEM (HRTEM) reveals that the coherent HgTe precipitates form as thin discs along the (100) habit planes making a crystallographic relation of {100}$\_$HgTe///{100}$\_$PbTe/ and [100]$\_$HgTe///[100]$\_$PbTe/. It is also found that the precipitate undergoes a gradual thickening and a faceting under isothermal aging up to 500 hours without any noticeable coarsening. These results, combined with the extreme dimension of the precipitates (4-5 nm in length and sub-nanometer in thickness) and the simplicity of the formation process, leads to the conclusion that controlled precipitation is an effective method for preparing desirable quantum-dot nanostructures.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.235-238
• /
• 1996

An inverted double channel AIGaAs/lnGaAs/GaAs heterostructure grown by LP-MOCVD is demonstrated and discussed. Sheet carrier densities in excess of $4.5{\times}10^{12}cm^{-2}$ at 300K are obtained with a hall mobility of $5010cm^2/V{\cdot}s$. The proposed device with a $1.8{\times}200{\mu}m^2$ gate dimension reveals an extrinsic transconductance as high as 320 mS/mm and a saturation current density as high as 820 mA/mm at 300K. This is the highest current density ever reported for GaAs MODFET's with the same gate length. Significantly improvements on gate voltage swing (up to 3.5 V) and on reverse breakdown voltage (-10V) are demonstrated due to inverted structure.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.71-77
• /
• 2005

This study aims to find the safe vent area to prevent a destruction of building by gas explosion in a building. Explosion vessel which used in this experiment is 1/5 scale down model of simple livingroom and its dimension is 100cm in length 60cm in width and 45cm in height. Liquified petroleum gas(LPG) was injected to the vessel to the concentration of 4.5vol%, and injection rate were varied in 1L/min or 4L/min. Gas mixture was ignited by the 10kV electric spark. For analysis the characteristics of vented explosion pressure according to the vent size and vent shape, its size and shape were varied. From the experiment, it was found that explosion pressure in the vented explosion :in affected by the gas injection rate, vent area and vent shape. And the vent area to volume ratio(S/V) to prevent the building destruction by explosion pressure, it is recommended that the design of vent area happened by the explosion should be above 1/500cm in S/V. And if the vent area has complicate structure in same area, vented explosion pressure will be higher than a single vent, and possibility of building destruction will increase. Therefore to effectively vent the explosion pressure for protect a building and residents from the gas explosion hazards, the same vent area should have a singular and constant shape in the cross-sectional area of the vessel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8A
• /
• pp.829-835
• /
• 2002

When finite length image signal is decomposed into M-band synthesized using M-band orthogonal wavelet transform, the boundary signal of image are not reconstructed perfectly. for boundary signals to be reconstructed perfectly, different type filter bank or technique is applied to them when the dimension of analysed is proposed. It can be designed using the singular value decomposition of boundary perfect reconstruction matrix which is obtained from paraunitary matrix which is obtained from paraunitary matrix. And it is also discussed to design the boundary filter bank for improving the coding performance when it is applied to subband coder. The proposed boundary filter bank shows 7% gains in PSNR compared with reflected method.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.432-439
• /
• 2013

The aim of this study was to investigate the processes for evaluating the allowable bending stress. The confidence levels and the size-adjustment in standards were reviewed with experimental data. The results show that, (1) KS F 2152 was more strict than others overseas standards due to the higher confidence level. The 5% NTL of bending strengths by a method in KS F 2152 were lower than the overseas standards and more specimens were required for evaluating the structural properties according to KS F 2152. (2) Due to the absence of size-adjustment method in domestic standards, the specified size and the exponential parameters on the size-adjustment equation were reviewed by size factors. The specified size (width: 286 mm, length: 6096 mm), and the exponential parameters (w: 0.29, l: 0.14) will be suitable for developing the allowable bending stress in domestic standard. (3) The size adjusted allowable bending stresses of No. 2 grade Korean pine were lower than the allowable stresses tabulated in KBC even though less strict method (75% confidence level) to calculate 5% value was used. The allowable stresses tabulated in KBC are needed to be reviewed by continuous experimental data.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.378-383
• /
• 2014

This study predicts the of the hysteretic friction of a rubber block sliding on an SMA asphalt road. The friction of filled rubber on a rough surface is primarily determined by two elements:the viscoelasticity of the rubber and the multi-scale perspective asperities of the road. The surface asperities of the substrate exert osillating forces on the rubber surface leading to energy dissipation via the internal friction of the rubber when rubber slides on a hard and rough substrate. This study defines the power spectra at different length scales by using a high-resolution surface profilometer, and uses rubber and road surface samples to conduct friction tests. I consider in detail the case when the substrate surface has a self affine fractal structure. The theory developed by Persson is applied to describe these tests through comparison with the hysteretic friction coefficient relevant to the energy dissipation of the viscoelastic rubber attributable to cyclic deformation. The results showed differences in the absolute values of predicted and measured friction, but with high correlation between these values. Hence, the friction prediction model is an appropriate tool for separating the effects of each factor. Therefore, this model will contribute to clearer understanding of the fundamental principles of rubber friction.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.97-99
• /
• 2002

Turbulent premixed flames were a subject of many researches for a number of decades. Especially, Borghi suggested a manificent diagram classifying turbulent combustion reasions and Lipatnikov and Chomiak modified this diagram. But this diagram has difficulties tn defining a flame thickness and velocity and measuring integral length scales In addition, recently experimental techniques are being developed, so we can accurately use PIV diagnostics measuring 2D velocity field instead of LDV and make good use of PLIF techniques for obtaining the flame information. In this study, according to developing techniques, suggest a new diagram replacing the existing Borghi diagram. Simultaneous PIV/OH PLIF measurements are used, which measure a shear strain rate and a location of flames, respectively. The shear strain rate represents turbulence and the OH signal indicates the flame information, but there is no geometric Information which is very important to flame quenching. Hence, to consider the geometric information, calculate fractal dimensions of the OH images. So the diagram suggested in this research has three axes which consist of strain rate, OH signal, and fractal dimension and can classify turbulent premixed flames.

• Journal of Fashion Business
• /
• v.9 no.6
• /
• pp.56-70
• /
• 2005

This study investigates historically difference by age of wig banishments that symbolize social-economic status from West Egypt era baroque age as qualitative study that use secondary bibliographic data, there is purpose. Conclusion of this study is as following. Because wig putting on that symbolize among several usages of wig putting on, socio-economic status until 17th century baroque age from ancient Egypt is been in fashion through privilege class lower classes as well as upper class wig putting on attain. Ancient wig putting on became measure that divide class because differ material of wig or one dimension, shape (style) and length became linear measure that it can aim wealth's emblem that putting on of long wave wig and whole wig that differ lust has many wig though was in fashion though whole wig and were in fashion arriving to Renaissance. That it becomes France clean fingernails' necessaries as Louis the 14th that ready crux of absolute authority establishment of France Court put wig from depilation to count 17 was clear socio-economic status etc. symbol measure inclination. Go without question status or position, wealth and churchman puts wig so that can know special sex of weapon of where the soldiers are belonged as well as put wig and wig putting on was parted according to job and lower classes participated in fashion of wig putting on. Wig putting on that become measure that symbolize job or status in this baroque age, position, wealth etc. gave absolute influence in wig fashion in 18th century.

• Geomechanics and Engineering
• /
• v.21 no.3
• /
• pp.289-300
• /
• 2020

Estimating the damage induced by an explosion around a blast hole has always been a challenging issue in geotechnical engineering. It is difficult to determine an exact dimension for damage zone since many parameters are involved in the formation of failures, and there are some uncertainties lying in these parameters. Thus, the present study adopted a probabilistic approach towards this problem. First, a reliability model of the problem was established and the failure probability of induced damage was calculated. Then, the corresponding exceedance risk curve was developed indicating the relation between the failure probability and the cracked zone radius. The obtained risk curve indicated that the failure probability drops dramatically by increasing the cracked zone radius so that the probability of exceedance for any crack length greater than 4.5 m is less than 5%. Moreover, the effect of each parameter involved in the probability of failure, including blast hole radius, explosive density, detonation velocity, and tensile strength of the rock, was evaluated by using a sensitivity analysis. Finally, the impact of the decoupling ratio on the reduction of failures was investigated and the location of its maximum influence was demonstrated around the blast point.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.5
• /
• pp.711-724
• /
• 2019

The automatic drafting of clothing patterns can be realized through an Apparel Cad System when the clothing pattern has a pattern expression in human dimensions. However, it is difficult to apply automatic systems because it is difficult to express the ready-to-wear of various complex designs with one system. This study develops ready-to-wear patterns in an automatic drafting style and also develops nude patterns with human dimension-based drafting styles that can be applied to enable the setting of margins by design. For this purpose, radial body length measurement items and measurement methods were newly defined for female standard dummy and nude pattern systems. The institutional program was developed through the principle of a nude pattern system which is different from the pattern system of the existing system. The nude pattern developed in this study represents a basis and framework for the gradual transformation of the production pattern into the automatic system of the future and as a pattern having an institutional formula based on human dimensions.