• Radiation Oncology Journal
• /
• v.13 no.4
• /
• pp.391-396
• /
• 1995

Purpose : The Conformal Radiation Therapy has bee widely used under favour of development of computer technologies. The delivery of a large number of static radiation fields are being necessary for the conformal irradiation. In this paper we investigate dosimetric characteristics on penumbra regions of a multileaf collimator(MLC), and compare to those of lead alloy block for the optimal use of the system in 3-D conformal radiotherapy. Materials and Methods : The measurement of penumbra by MLC or lead alloy block was performed with 6 or 10 MV X-rays. The film was positioned at a dmax depth and 10 cm depth, and its optical density was determined using a scanning videodensitometer. The effective penumbra, the distance from $80{\%}$ to $20{\%}$ isodose lines and $90{\%}$ to $10{\%}$ were analyzed as a function of the angle between the direction of leaf motion and the edge defined by leaves. Results : Increasing MLC angle ($0-75^{\circ}$) was observed with increasing the penumbra widths and the scalloping effect. There was no definite differences of penumbra width from $80{\%}$ to $20{\%}$ isodose lines, while being the small increase of penumbra width from $90{\%}$ to $10{\%}$ isodose line varing the depth and energy. The effective penumbra width of lead alloy block are agree resonably with those of MLC within 4.8mm. Conclusion : The comparative qualitative study of the penumbra between MLC and lead alloy block demonstrate the clinical acceptability and suitability of the multileaf collimator for 3-D conformal radiotherapy.

• Journal of Korean Society of Forest Science
• /
• v.22 no.1
• /
• pp.49-62
• /
• 1974

1. In the comparison of survival ratio among three different methods(bark graft, veneer graft, root graft), bark graft showed the highest survival ratio and root graft was the lowest. It was shown to be significant at the level of 5% in the analysis of variance for the results. It was able to be supposed that one of the main causes for the results was the different amounts of ferric tannic acid which was formated owing to the reaction of grafting knife with tannic acid oozing from cutting faces of the tree. In juvenile tissue graft, the survival ratio of inverted radicle graft was a little higher than that of juvenile stem graft, but there was no significant difference between two methods in analysis of variance. 2. The most hairs of chestnut tree leaves were recognized as stellates on the most part of leaves except for venation. The number of rays in the stellates was ranged from 4 to 8 generally. It was shown to be highly significant differences at the level of 1% among the each race growing at the similar environmental condition in the length of ray and the distributed ratio of the stellates having different ray number. 3. Excepting for the basal width of serration there were no significant differences between $Imakita_1$, $Imakita_2$ as well as between $Teteuchi_1$, $Teteuchi_2$ at the each point of experimental items in this study. Such results made this study more useful. 4. Among the races that were growing in the similar environmental condition, there were highly significant differences at the level of 1% in the length and the width of serration. 5. The rolling of hair, the angle of serration from the leaf margin, the existence of lateral vein in the serration, the intrusion of main vein into the serration and the width of main vein were observed to be somewhat useful as the subsidiary methods for the identification of chestnut races.

• Korean Journal of Plant Resources
• /
• v.9 no.2
• /
• pp.157-163
• /
• 1996

This study was carried out to control the decrease of yield and the deterioration of quality of Angelica gigas roots by bolting. This phenomenon resulted from lignificartion and dwarfishness of roots because of bolting formed for inflorescence and fruition. Seedlings were grown for 60,90 and 120 days in nursery of the green house, and transplanted in main field to compare with traditional seedling that grew for 1 year. Growth of the petiole length compare with length and leaf width of aerial parts in nursery showed a remarkably progress, and root characters as root length, root diameter and root weight grew more vigorously in the order of nursery periods. Bolting was not entirely formed in plots transplanted the seedlings which grown for short-time; 60, 90 and 120days, but showed the high bolting rate, 64.3%,in traditional seedling plots. Yield was higher in plots that transplanted short-time growing seedlings than that transplanted traditional seedlings, and among 3 kinds of nursery periods yields were high in the order of nursery periods. For the increase of yield and decrease of bolting rate, it was needed to transplant small seedlings of 3-4g/plant which grew in nursery for 90-120 days.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.298-302
• /
• 2013

The experiment was carried out to examine the effect of planting date on the growth and marketable yield on rain shielding vinyl house in Busan area. Okra cultivars were 'Jukokra', 'Greensod', 'Marumichang', 'Betafive' and 'Akamarumichang'. Planting date were June and July. Plant height, stem length and leaf width were significantly different between various cultivars. Plant height and stem length were best at 'Akamarumichang' among all cultivars tested and the 'Betafive' cultivars showed the lowest plant growth of June treatment. There was no significant difference in planting of July treatment. Marketable yield of okra fruit was affected by planting date. In case of June planting date, 'Betafive' cultivars produced the highest marketable yield (4,286 kg/10a) in green fruit. Marketable yield of green okra fruit was increased at 'Betafive' and 'Greensod' cultivars, whereas 'Marumichang' cultivars was lowerd. Therefore, the optimum planting date was considered June planting in rain shielding culture of okra in Busan area.

• Journal of Korean Society of Forest Science
• /
• v.75 no.1
• /
• pp.51-54
• /
• 1986

The good growth of Populus alba ${\times}$ P. glandulosa is shown at the foothill of the mountain where good soil moisture is available, but its growth is poor at the upper part of the mountain where soil moisture is limitted. Stomatal frequency, stomatal size and transpiration rates that affect soil moisture demand were determined in order to know how this character is inherited from its parents. Number of stomata per $mm^2$, length and width of stomata from the abaxial leaf and transpiration rate ($g/cm^2$) per day in P. alba ${\times}$ P. glandulosa showed intermediate values between those of their parents, while P. alba showed the highest values and P. davidiana the lowest values. The values of stomatal frequency of P. alba ${\times}$ P. glandulosa were close to the expected mean values of parents in the $x^2$ test, and in the regression analysis the transpiration rates for the hybrid and its midparent had strong relationship with 0.97 of regression coefficient. The fact that these intermediate characteristics were observed in the hybrid suggests incomplete dominance in the hybrid. It is concluded that soil moisture demand in P. alba ${\times}$ P. glandulosa and its parents is closed related to stomatal frequency, stomatal size and transpiration rate.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.26-67
• /
• 2020

Synthetic Aperture Radar(SAR) is able to photograph the earth's surface regardless of weather conditions, day and night. Because of its possibility to search for hydrological factors such as soil moisture and groundwater, and its importance is gradually increasing in the field of water resources. SAR began to be mounted on satellites in the 1970s, and about 15 or more satellites were launched as of 2020, which around 10 satellites will be launched within the next 5 years. Recently, various types of SAR technologies such as enhancement of observation width and resolution, multiple polarization and multiple frequencies, and diversification of observation angles were being developed and utilized. In this paper, a brief history of the SAR system, as well as studies for estimating soil moisture and hydrological components were investigated. Up to now hydrological components that can be estimated using SAR satellites include soil moisture, subsurface groundwater discharge, precipitation, snow cover area, leaf area index(LAI), and normalized difference vegetation index(NDVI) and among them, soil moisture is being studied in 17 countries in South Korea, North America, Europe, and India by using the physical model, the IEM(Integral Equation Model) and the artificial intelligence-based ANN(Artificial Neural Network). RADARSAT-1, ENVISAT, ASAR, and ERS-1/2 were the most widely used satellite, but the operation has ended, and utilization of RADARSAT-2, Sentinel-1, and SMAP, which are currently in operation, is gradually increasing. Since Korea is developing a medium-sized satellite for water resources and water disasters equipped with C-band SAR with the goal of launching in 2025, various hydrological components estimation researches using SAR are expected to be active.

• Korean Journal of Agricultural Science
• /
• v.30 no.1
• /
• pp.11-19
• /
• 2003

The life-cycle of the aphid-parasite, Aphidius gifuensis, took 11.9 days at $25^{\circ}C$ and 12.1 days at $30^{\circ}C$. The female appearance rate of A. gifuensis was the best at $20{\sim}25^{\circ}C$ compared to the other temperatures. Optimum rearing temperature of Aphidius gifuensis was $20{\sim}25^{\circ}C$ Optimum temperatures for A. gifuensis emergence were $20^{\circ}C$ and $25^{\circ}C$ with 99.1% and 98.2%, respectively. However the emergence rate of Aphidius gifuensis was 58.8% at $10^{\circ}C$. There was a positive correlation between A. gifuensis adult activity and temperature, but there was a negative correlation between developmental period of Myzus persicae nymph and temperature. Among the pests occurring in pepper greenhouse, dominant species was M. persicae and its density was 6~1,024 per plant. The damaged fruit rate by Helicoverpa assulta was 3.3~53.3%. The number of aphid and mummy in the A. gifuensis released plot were 173.5 and 10 in June, 1.8 and 17 in July, 2000, respectively. The numbers of Aphidius gifuensis were 7.5 and 0.4 in May, 27.1 and 2.1 in June, 2001, respectively. The suppressive effects on M. persicae in A. gifuensis released plot was better than the control plot, but there was no significant difference compared to the pesticide-sprayed plot. The first leaf length and the stem width in the A. gifuensis released plot, the control plot, and the pesticide-sprayed plot were not significantly different, but the A. gifuensis released plot showed the highest yield among the plots.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.156-156
• /
• 2017

Most crop damages have been occurred by vermin(e.g., wild birds and herbivores) during the period between seeding and the cotyledon level. In this study, to minimize the damage by vermin and acquire the benefits such as protection against weeds and maintenance of water content in soil, immediately vinyl mulching after seeding was devised. Vinyl mulching has been generally covered with black color vinyl, that crop seeding locations cannot be detected by visible light range. Before punching vinyl, non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. For this study, the spline method was relatively faster than the other polynomial interpolation methods, because it has a lower maximum order of formulation when using a system such as the tridiagonal linear equation system which provided the capability of real-time processing. The temperature distribution corresponding to the distance between the crops was 10 cm, and the more clearly the leaf pattern of the crop was visually confirmed. The frequency difference was decreased, as the number of overlapped pixels was increased. Also the wave pattern of points where the crops were recognized were reduced.

• Journal of Animal Environmental Science
• /
• v.10 no.2
• /
• pp.101-110
• /
• 2004

A solid of Thermophilic Aerobic Oxidation(TAO) System was mixed with sawdust or a rice husks. After fermentation was finished, molding machine and a dryer were used, and pellet fertilizer was produced. The fertilizing experiment was carried out as five pieces by Bed soil, TAO solid(TAO-S), TAO pellet fertilizer(TAO-PF), Chemical fertilizer(NPK) and Control(no fertilizer). Growth rate of the Chinese cabbage by each treatment was examined. Analysis of microbe and soil characteristic before and after crop experiment were carried out. When the moisture contents of TAO-PF were $18\%$ and $25\%$, the occurrence rate of microbes for the storage time was increased to $80\%$ and $100\%$ respectively. However, in the $12\%$ of water content treatment was not increased microbes. The concentration of soil bacteria in TAO-PF and TAO-S for 15 day after treatment was $1.5\times10^7\~8.0\times10^7$ CFU/ml, and the concentration of bacteria for 50 day was increased to $6.3\times10^7$ and $8.3\times10^7$ CFU/ml. However, Fungus decreased. The concentration of Actinomycetes was increased in TAO solid, Bed soil and TAO-PF treatment. The TAO-S and TAO-PF treatment were normal to compare to the NPK treatment. In this experiment the height and width of the Chinese cabbage were 22.3 cm, 16.8 cm in Bed soil and 28.8 cm, 21.3 cm in TAO solid. The leaf number of TAO-S, TAO-PF and NPK treatment were similar to 39.8, 38.3, 40.3 sheet. As the result, the TAO-PF knew that use was possible with fertilizer.

• Journal of Animal Environmental Science
• /
• v.10 no.3
• /
• pp.169-174
• /
• 2004

The present study investigated the possibility of applying the fermented swine liquid manure handled with TAO system to hydroponic cultivation. The fermented swine liquid manure (FLM) used for the study was in low concentration of phosphoric acid (P). Hence, when doing hydroponic cultivation, the concentration of P and K was supplemented. The concentrations of N, P, and K in compensated FLMs were as fellows; (a) N 58mg/1, P 0.5mg/1 and K 31 mg/1 for FLM-1, (b) N 58mg/1, P 31 mg/l and K 39mg/1 for FLM-2, and (c) N 58mg/1, P 31 mg/1 and K 61 mg/1 for FLM-3, respectively. For hydroponic cultivation, it was possible to use diluted solution by 100 times through experiment of germination index. According to the experiment using lettuce, the compensated FLMs with P and K were superior in leaf width, yield and dry weight to FLM without any treatment. Therefore, it is necessary to supplement some nutrition before applying. In conclusion, it is highly estimated that the fermented swine liquid manure can be ap-plied to hydroponic cultivation. It is also necessary to conduct further researches related to nutritional compensation depending on the vegetables.