• Korean Journal of Veterinary Research
• /
• v.37 no.3
• /
• pp.629-637
• /
• 1997

This study was performed to determine the optimal dose of laser energy for wound healing. The skin wound with 8mm diameter was induced over the lumbar vertebrae of the rats, and wound squares, scab hardness, hematologic findings and histopathlogic findings according to irradiation of laser energy were studied. 1. Wound square was significantly reduced at Day 1 (p<0.01), 2 (p<0.01), 3 (p<0.05), 7 (p<0.01) and 8 (p<0.05), respectively in experimental groups, especially group II, compared with control group. 2. Scab hardness was significantly increased at Day 1 (p<0.01), 2 (p<0.01), 3 (p<0.05), 5 (p<0.01) and 7 (p<0.01), respectively in experimental groups, especially group II, compared with control group. 3. In hematological findings, red blood cells and white blood cells in experimental group were increased according to the lapse of days, but they were not significant. 4. In histopathologic findings, experimental groups, especially group II, revealed early scab formation, early appearance of phagocytes and fibroblast, rapid growth of granulation tissue and collagen, and promotion of wound healing in the result.

• The korean journal of orthodontics
• /
• v.51 no.5
• /
• pp.313-320
• /
• 2021

Objective: The purpose of this study was to evaluate the effects of chewing gum and low-level laser therapy in alleviating orthodontic pain induced by the initial archwire. Methods: Patients with 3-6 mm maxillary crowding who planned to receive non-extraction orthodontic treatment were recruited for the study. Sixty-three participants (33 females and 30 males) were randomly allocated into three groups: laser, chewing gum, and control. In the laser group, a gallium aluminum arsenide (GaAlAs) diode laser with a wavelength of 820 nm was used to apply a single dose immediately after orthodontic treatment began. In the chewing gum group, sugar-free gum was chewed three times for 20 minutes-immediately after starting treatment, and at the twenty-fourth and forty-eighth hours of treatment. Pain perception was measured using a visual analog scale at the second, sixth, and twenty-fourth hours, and on the second, third, and seventh days. Results: There were no statistically significant differences between the groups at any measured time point (p > 0.05). The highest pain scores were detected at the twenty-fourth hour of treatment in all groups. Conclusions: Within the limitations of the study, we could not detect whether low-level laser therapy and chewing gum had any clinically significant effect on orthodontic pain. Different results may be obtained with a higher number of participants or using lasers with different wavelengths and specifications. Although the study had a sufficient number of participants according to statistical analysis, higher number of participants could have provided more definitive outcomes.

• Journal of radiological science and technology
• /
• v.44 no.4
• /
• pp.367-373
• /
• 2021

A quality assurance of computed tomography(CT) have done seven items that were water attenuation coefficient, noise, homogeneity, spatial resolution, contrast resolution, slice thickness, artifact using by standard phantom. But there is no quality assurance items and methods for CT simulator at domestic institutions yet. Therefore the study aimed to access the CT dose index(CTDI), table tilting, image distortion, laser accuracy, table movement accuracy and CT seven items for CT simulator quality assurance. The CTDI at the center of the head phantom was 0.81 for 80 kVp, 1.55 for 100 kVp, 2.50 for 120 mm, 0.22 for 80 kVp at the center of the body phantom, 0.469 for 100 kVp, and 0.81 for 120 kVp. The table tilting was within the tolerance range of ±1.0° or less. Image distortion had 1 mm distortion in the left and right images based on the center, and the laser accuracy was measured within ±2 mm tolerance. The purpose of this study is to improve the quality assurance items suitable for the current situation in Korea in order to protect the normal tissues during the radiation treatment process and manage the CT simulator that is implemented to find the location of the tumor more clearly. In order to improve the accuracy of the CT simulator when looking at the results, the error range of each item should be small. It is hoped that the quality assurance items of the CT simulator will be improved by suggesting the quality assurance direction of the CT simulator in this study, and the results of radiation therapy will also improve.

• Herbal Formula Science
• /
• v.7 no.1
• /
• pp.121-130
• /
• 1999

Oriental medicine prescription has been used for the treatment of various clinical symptoms associated with cerebral apoplexy. However, single herb drug does not used cerebral apoplexy and there mechanisms of action have not been defined, and it is not yet known what effects they have on the hemodynamics of cerebral circulation. The study was aimed to investigate the effect batryticatus bombycis(BB) on the vascular systems including changes in blood pressure (BP), and regional cerebral blood flow (rCBF) and of male Sprague-Dawely rats. The changes in rCBF were determinated by laser-Doppler flowmetry. 1. Blood pressure was not affected by BB in rats. 2. rCBF was increased by BB in a dose-dependent manner. 3. Pretreatment with methylene blue(1mg/kg), and propranolol(1mg/kg) did not inhibited BB induced increased in rCBF. 4. Pretreatment with propranolol(1mg/kg) was increased by BB in a dose-dependent manner in blood perssure. 5. Pretreatment with ODQ($10{\mu}g/kg$) and L-NNA(1mg/kg) were inhibited BB induced increased in rCBF. 6. Pretreatment with L-NNA(1mg/kg) was increased rCBF in a dose-dependent manner. These results suggest that BB causes a diverse response of blood pressure and regional cerebral blood flow(rCBF). The increased in rCBF is also mediated by nitric oxide synthease and guanylate cyclase.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2736-2747
• /
• 2022

The operations in the design lifecycle of a nuclear power plant targeted to be decommissioned lead to neutron activation. Operations in the decommissioning process include cutting, decontamination, disposal, and processing. Among these, cutting is done close to the target material, and thus workers are exposed to radiation. As there are only a few studies on pressurizers, there arises the need for further research to assess the radiation exposure dose. This study obtained the specifications of the AP1000 pressurizer of Westinghouse and the distribution of radionuclide inventory of a pressurizer in a pressurised water reactor for evaluation based on literature studies. A cutting scenario was created to develop an optimal method so that the cut pieces fill a radioactive solid waste drum with dimensions 0.571 m × 0.834 m. The estimated exposure dose, estimated using the tool VISIPLAN SW, in terms of the decontamination factor (DF) ranged from DF-0 to DF-100, indicating that DF-90 and DF-100 meet the ICRP recommendation on exposure dose 0.0057 mSv/h. At the end of the study, although flame cutting was considered the most efficient method in terms of cutting speed, laser cutting was the most reasonable one in terms of the financial aspects and secondary waste.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.527-529
• /
• 2002

Photodynamic therapy (PDT) is a medical treatment using laser and photosensitizing drug taken up to destroy cancer cells. Singlet oxygen ($^1$0$_2$) generation is strongly related to this treatment. We have built a direct detection system monitoring feeble luminescence, in the near IR region, from $^1$0$_2$, We have comparatively studied the photophysical and photochemical properties in solution of a newly developed drug ATX-S10 and Photofrin already investigated clinically. We demonstrdted that ATX-S10 was capable of efficiently yielding $^1$0$_2$, which may lead to highly efficient PDT treatment. Successive laser excitation photobleached ATX -S10 readily in a dose-dependent manner. This result shows that ATX -S10 is useful in setting up suitable medical treatment conditions to minimize side effects.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1191-1199
• /
• 2003

This paper describes to observe the combustion process of only one droplet cluster. In this study, liquid fuel was atomized by ultrasonic wave to form an acoustically levitated droplet cluster. In order to elucidate the detailed structure of burning process of the droplet cluster, laser tomography method was applied. Time-series planar images of fuel droplets were processed and diameter of the each droplet was calculated based on the Mie-scattering theory. Using these data, the modified droplet group combustion number was estimated in time-series. As the result, when the internal droplet group combustion occur, the modified group combustion number dose not decrease monotonically, but show a tow-staged decreasing process. In all case of combustion process, combustion reactions were measured two types that combustion speed was fast and slow. It was casued by difference of concentration degree and droplet size distribution.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.1
• /
• pp.59-64
• /
• 2010

We examined the accuracy and efficiency of phantom by applying the designed phantom in order to check daily quality assurance easily by objective criteria and to confirm daily quality assurance of linear accelerator, simulator, and CT-simulator. The results of 10 weeks of linear accelerator output dose using American Association of Physicists in Medicine(AAPM) daily quality assurance guide were measured within ${\pm}1%$ of error. Mechanical check of laser alignment, optical distance indicator(ODI), CT scanner laser and alignment of gantry lasers with the center of imaging plane were measured within ${\pm}1mm$. Daily average working time for daily quality assurance of radiation therapy equipments was 38 minutes. The designed phantom was easy to install and daily quality assurance was possible with only one installation. The aspects reproducibility and efficiency as well as accuracy of quality assurance were excellent.

• Biomedical Science Letters
• /
• v.15 no.3
• /
• pp.233-239
• /
• 2009

The aim of this study was to evaluate the photodynamic effect of various photosensitizing agents against methicillin-resistant Staphylococcus aureus (MRSA). MRSA was exposed to light from a 632 urn diode laser (15 J/$cm^2$) in the presence of various photosensitizer, such as photofrin, photogem, radachlorine and ALA. In vivo study was performed using ICR mice. Twenty eight mice had a standard wound ($100\;mm^2$) created on the dorsum, and MRSA was inoculated into the wound region. The four groups were classified as follows: (1) the untreated control group (bacteria alone), (2) the bacteria plus light group (15 J/$cm^2$), (3) the bacteria plus photofrin group (kept in the dark), and (4) the photodynamic therapy (PDT) group (bacteria, photofrin, and light). After photofrin (dose 1 mg/kg) injection, the experimental group was irradiated with 632 urn diode laser (15 J/$cm^2$) for 30 minutes after In vitro results of PDT showed the complete killing of MRSA at the photofrin, radachlorine, and photogem However, ALA-PDT was ineffective on MRSA viability. In vivo results showed that photofrin has therapeutic effect on the wound infection. These results demonstrate that selective lethal photosensitization of MRSA can be achieved using phofrin, photogem and radachlorin. Thus, PDT can inactivate MRSA survival.

• Medical Lasers
• /
• v.10 no.1
• /
• pp.37-44
• /
• 2021

Background and Objectives Hypothyroidism is the most common endocrine disease. On the other hand, there is no treatment that can improve the thyroid function. Low-level laser therapy (LLLT) can improve the cellular activity. The effect of hypothyroidism is not obvious. This study examined the effects of LLLT on the thyroid gland function of a propylthiouracil (PTU)-induced hypothyroidism mouse model. Materials and Methods Twenty-five male ICR mice were distributed into five groups of five animals each: Negative control (none PTU animal) and positive control (PTU animal) of unirradiated animals, and three experimental groups with LLLT (3J, 6J, and 12J). Each mouse was exposed to a distinct dose of a 632-nm laser once a week for three rounds. The positive control group and three LLLT groups were induced into a hypothyroidism state by PTU administration. The animals' thyroid-stimulating hormone and thyroxine levels were measured using an ELISA kit, and their thyroid tissue was harvested and analyzed after sacrifice at the end of the experiment. The hormone level and morphological changes in the tissue of the five groups were compared. Results The thyroid hormone levels in the control group and LLLT groups were similar. On the other hand, the thyroid tissue of the LLLT groups showed some morphological changes that were similar to those of iodine deficiency thyroid. Conclusion LLLT did not affect the thyroid gland function in PTU-induced hypothyroidism mice.