• Electronics and Telecommunications Trends
• /
• v.28 no.4
• /
• pp.23-34
• /
• 2013

X-선 혹은 감마선 등 종래의 방서선 치료는 양성자 혹은 이온에 의한 치료방법의 등장함에 따라 퇴조할 것으로 보인다. 그 이유는, 양성자 등 전하를 띄는 입자치료기술이 치료 후 후유증이나 암의 재발을 현저히 억제시킬 수 있기 때문이다. 전하를 띄는 입자는 암 조직 전후의 정상 조직에 최소한의 피폭을 주나, X-선이나 감마선과 같은 광자들은 암 조직 전후의 정상세포가 암세포로 변화될 수 있는 정도의 피폭량을 주는 것으로 알려져 있다. 현재 임상 중인 양성자(혹은 극히 일부의 탄소이온 치료기)치료기는 1990년 미국의 로마린다(Loma Linda) 대학에서 최초로 건립된 방식인 사이클로트론 혹은 싱클로트론 가속기와 빔라인 및 겐트리(gantry)로 구성된다. 그 장치의 거대함만큼이나 가격과 유지비 등에서 일반 소형병원에서 운영하기에는 쉽지 않아 보인다. 이에 본고에서는 소형병원에서도 운영할 수 있는 저비용의 레이저 양성자(이온) 가속방식의 등장 배경과 향후 전망을 논하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.2
• /
• pp.158-165
• /
• 2008

The carbon dioxide properties change sharply near the critical or pseudo-critical point in the heat transfer processes. The reduction in turbulent, convective heat transfer parameters observed in some supercritical data and in experiments with common gases can be due to property variation, acceleration, buoyancy or combinations of these phenomena, depending on the conditions of the applications. In this study, the measurement for the secondary flow driven by buoyancy was carried out on the supercritical carbon dioxide turbulent flows in the different boundary condition with the constant mass flow rate. The available measuring techniques were used to clarify the behaviour of any supercritical fluid. Laser Doppler Velocimeter (LDV) and a special device was used to measure the secondary velocity and turbulent characteristics of the supercritical flows.

• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.387-389
• /
• 2003

For the establishing gravity base station and the improving the precision of exiting gravity network, and getting the gravity acceleration value in Korea, the absolute gravity measurements have been conducted at Daejeon(KRISS) from October 8 to November 8, 1996 with the NIM-II Absolute gravimeter and Suwon(NGI) from December 10 to December 16, 1999 with the FG5 Absolute gravity meter. The each absolute gravity value measured at KRISS and at NGI is 979,829.609${\pm}$0.006 mGal from 353 dropes and 979,918.775${\pm}$0.0001 mGal from a total 14,346 dropes. I think that we need the many base Absolute gravity station for the activation of the Earth science.

• Corrosion Science and Technology
• /
• v.22 no.1
• /
• pp.55-63
• /
• 2023

The aim of this study was to propose a multiple linear regression (MLR) equation to predict ultimate tensile strength (UTS) of 316L stainless steel with unspecified pit corrosion. Tensile specimens with pit corrosion were prepared using a potentiostatic acceleration test method. Pit corrosion was characterized by measuring ten factors using a confocal laser microscope. Data were collected from 22 tensile tests. At 85% confidence level, total pit volume, maximum pit depth, mean ratio of surface area, and mean area were significant factors showing linear relationships with UTS. The MLR equation using these three significant factors at a 85% confidence level showed considerable prediction performance for UTS. Determination coefficient (R²) was 0.903 with training and test data sets. The yield strength ratio of 316L stainless steel was found to be around 0.85. All specimens with a pit corrosion presented a yield ratio of approximately 0.85 with R² of 0.998. Therefore, pit corrosion did not affect the yield ratio.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.87-94
• /
• 2019

Recently, the advance of accurate dynamic displacement measurement devices, such as GPS, computer vision, and optic laser sensor, has enhanced the structural monitoring technology. In this study, the dynamic displacement data was used to verify the applicability of the structural physical parameter estimation method through subspace system identification. The subspace system identification theory for estimating state-space model from measured data and physics-based interpretation for deriving the physical parameter of the estimated system are presented. Three-degree-freedom steel structures were fabricated for the experimental verification of the theory in this study. Laser displacement sensor and accelerometer were used to measure the displacement data of each floor and the acceleration data of the shaking table. Discrete state-space model generated from measured data was verified for precision. The discrete state-space model generated from the measured data extracted the floor stiffness of the building after accuracy verification. In addition, based on the story stiffness extracted from the state space model, five column stiffening and damage samples were set up to extract the change rate of story stiffness for each sample. As a result, in case of reinforcement and damage under the same condition, the stiffness change showed a high matching rate.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.807-814
• /
• 2015

A control rod drive mechanism(CRDM) is a reactor regulating system, which inserts, withdraws or maintains a control rod containing a neutron absorbing material within a reactor core to control the reactivity of the core. The top-mounted CRDM for Jordan Research and Training Reactor(JRTR) with 5 MW power has been designed and fabricated based on the HANARO's experience through KAERI and DAEWOO consortium project. This paper describes the performance qualification test results to demonstrate the operability of a prototype and four production CRDMs during the reactor lifetime. The driving performance, the drop performance and the endurance tests for CRDM are carried out at a test rig simulating the actual reactor conditions. A vibration of internal components due to the coolant flow is also measured using a laser vibrometer. As a result, the CRDMs are driven having a good driving performance without a malfunction between command and output signals for the stepping motor. Also, the pure drop time and the impact acceleration are within 0.72 s and 4.2 g to meet the design requirements, and the vibrational displacement of control rod is measured as maximum $5.2{\mu}m$.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.496-503
• /
• 2016

Leakages at plant structures of power and petrochemistry plants have led to casualties and economic losses. These leakages are caused by fatigue failure of pipelines and their wall thickness. Vibration measurement methods for plant pipelines mainly use acceleration and laser sensors. These sensors are difficult to install and operate and thus lead to an increase in operational cost especially for wide area surveillance. Recently, measurements of leak and vibration displacements using cameras have attracted the interest of many researchers. This method has advantages such as simple installation, long distance monitoring, and wide area surveillance. Therefore, in this paper, we have developed a system that can measure the leakage and vibrational displacement by using a camera. Furthermore, the developed system was verified with experimental data.

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.793-802
• /
• 2019

The centrifuge model test is usually used for two-dimensional deformation and instability study of the soil slopes. As a typical loose slope, the municipal solid waste (MSW) landfill is easy to slide with large deformation, under high water levels or large earthquakes. A series of centrifuge model tests of landfill slide induced by rising water level and earthquake were carried out. The particle image velocimetry (PIV), laser displacement transducer (LDT) and marker tracer (MT) methods were used to measure the deformation of the landfill under different centrifugal accelerations, water levels and earthquake magnitudes. The PIV method realized the observation of continuous deformation of the landfill model, and its results were consistent with those by LDT, which had higher precision than the MT method. The deformation of the landfill was mainly vertically downward and increased linearly with the rising centrifugal acceleration. When the water level rose, the horizontal deformation of the landfill developed gradually due to the seepage, and a global slide surface formed when the critical water level was reached. The seismic deformation of the landfill was mainly vertical at a low water level, but significant horizontal deformation occurred under a high water level. The results of the tests and analyses verified the applicability of PIV in the two-dimensional deformation measurement in the centrifuge model tests of the MSW landfill, and provide an important basis for revealing the instability mechanism of landfills under extreme hydraulic and seismic conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.101-103
• /
• 2022

CCTV is mainly used as a real-time detection system for critical facilities. In the case of CCTV, although the accuracy is high, the viewing angle is narrow, so it is used in combination with a sensor such as a radar. LiDAR is a technology that acquires distance information by detecting the time it takes to reflect off an object using a high-power pulsed laser. In the case of lidar, there is a problem in that the utilization is not high in terms of cost and technology due to the limitation of the number of simultaneous processing sensors in the server due to the data throughput. The detection method by the optical mesh sensor is also vulnerable to strong winds and extreme cold, and there is a problem of maintenance due to damage to animals. In this paper, by using the 1550nm wavelength band instead of the 905nm wavelength band used in the existing lidar sensor, the effect on the weather environment is strong and we propose to develop a system that can integrate and control multiple sensors.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.127-132
• /
• 2023

Authors report the performance indicator of Roll to Roll MC (hereinafter referred to as RTR) through experiment that it is possible to process 2.0G acceleration, which cannot be coped with in the existing FPCB RTR, by reducing the weight of the Dancer roll system and controlling the torque using the servo motor. Proposed dancer roll system provides uniform tension to FPCB by solving problems such as high rotation speed, heat generation, and low torque, which were impossible to achieve with the conventional magnet clutch type RTR. Through the development of a lightweight processing method for rolls using magnesium material and the development of a torque control algorithm for servo motor, torque stability also increased. Due to the enabling technology developed in this study, the reaction speed of the dancer roll was improved and the target speed was achieved as well.