• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1277-1279
• /
• 1993

As a highly information-oriented society developes, various kinds of amorphous semiconductor devices, such as solar cells, electrographic printers, image sensors, and flat-panel televisions, have been developed as man/machine interfaces. This paper proposed the laser CVD techniques to deposit hydrogenated amorphous silicon thin film on glass or dielectric substrate at low temperatures. Varying the deposition conditions, we examined optical and electrical charateristics of a-Si:H film deposited by Laser CVD.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1428-1430
• /
• 1996

Thin Silicon oxynitride(SiON) films have been chemically deposited using 193nm ArF Excimer Laser CVD, with $Si_{2}H_{8}$, $N_{2}O$, and $NH_3$ as the reactive gases and $N_2$ as the carrier gas. Experimental results show that deposition rate and refractive index have a strong dependence on substrate temperature, chamber pressure, gas ratio, laser power and laser beam height. Electrical characterization of oxynitride films demonstrates that for $NH_{3}/N_{2}O$ flow ratios ranging from 0.25 to 1, the leakage currents, the interface trap density and the capacitances (dielect ric constant) increase and the dielectric breakdown fields decrease

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1271-1273
• /
• 1993

$SiO_2$ and SiON films are formed by Laser CVD for inter-level dielectrics in submicron VLSI. This technique is noticeable that film formation can be done at low temperatures, below $300^{\circ}C$ with less damage. An ArF Excimer Laser with wave length of 193nm is used to excite and dissociate reactant gases. After film formation growth rate, refractive index, I-V curve, and step coverage characteristics of the films were evaluated.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.241-244
• /
• 1991

In this paper, we introduced Silicon Oxynitride films deposited by Laser CVD, and evaluated the electrical breakdown of these films by TZDB(Time Zero Dielectric Breakdown) and TDDB(Time Dependent Dielectric Breakdown) test. In addition, high frequency C-V test was done in order to calculate hysterisis and flatband voltage(before and after electric field stress). Failure times against eletric field are examined and electric field accelation factor $\beta$ are obtained, and long term reliability was also described by extrapolating into life time in the operating voltage(5V). In this experiments, the deposited films with increased temperature represented small flatband voltage, hysterisis and favorable breakdown characteristics, this is why the hydrogen in the film was decreased and the film was densified, long term reliability was good in the laser CVD SiON films.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1243-1245
• /
• 1994

SiN films were deposited in $Si_2H_6$(99.9%), $NH_3$(99.99%) gas mixture with carrier gas $N_2$ on Si substrate by ArF Excimer Laser CVD. SiN film deposition conditions that are substrate temperature and Laser average power were varied in order to investigate the dependence of SiN film on the condition. A post-deposition anneal was performed to examine variation of fixed charge density in the films. The deposition rate was increased as the substrate temperature and Laser power were increased during film deposition. The refractive index was increased with increasing substrate temperature, but it didn't have the dependence on Laser power. The fixed charge density was decreased when a post-deposition anneal was performed.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.79-82
• /
• 1989

We studied the epitaxial growth of GaAs/GaAs and GaAs/Si by Laser CVD with 193nm ArF pulsed excimer laser. The source gases of TMGa and AsC13 or TMGa-TMAs adducts are mixed with H2, and photolyzed above the substrate which is heated up to around 300$^{\circ}C$. Then the photolyzed atoms are deposited on the silicon or GaAs substrate. The deposited films are analyzed with ESKA depth profiling and X-ray differaction method, which shows that the films on Si and GaAs are stoichiometric and crystalized at such a low temperature. We show a clear evidence for the epitaxial growth of GaAs on Si or GaAs on GaAs at low temperature by excimer laser CVD.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.336-338
• /
• 1997

The anneal behavior of ArF excimer Laser CVD SiON films has been studied using FT-IR absorption spectroscopy. The anneal temperature range was $400{\sim}800^{\circ}C$ Abundant hydrogen effusion from thes layers was observed as anneal temperature increased. The coexistence of both Si-H am N-H bonds offers the possibility for cross linking am evidence for the occurrence of cross lingking was found in the IR spectrum. The electrical properties were also obtained that tire films have low leakage currents am good TZDB properties.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.5
• /
• pp.318-323
• /
• 2000

The planarization of rough polycrystalline diamond films synthesized by DC arc discharge plasma jet CVD (chemical vapor deposition) was attempted using KrF excimer laser pulses. The effects of laser incidence angle and reaction gases (ozone and oxygen) on etching rate of diamond were studied. The temperature change of diamond and graphite with different laser fluences was calculated by computer simulation to explain the etching behavior of diamond films. The threshold energy density from the experiment for etching of pure crystalline diamond was about $1.7J/cm^2$ and fairly matched the simulation value. Preferential etching of a particular crystallographic plane was observed through scanning electron microscopy. The etching rate of diamond with ozone was lower than that with oxygen. When the angle of incidence was $80^{\circ}$ to the diamond surface normal, the peak-to-valley surface roughness was Significantly reduced from $20{\mu}m$ to $0.5{\mu}m$.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1149-1151
• /
• 1995

In order to examine the deposition mechanism for $SiO_2$ by ArF(193nm) excimer Laser using $Si_2H_6$ and $N_2O$ gas mixture, deposition rate and refractive index were measured and creative modeling on film deposition was established by suggesting now precursor and film growing mechanism.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1003-1006
• /
• 2004

We have fabricated poly-Si TFTs at 170$^{\circ}C$ using inductively coupled plasma chemical vapor deposition (ICP-CVD) and excimer laser annealing (ELA). A Poly-Si film with large grains exceeding 5000${\AA}$ and a $SiO_2$ film with high breakdown field are deposited by ICP-CVD. A high mobility exceeding 100$cm^2$/Vs with a low sub-threshold swing of 0.76V/dec was obtained.