• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1114-1119
• /
• 2004

The photodepositioned tungsten film by laser CVD has been carried out the taping test with scotch tape over 10 times. As a result, it exhibited strong adhesion to the under-film such as ITO and SiNx patterned on the LCD substrate. However, it was seriously attacked by alkaline solution used for removing polyimide. And a thickness of laser CVD tungsten film had a close relation to a speed of laser scanning. Also we have improved the success rate of a laser CVD repair with making two pairs of contact hole structure and decreasing laser scanning speed.

• Transactions on Electrical and Electronic Materials
• /
• 제4권5호
• /
• pp.33-37
• /
• 2003

This study was performed to investigate the deposition mechanism of SiO$_2$ by ArF excimer laser(l93nm) CVD with Si$_2$H$\_$6/ and N$_2$O gas mixture and evaluate laser CVD quantitatively by modeling. With ArF excimer laser CVD, thin films can be deposited at low temperature(below 300$^{\circ}C$), with less damage and good uniformity owing to generation of conformal reaction species by singular wavelength of the laser beam. In this study, new model of SiO$_2$ deposition process by laser CVD was introduced and deposition rate was simulated by computer with the basis on this modeling. And simulation results were compared with experimental results measured at various conditions such as reaction gas ratio, chamber pressure, substrate temperature and laser beam intensity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1301-1303
• /
• 1997

This study was performed to investigate the deposition mechanism of $SiO_2$ by ArF excimer Laser(193nm) CVD with $Si_2H_6$ and $N_2O$ gas mixture and evaluate Laser CVD quantitatively by modeling. In this study, new model of $SiO_2$ deposition process by Laser CVD is introduced and deposition rates are simulated by computer with the basis on this modeling. And simulation results are compared with experimental results measured at various conditions such as reaction gas ratio, chamber pressure, substrate temperature and laser beam intensity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.231-233
• /
• 1993

This paper proposes a new $SiO_2$ film condenser fabrication technique by photo-chemically deposited $SiO_2$ films by Laser CVD. Laser CVD is noticeable that film deposition can be done at low temperature below $300^{\circ}C$ with less damage. After film deposition, the characteristics of Laser CVD $SiO_2$ films and $SiO_2$ film condenser is evaluated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1270-1273
• /
• 1997

We have investigated the latchup characteristics of BL/BILLI retrograde twin well CMOS that has the high energy ion implanted buried layer to intend for more improvement of latchup compare to conventional retrograde well and BILLI structures. We explored the dependence of various latchup characteristics such as n+ trigger latchup and p+ trigger latchup on the buried layer implant doses. We show various DC latchup characteristics that allow us to evaluate each technology and suggest guidelines for the reduction of latchup susceptibility.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1292-1297
• /
• 1997

본 연구에서는 latch-up 개선책의 일환으로 개발중인 매립층을 갖는 retrograde well의 형성기술과 더불어 공정 단순화를 목적으로 개발된 BILLI (Buried Implanted Layer for Lateral Isolation) well 구조[1]에 대한 공정 유기 결함을 분석하고 그에 의한 소자 열화 특성을 분석 하였으며 그 개선책을 제시 하고자 하였다. 매립층 형성에 의한 유기결함은 접합 누설전류와 Gate oxide 신뢰성을 열화 시켰으나 이온주입 후 $1000^{\circ}C$ 이상의 온도에서 10sec 정도의 RTP anneal에 의해 그 소자 특성이 개선되며 표면 결함이 감소함을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1439-1441
• /
• 1994

This paper propose a new $Ta_2O_5$ film fabrication technique by Laser CVD. Laser CVD is noticable that film formation can be done at low temperature with less damage. After film deposition, the characteristics of Laser CVD $Ta_2O_5$ film is evaluated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.155-157
• /
• 1991

This paper describe a Laser CVD technology which realizes planarized interlevel dielectrics in sub-micron VLSI's. This technology comprises sub-micron gap filling with $SiO_2$ films between metal lines. Laser CVD process conditions have been investigated to improve step coverage of interlevel dielectrics. An ArF(193nm) Excimer Laser was used to excite and dissociate gas phase $SiH_4\;and\;N_2O$ molecules. The Laser CVD by $N_2O\;and \;SiH_4$. mixture gases has realized conformal deposition above the temperature of $300^{\circ}C$, as a result sub-micron gaps were buried with $SiO_2$ films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1550-1552
• /
• 1996

Poly-Si films were deposited by Laser CVD using 193nm ArF Excimer Laser from disilane($Si_{2}H_{6}$) and then the films were etched by Laser Etching using the same Laser with SF6 etching gas. Dependence on various film deposition conditions and etching conditions was investigated respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.191-193
• /
• 1991

In this paper, we introduce silicon dioxide films deposited by Laser CVD, and evaluate the breakdown characteristics of these films by TZDB(Time Zero Dieiectric Breakdown) and TDDB(Time Dependent Dielectric Breakdown) test, failure times against eletric field are examined and accelation factors ${\beta}$ are obtained, and also, long term reliability is described by examining TDDB under positive voltage bias, all the above results are compared with PECVD(Plasma Enhanced CVD) $SiO_2$ breakdown, data, as a result, it is shown that the breakdown characteristics of Laser CVD $SiO_2$ films is improved.