• Korean Journal of Environmental Biology
• /
• v.23 no.4
• /
• pp.357-361
• /
• 2005

The exposed strain of C. riparius treated with di (ethyl- hexyl)-phthalate (DEHP) did not result in a consistent relationship between mortality or sex ratio and chemical concentrations. And after treating with DEHP, the emergent female from the exposed strain appeared to be fatty with a large body volume comparing with the non - exposed strain. The emergent period (EP) was especially different between the exposed fourth strain and the non-exposed strain; generally the exposed strain was $7\~10$ days, and non - exposed strain was $17\~24$ days. Regarding sustainable exposed effects, the EP, the first emergent day (FED), and the body volume (BV) could be suggested as suitable bio - markers for detecting of exposure to various EDCs.

• Microbiology and Biotechnology Letters
• /
• v.23 no.5
• /
• pp.580-587
• /
• 1995

In order to produce the bacteriolytic enzyme, bacterial strains capable of excreting a large amount of the enzyme were screened from the coastal sea water samples in Pusan. The bacterial strain SH-1, which showed the highest activity among 43 bacteriolytic enzyme producing bacteria, was finally selected for further studies. The strain SH-1 was an endospore-forming grampositive rod, and the position of spore was paracentral. These morphological characteristics assigned the isolated strain to the morphological group I classified by Gordon. The fatty acid composition of the bacterial stain was analyzed to be consisted of branched chains of iso-Cn and anteiso-Cn. Based on the percent content of the branched chain (93.85%), the isolates could be identified as a species of Bacillus. According to the experimental results of the API system (API 50CHB & API 20E) the strain was identified as Bacillus subtilis. Numerical texonomy, in which 82 major characters were examined using several species of Bacillus as the standard bacteria, indicated that the strain SH-1 showed 90% similarity to Bacillus subtilis. Thus, the isolated strain SH-1 could be identified as Bacillus subtilis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.3
• /
• pp.219-223
• /
• 2009

This paper prescribed the structural integrity of the API 5L X65 pipeline subjected to tensile pre-strain. The effects of pre-strain on the mechanical properties of API 5L X65 pipe were substantially investigated through a variety of the experimental procedures. Axial tensile pre-strain of 1.5, 5 and 10% was applied to plate-type tensile specimens cut from the pipe body prior to mechanical testing. Tensile test revealed that yield strength and tensile strength were increased with increasing tensile pre-strain. The increasing rate of the yield strength owing to the pre-strain is greater than that of the tensile strength. However, the pre-strain up to 5% had a little effect on the decreasing of the fracture toughness. The structural integrity of the API 5L X65 pipeline subjected to large plastic deformation was evaluated through the fitness-for service code.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.1
• /
• pp.122-126
• /
• 1997

Bifidobacteria have been known as beneficial inhabitant of human intestine. Therefore, bifidobacteria began to be noticed as a starter in the manufacture of fermented dairy products. Perhaps the key for effective use of bifidobacteria in commercial dairy products is the maintenance of viability of bifidobacteria during large scale preparation of starter culture and distribution of products. So we tried to obtain the bifidobacteria having suitable characteristics for using as a starter in the manufacture of fermented dairy products. Among bifidobacteria isolated from Korean, E-4 strain showed the highest resistance to oxygen. To know whether the selected strain will be fit for manufacture of fermented dairy products, we also investigated resistance of the selected strain to HCI. The selected strain, E-4, was more resistant to environmental stresses such as oxygen, H2O2 and HCI than Bifidobacterium longum known as resistant strain to environmental stresses. According to carbohydrate fermentation patterns and morphological characteristics, E-4 strain was identified as B. bifidum. In conclusion, the selected strain, E-4, was thought to be fit for manufacture of fermented dairy products.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.147-155
• /
• 1995

Recent experimental studies have been shown that strain gages can be employed to determine either static or dynamic stress intensity factors $K_{I}$ wiht relatively simple experiments. However, it does not usually provide a reliable value of stress intensity factor because of local yielding and limited regions for strain gage placement at the vicinity of the crack tip. This paper attempted to define a valid region and to indicate procedures for locating and orienting the strain gage to determine static toughness $K_{Is}$ accurately form one strain gage readings with respect to varying loadings. The strain gage methods was used for compact tension specimens made of Polycarbonate and PMMA(polymethyl methacrylate). Series expansions of the static and dynamic strain fields are applied. Strain gage orientation and location are then studied to optimize the strain response. Especially, in the dynamic experiment, the specimen employed is an oversized Charpy V-notch specimen which has been modified to provide significant constraint with a large elevation of the flow stress. The impact behavior of the specimen is monitored by placing strain gage near the crack tip. The dynamic toughness $K_{Id}$ is determined from the strain time traces of this gage.e.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.535-541
• /
• 1999

Low-dislocation-density large-diameter GaAs single crystals with low-residual-strain have been strongly required. We have developed dislocation-free 3-inch Si doped GaAs crystals for photonic devices, and low-dislocation-density low-residual-strain 4-inch to 6-inch semi-insulating GaAs crystals for electronic devices by Vertical Bridgman(VB) technique. We confirmed that VB substrates with low-residual-strain have higher resistance against slip-line generation during MBE process. VB-GaAs single crystals show uniform radial profile of resistivity reflecting to the flat solid-liquid interface during the crystal growth. Uniformity of micro-resistivity of VB-GaAs substrate is much better than of the LEC-GaAs substrate, which is due to the low-dislocation-density of VB-GaAs single crystals.

• Transactions of Materials Processing
• /
• v.8 no.1
• /
• pp.101-107
• /
• 1999

The upset forging stage is the initial work in the forging process. It is used to remove the segregation and cavities of the ingot. Specially in handling large sized ingot, an improper upset forging can cause serious surface tearing. However, there is no detail reference for stable upset forging work. To resolve this difficulty, we studied several factors such as upset forging time, temperature varation of ingot, damage, load and stain rate etc., by using the rigid-plastic finite element approach available in the DEFORM code. Numerical simulation results indicated that: the load value of upset forging works shows severe decreasing trend at a certain point, same as strain rate. Also defects were found to be concentrated around the upper and lower portions of the ingot. With these results, we can estimate a guideline for stable upset forging work.

• Structural Engineering and Mechanics
• /
• v.13 no.6
• /
• pp.591-614
• /
• 2002

This paper presents experimental and numerical analyses of the thermomechanical behaviour that takes place in SAE1020 mild steel cylindrical specimens during the conventional tensile test. A set of experiments has been carried out in order to obtain the stress-strain curve and the diameter evolution at the neck which allow, in turn, to derive the elastic and hardening parameters characterizing the material response. Temperature evolutions have also been measured for a high strain rate situation. Moreover, a finite element large strain thermoelastoplasticity-based formulation is proposed and used to simulate the deformation process during the whole test. Some important aspects of this formulation are discussed. Finally, the results provided by the simulation are experimentally validated.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.129-157
• /
• 1999

Low-dislocation-density large-diameter GaAs single crystals with low-residual-strain have been strongly required. We have developed dislocation-free 3-inch Si-doped GaAs crystals for photonic devices [1], and low-dislocation-density low-residual-strain 4-inch to 6-inch [2, 3] semi-insulating GaAs crystals for electronic devices by Vertical Boat (VB) technique. We confirmed that VB substrates with low-residual-strain have higher resistance against slip-line generation during MBE process. VB-GaAs single crystals show uniform radial profile of resistivity reflecting to the flat solid-liquid interface during the crystal growth. Uniformity of micro-resistivity of VB-GaAs substrate is much better than that of the LEC-GaAs substrate, which is due to the low-dislocation-density of VB-GaAs single crystals.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.952-956
• /
• 1989

We experimentally investigated the mechanical and electrical characteristics of the poly vinyl alcohol(PVA) hydrogel which have attracted special interest as a mechanochemical material, and the applicability of the hydrogel membrane to a sensor for measuring large strain. As a result, the PVA hydrogel could be regarded as a Hookean elastic material and was treated as an electric resistance which was proportional to the tensile strain within a linearly elastic range.