• 대한수학회보
• /
• 제44권4호
• /
• pp.743-751
• /
• 2007

The aim of this article is to derive twenty five transformation formulas in the form of a single result for the triple hypergeometric series $X_8$ introduced earlier by Exton. The results are derived with the help of generalized Watson#s theorem obtained earlier by Lavoie et al. An interesting special cases are also pointed out.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2002년도 한국해안해양공학발표논문집 Proceedings of Coastal and Ocean Engineering in Korea
• /
• pp.62-65
• /
• 2002

파랑은 주로 먼바다에서 바람에 의해 생성되어 육지로 전파해오면서 천수, 굴절, 회절, 반사, 부서 짐 등의 여러 가지 변형의 과정을 거친다. 이러한 파랑의 변형을 예측하는 한 방법은 비압축성 유체와 비회전류의 연속방정식인 Laplace 방정식을 지배 방정식으로 하고 해수면에서의 운동학적 경계조건과 동역학적 경계 조건, 그리고 바닥에서의 운동학적 경계조건을 적용하여 해를 구한다. (중략)

• 한국안전학회지
• /
• 제4권1호
• /
• pp.47-58
• /
• 1989

This paper treats the vibration analysis of a simply supported rectangular plate stiffened with viscoelastic beams. The effect of viscoelastic beams on the vibration of the plate is analyzed by using Dirac delta function and the equation of motion can be expressed only one equation. The frequency equation is obtained by applying Laplace transformation. The effect of volumes, numben and aspect ratios of beam on the frequency of the plate is analyzed.

• 한국조명전기설비학회지:조명전기설비
• /
• 제6권5호
• /
• pp.45-49
• /
• 1992

The transient characteristics of grounding systems are very important in the insulation design of electrical installations and depend on the shape and size of electrodes, soil resistivity and the magnitude and wave of the injection current. This paper establishes an algorithm to compute the surge impedance of two or more grounding systems using the Laplace Transformation technique and deals with the analysis of the transient characteristics on grounding systems.

• 제어로봇시스템학회논문지
• /
• 제9권10호
• /
• pp.822-831
• /
• 2003

A computer-vision based pipe-inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and the radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplace operator with input image, which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation is introduced for line detection. The dimension of inner and outer radius of pipe is calculated by the proposed line-scanning method. The method scans several lines along the X and Y axes, calculating the eccentricity of inner and outer circle, by which pipes with wrong end-shape can be classified and removed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.99-106
• /
• 2000

A method of two and three dimensional orthogonal grid generation with control of spacing by using the covariant Laplace equation is Presented. An important feature of the methodology is its ability to control effectively the grid spacing especially near the boundaries still maintaining good orthogonality in whole field. The method is based on the concept of decomposition of the global transformation into consecutive transformation of an approximate conformal mapping and au auxiliary orthogonal mapping to have linear and uncoupled equations. Control of cell spacing is based on the concept of reference arc length, and orthogonal correction is performed in the auxiliary domain. It is concluded that the methodology can successfully generate well controlled orthogonal grids around bodies of 2 and 3 dimensional configurations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.388-393
• /
• 1988

New circuit D-Q transformation concept is introduced to analyze AC converters such as inverters, rectifiers and cyclo-converters with ease. The equivalent linear time invariant circuit is obtained by substituting switches with equivalent turn-ratio variable transformers and changing balanced AC reactors into equivalent DC reactors combined by gyrators. This circuit enables us to utilize the powerful linear system analysis techniques such as Laplace transform otherwise which could not be applied to the time varying switching systems. Direct substitution of switches of DC converters with transformers is shown as a preliminary. Then the modeling procedure is shown for a controlled rectifier-inverter circuit. Finally an analysis example is proposed for a buck-boost inverter and the result is compared with the conventional approach. This approach is applicable to all AC converter families to determine the AC transfer functions and the DC operating points. It is identified that the switching systems are equivalent to the RLC filter circuits with transformers and gyrators.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.946-950
• /
• 2003

In this paper, a computer-vision based pipe shape inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplace operator with input image, which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation for line detection. The dimension of inner and outer radius of pipe is calculated by proposed line-scanning method. The method scans several lines along the X and Y axes, calculating the eccentricity of inner and outer circle. by which pipes with wrong end-shape can be classified removed.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1058-1063
• /
• 2010

The vibration analysis of a rotating cantilever beam with tip mass was studied by using DTM(differential transformation method). DTM is one of the numerical methods, for finding series solutions by transforming differential equations to algebraic ones similar with Laplace transform. The advantages of the DTM are that it is easy to understand and is effective in finding numerical solutions. Applying DTM, the natural frequencies of a rotating cantilever beam were obtained taking into consideration the effects of tip mass. Also, convergence study of DTM was performed to decide the number of terms used in eigenvalue problems. Numerical results obtained by DTM show good agreement with those by other methods. As a result, it is expected that DTM can be a useful method in vibration analysis such as that of a rotating cantilever beam with tip mass.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.521-525
• /
• 2002

In this paper, a computer-vision based pipe-inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplace operator with input image, which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation for line detection. The dimension of inner and outer radius of pipe is calculated by proposed line-scanning method. The method scans several lines along the X and Y axes, calculating the eccentricity of inner and outer circle, by which pipes with wrong end-shape can be classified removed.