• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.864-868
• /
• 2005

This paper develops an analysis model of a piezoelectric transducer. The transducer considered in this paper is a bolt-clamped Langevin-type transducer, which consists of a couple of piezoelectric discs, a couple of metal blocks for added mass effect, and a bolt to tighten them. A new analytical model for the transducer has been developed by taking into account the contact area between the piezoelectric ceramic and the metal block. The analysis model is verified by calculating the variations of the resonance frequency due to the contact area and comparing them with reported experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.959-960
• /
• 2013

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.484-487
• /
• 2005

This paper presents an analytical approach to describe the variation in the vibration characteristics such as the natural frequency of a piezoelectric transducer under static pre-pressure. The transducer considered in this paper is a bolt clamped Langevin type transducer, which consists of a couple of piezoelectric discs, a couple of metal blocks for added mass effect, and a bolt to tighten them. A new analysis model for the transducer has been developed by taking into account the contact area between the piezoelectric ceramic and the metal block. The variation of the resonance frequency due to the pre-pressure has been calculated compared with other results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1348-1350
• /
• 1994

In this study, various nozzle of ultrasonic spray were designed by using Langevin type electrostriction transducer. The electrical and dynamic characteristics of ultrasonic nozzle with various horn type were investigated. We obtained the average particle size and size distribution profiles with output frequency.

• 비파괴검사학회지
• /
• 제21권4호
• /
• pp.434-438
• /
• 2001

봉에서 전파하는 비틀림파를 발생시키는 압전 비틀림 파동 변환기를 제작하였다. 비틀림 파동을 발생시키는 원리는 원주방향으로 분극된 압전 원판에 인가된 두께 방향 전압에 의해 나타나는 원주방향 전단운동이다. 압전 비틀림 원판을 제작한 후, 공진 주파수를 낮추기 위하여 랑주방(Langevin)형 비틀림 변환기를 제작하였다. 제작된 변환기들의 공진 주파수를 측정한 결과, 해석에 의해 예상된 특성과 잘 일치하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.385-388
• /
• 2001

The cutting performance of a machine depends on the ability of the design of the acoustic horn to facilitate an increase in tool-tip vibration, allowing a significant amount of material to be removed. In this paper, three kinds of acoustic horns were designed and FEM was used to estimate displacement magnifications of horn tips. An optimization procedure for the profile has been followed to obtain maximum magnification, for higher rate of material removal and safe working stresses for the horn material.

• Smart Structures and Systems
• /
• 제1권1호
• /
• pp.47-61
• /
• 2005

A ring-shaped lead zirconate titanate (PZT) piezoceramic sensor has been integrated with the Langevin-type piezoceramic driver of an ultrasonic wire-bonding transducer to form a smart transducer for in-situ measurement of three essential bonding parameters: namely, impact force, ultrasonic amplitude and bond time. This sensor has an inner diameter, an outer diameter and a thickness of 12.7 mm, 5.1 mm and 0.6 mm, respectively. It has a specifically designed electrode pattern on the two major surfaces perpendicular to its thickness along which polarization is induced. The process-test results have indicated that the sensor not only is sensitive to excessive impact forces exerted on the devices to be bonded but also can track changes in the ultrasonic amplitude proficiently during bonding. Good correlation between the sensor outputs and the bond quality has been established. This smart transducer has good potential to be used in automatic process-control systems for ultrasonic wire bonding.

• 한국음향학회지
• /
• 제36권2호
• /
• pp.108-114
• /
• 2017

수중 초음파 탐지 시스템에서 배열 진동소자로 사용되는 정방형의 방사면을 갖는 초음파 트랜스듀서의 자기 방사임피던스를 실험적으로 해석하였다. 7개의 진동수가 서로 다른 란주반형 진동자를 제작하여 파수와 진동자의 한변의 길이의 곱인 ka의 값이 1~3의 범위에 대해서 방사리액턴스 및 방사저항을 측정하였다. 이 결과를 수열을 이용한 방사임피던스의 이론계산 결과와 비교하여 본 연구에서 수행한 실험방법의 유효성을 확인 하였고 정방형의 방사면에 대한 방사임피던스의 변화경향을 실험적으로 확인할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제43권5호
• /
• pp.319-330
• /
• 2022

In this study, the optimal driving frequency was derived through finite element analysis (FEA) to optimize the developed piezoelectric ultrasonic medical devices(PUMD) for bone surgery. The core of the PUMD is the piezoelectric ceramic (PZT), which is a vibrator that generates vibration energy. The piezoelectric ceramic shows the maximum current value with respect to the input voltage at the resonance frequency, which generates the maximum mechanical vibration. In the past, various studies have been conducted related to the analysis of PUMD, but most of the research so far has been limited to free vibration analysis. However, in order to derive the accurate resonant frequency, the initial stress generated by bolt tightening in the bolt-clamped Langevin type transducer (BLT) must be considered. In this study, after designing a PUMD, the driving performance according to the bolt tightening value was analyzed through FEA, and this was experimentally verified. First, the resonance mode and frequency response were confirmed through modal and harmonic analysis at 20-40 kHz, which is known as the optimal driving frequency band of PUMD for bone surgery. In addition, the design of the PUMD was confirmed by checking the mechanical behavior of the tip and the piezoelectric ceramic at the resonant frequency. Consequentially, the characteristic evaluation was performed, and it was confirmed that the resonant frequency result derived through the FEA was reasonable. Through this study, we presented a more rational FEA method than before for BLT transducers. We expect that this will shorten the time and cost of developing a PUMD, and will enable the development of more stable and high-quality products.

• 한국음향학회지
• /
• 제29권2호
• /
• pp.91-96
• /
• 2010

본 연구에서는 식물의 씨로부터 착유하는 기존의 착유방법에 있어서 착유 효율의 한계를 개선하기 위하여 초음파를 이용한 부가 에너지의 적용 가능성을 실험적으로 확인 하였다.그 결과, 기존의 압착방식에 의한 착유 방식에 란주반형 트랜스듀서로부터 방사되는 초음파 진동에 의한 압력을 부가함으로써 기존의 단순압착 방식의 착유효율이 15 %인 경우 25 %로 증가하여 적지 않은 효율의 증가를 보였다. 초음파에 의한 부가 압력을 해석하기 위하여 착유시료의 음향임피던스 및 초음파 트랜스듀서의 전통속도를 측정하여 방사되는초음파의 음압진폭을 구한 결과 단순압착 정압의 약 2.8 %에 불과했으나 초음파 주기에 따른 양력의 변회는 착유효율증가에 매우 효율적임을 확인할 수 있었다.