• 제목/요약/키워드: Lacquer Layer

검색결과 44건 처리시간 0.025초

순창 운림리 농소고분 출토 목관 칠 분석을 통한 제작방법 연구 (Lacquer Layers and Making Methods of the Wooden Coffin Excavated from the Nongso Tomb of Unrimri, Sunchang in Korea)

  • 이혜연
    • 보존과학회지
    • /
    • 제33권5호
    • /
    • pp.355-362
    • /
    • 2017
  • 순창 농소고분은 적성면 운림리 일대와 내월리 농소마을을 둘러 형성된 구릉지 능선에 위치하고 있다. 고분의 토광은 비교적 깊은 곳에 조성되어 도굴의 피해가 없었으며 전체적으로 다량의 숯으로 채워져 있어 목관이 비교적 좋은 상태로 출토되었다. 고분 구조 및 매장시설, 출토 유물, 방사선탄소연대 측정 결과를 종합하였을 때 농소 고분의 축조시기는 고려시대 후기부터 조선 초기까지로 추정하고 있다. 농소고분에서 출토된 목관은 목곽과 목관의 2중 구조로 목관 외면에 두껍게 옻칠을 하고 금색 문자와 흰색 문양으로 장식되었다. 안료 분석 결과 금색 문자는 금(Au), 흰색 문양은 은(Ag)이 주요 성분으로 확인되었다. 칠 막은 안료 층, 황갈색 층, 검은 층의 3개 층으로 관찰되었다. 검은 층은 그을음과 같은 검은 물질로 목재 바탕의 밑칠로 사용되었다. 황갈색 층은 옻칠로서 정제칠로 추정된다. 목관 칠막 분석을 종합하면 칠 제작방법은 금박을 이용하는 방법과 금분을 이용하는 방법으로 추정된다. 안료 형태 및 내부 구조상으로는 금박이 유력하지만 표현된 글자의 형태를 보면 금분을 이용한 것으로 보인다. 따라서 향후 금박과 금분을 이용한 재현실험을 통하여 제작방법을 확인한다면 고분 축조 당시 칠기 제작기술을 파악하는데 중요한 자료가 될 것이다.

다호리 출토 판상 칠기의 재질 분석 (Analysis of Flat Board-shaped Lacquer ware Excavated from Daho-ri in Changwon, Korea)

  • 김수철;박민수;윤은영
    • 박물관보존과학
    • /
    • 제13권
    • /
    • pp.33-36
    • /
    • 2012
  • 다호리 유적에서 출토된 판상칠기에 대하여 수종 및 칠 도막, 금속장식 분석을 실시하였다. 판상칠기에 사용된 수종은 소나무류로 식별되었고 칠 도막의 현미경 관찰 결과, 총 5회의 칠을 했으며 칠 전체 두께는 약 100 ㎛이다. 적외선 분광 분석을 통해 정제칠과 비교하여 옻칠임을 확인하였다. 원형의 금속장식에 대한 성분 분석 결과는 주석과 납의 이원계 합금으로 백랍(白蠟, Pewter)이라 불리는, 주석을 주체로 하는 합금으로 확인되었다. 더불어 지금까지 조사된 다호리 유적 출토 유물의 수종이 활엽수재였던 것에 반해 판상칠기의 목재는 침엽수재인 소나무류로 밝혀졌다.

옻칠한지의 제조 및 특성 (The Characteristics of Hanji Prepared with Lacquer)

  • 조현진;이상극;노정관
    • 펄프종이기술
    • /
    • 제39권3호
    • /
    • pp.70-76
    • /
    • 2007
  • The raw oriental lacquer produced in China was used in this study. This lacquer was diluted with ethanol and terpene in different solvent ratios. The diluted lacquer in the solvents had two layers. The upper layer was solvent soluble and the lower contained precipitates. Hanji was treated with the solvent solubles and the mixture containing precipitates, and then properties of the Hanji were evaluated. The average weight, thickness, and density of Hanji treated with oriental lacquer tended to gradually be decreased as the lower concentration of lacquer was used and as the solvent soluble was treated. Tensile strength of the treated Hanji decreased when the diluted lacquer was used and Hanji treated with terpene dilution at the ratio of lacquer to solvent of 1:5 (v/v) showed higher tensile strength than ones treated with ethanol dilution. The folding endurance decreased as the less concentrated lacquer was used and the highest value was obtained when 1:40 (v/v) of lacquer to solvent ratio in both ethanol and terpene mixture. Absorption ratio was higher in the Hanji treated with ethanol mixture, treated with the lacquer in lower concentration, and treated with ethanol mixture. Hanji treated with ethanol dilution at 1:20 (v/v) and the lower ratio of lacquer to solvent showed a hydrophobic property. Amount of the bound dye materials tended to be decreasing as the concentration of lacquer became lower and it was higher in Hanji treated with ethanol mixture than with terpene mixture.

Investigation of Wood Species and Conservation Status of Wooden Seated Amitabha Buddha Triad and Wooden Amitabha Buddha Altarpiece of Yongmunsa Temple, Yecheon, Korea (Treasure)

  • CHOI, Jaewan;PARK, Junghae;KIM, Soochul
    • Journal of the Korean Wood Science and Technology
    • /
    • 제50권3호
    • /
    • pp.193-217
    • /
    • 2022
  • The Wooden Seated Amitabha Buddha Triad and Altarpiece have not been the subjects of definitive species identification and scientific analysis. In this study, visual investigation, portable X-ray fluorescence (p-XRF), species identification, and lacquer layer observations were carried out to determine the original materials and conservation status. Cracks, exfoliation and discoloration were detected during the visual investigation. The p-XRF data indicated that chrome oxide green, malachite, gold, cadmium red, cinnabar, minium, hematite, lead white, ink stick (Carbon), and copper were used for pigments and the coronet accessory. Tilia spp., Abies spp., and Pinus spp. were identified from both the Buddha Triad and Altarpiece. Finally, lacquer layer analyses of the base layer, lacquer layer, orange pigment layer, and gold leaf layer observed modern synthetic pigments likely used in previous conservation. As the Korean Cultural Heritage Charter and the International Charter for the Conservation and Restoration of Monuments and Sites clearly state that objects of cultural heritage must be conserved using their original materials, future conservation of these objects should utilize the data obtained in this study to employ traditional materials. Furthermore, a deterioration map diagnosis can be applied together with the obtained analysis data to understand the conservation status of and inform an appropriate and authentic conservation treatment for the Buddha Triad and Altarpiece.

김해 대성동 88호분 출토 칠도막 분석 (Analysis of Lacquer Coating Found from Daesungdong No.88 Tomb of Gimhae)

  • 임지영;오카다 후미오
    • 보존과학회지
    • /
    • 제34권1호
    • /
    • pp.51-57
    • /
    • 2018
  • 본고는 김해 대성동 88호분에서 출토된 칠기편을 분석하고 조사한 내용이다. 잔편으로 수습된 칠기편을 광학현미경으로 관찰하고, SEM-EDS와 FT-IR 분석을 통하여 제작기법과 칠기의 구조를 파악하였다. 조사결과 목제바탕에 직물을 바르고 바탕칠을 한 목심저피칠기(木心苧被漆器)로 나타났다. SEM-EDS 분석 결과 바탕칠에는 골분이 혼합된 것이 확인되었다. 칠기 제작에 골분을 사용하는 기법은 중국 한대 칠기의 특징으로 알려져 있으며, 낙랑칠기와 삼국, 통일신라시대 칠기에서도 확인된다. 칠기제작에 사용된 목재의 수종은 서안 동한묘(西安 東漢墓)에서 출토된 칼집의 수종 특징과 상통하며, 칠기 내면에 견직물이 부착된 특징적인 구조를 보이고 있다. 88호분 출토 칠기편은 한반도 남부지역에서 확인된 골분 혼합 칠기 중 가장 선행하는 자료일 뿐만 아니라 당시 금관가야의 대외교류 관계를 알려주는 자료로도 주목된다.

경산 임당유적 목제품 보존 - 갑옷틀 및 칠기 - (Conservation for Wooden Objects Excavated From Imdang, KyungSan - Wooden frame of Armor and Lacquer Wares -)

  • 김수철;이용희;이효선
    • 박물관보존과학
    • /
    • 제7권
    • /
    • pp.53-62
    • /
    • 2006
  • 경산 임당저습지유적에서 출토된 목제 갑옷틀과 다양한 칠기유물들은 재질이 매우 취약하고 옻칠이 되어 있어 공기 중에 노출되면 건조가 진행되어 곧바로 수축·변형이 일어나기 쉽다. 목제 갑옷틀의 경우 대형으로 동결건조과정 중 융해의 발생우려가 있고 칠기의 경우 목재표면에 옻칠이 되어있어 약제가 잘 침투되지 않고 처리 중 칠막이 부풀거나 탈락될 우려가 높다. 따라서 목제 갑옷틀은 진공 동결건조과정 중 융해방지를 위하여 t-butanol로 치환한 후 최종 PEG#3,350 43%의 t-butanol용액에 함침하고, 칠기는 최종 PEG#3,350 40%의 수용액(水溶液)에 실온에서 함침처리 후 동결 건조하여 보존처리 하였다. 칠기의 칠 도막 분석결과 뚜껑 및 고배는 초칠을 한 후 밑층에 흑색안료(그을음)와 옻칠을 혼합하여 바른 후 2-3회 생칠을 하였고 주칠 컵형목기는 밑층에 흑색안료와 옻칠을 혼합하여 바른 후 그 위에 1회 중칠을 하였으며, 산화철(Fe2O3: 석간주)이 붉은 칠의 발색안료로 쓰였을 가능성을 보여준다.

옻칠한지의 제조 및 특성 (The Characteristics of Hanji Prepared with Lacquer)

  • 조현진;이상극;노정관
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2007년도 춘계학술대회논문집
    • /
    • pp.380-390
    • /
    • 2007
  • The purpose of this study is to make a functional Hanji treated with an oriental lacquer which has various functionalities. The raw oriental lacquer produced in China was used in this study This lacquer was diluted with ethanol and terpene in different solvent ratios. The diluted lacquer in the solvents had two layers. The upper layer was solvent soluble and the lower contained precipitates. Hanji was treated with the solvent solubles and the mixture containing precipitates, and then properties of the Hanji were evaluated. The oriental lacquer consisted of 25.04% of water, 60% of urushiol, 3.13% of nitrogen-containing compounds, and 5.66% of gum. The pH of oriental lacquer was 5.3 and the viscosity was 1680 cP. The average weight, thickness, and density of Hanji treated with oriental lacquer tended to gradually decreased as the lower concentration of lacquer was used and as the solvent soluble was treated. Tensile strength of the treated Hanji decreased when the diluted lacquer was used and Hanji treated with terpene dilutes at the ratio of lacquer to solvent of 1:5 (v/v) showed higher tensile strength than ones treated with ethanol dilutes. The folding endurance decreased as the less concentrated lacquer was used and the highest value was obtained when 1:40 (v/v) of lacquer to solvent ratio in both ethanol and terpene mixture. Absorption ratio was higher in the Hanji treated with ethanol mixture, treated with the lacquer in higher concentration, and treated with ethanol mixture. Hanji treated with ethanol dilutes at 1:20 (v/v) and the lower ratio of lacquer to solvent showed a hydrophobic property. Amount of the bound dye materials tended to be decreasing as the concentration of lacquer becomes lower and it was higher in Hanji treated with ethanol mixture than with terpene mixture. Color of Hanji treated with the solvent diluted mixture was Y to YR-type, whereas that of Hanji treated with raw oriental lacquer was Y-type, terpene

  • PDF

광주 신창동 유적 출토 목제품의 수종 및 칠 분석 (Analysis for Species and Lacquer Ware of Wooden Objects Excavated from Sinchang-Dong, Gwangju)

  • 김수철;이광희
    • 박물관보존과학
    • /
    • 제9권
    • /
    • pp.95-104
    • /
    • 2008
  • 광주 신창동 유적에서 출토된 목제 유물에 대해 수종분석 37점, 칠분석 3점등총 40점에 대하여 분석하였다. 결과 목제품에 사용된 수종은 상수리나무류, 벚나무류, 살구나무류, 오리나무류, 단풍나무류, 버드나무류, 사시나무류 등으로 총 7종이 식별되었으며, 특히 칠기와 접시 같은 생활용품의 경우에는 모두 산공재 수종을 사용하였다. 칠도막 분석 결과 유공칠기와 통형칠기 동체부 5는 칠한 횟수에서 차이가 있지만 밑칠을 칠한 후 맨 상층에 흑색안료와 칠을 혼합하여 칠하였으며, 5절판은 토분과 흑색안료를 칠과 혼합하여 밑칠을 한 후에 상층에 흑색안료를 혼합한 칠을 칠한 것으로 확인되었다.

울산지역 원삼국시대 흑색토기의 재질 및 발색 특성 (Characterization of Materials and Color Formation for Black Potteries from the Proto-Three Kingdoms Period in Ulsan, Korea)

  • 김수경;장성윤;이찬희
    • 보존과학회지
    • /
    • 제37권2호
    • /
    • pp.77-89
    • /
    • 2021
  • 이 연구에서는 울산의 원삼국시대 장현동과 중산동 및 교동리 유적에서 출토된 흑색토기에 대하여 태토의 재료학적 특성과 제작기술을 검토하였다. 흑색토기의 표면은 흑색이지만 속심은 흑색 또는 적황색을 보인다. 현미경 관찰 결과, 태토는 붉은색 철산화물이 풍부한 토양을 사용하였으며 주로 석영과 알칼리 장석 및 운모류가 동정되었고, 부분적으로 미르메카이트 조직의 입자가 관찰된다. 또한 SiO2와 Fe2O3 및 CaO 함량에서 다소 차이가 있는 것으로 보아, 각 유적지 주변에 분포하는 모암과 태토의 조성이 영향을 준 것으로 판단되며 근거리에서 채토하여 토기를 제작한 것으로 보인다. 라만분광분석 결과, 이 토기의 흑색층에는 비정질 탄소인 연매가 사용되었다. 표면층과 접하는 기질에서는 투명한 갈색의 칠이 관찰되었고 탄소가 농집된 것으로 보아, 흑색층은 연매와 옻을 칠하여 흑색발색을 유도한 것으로 해석된다. 태토의 광물조성과 미세조직으로 볼 때 이 토기의 소성온도는 750~850℃의 범위로 추정되며, 칠은 468℃에서 열분해되었다. 따라서 흑색을 이루는 연매와 칠의 혼합층은 소지의 소성 이후에 칠해진 것으로 판단된다.

광주 신창동 저습지 유적 목제 및 칠기의 보존 (Conservation for Wooden Objects and Lacquer Wares Excavated From Sinchang-dong, Gwangju)

  • 김수철;박영만
    • 박물관보존과학
    • /
    • 제7권
    • /
    • pp.43-51
    • /
    • 2006
  • 광주 신창동 저습지유적에서 다양한 목재유물과 더불어 목재표면에 옻칠이 된 칠기들이 다량으로 출토되었다. 칠기들은 목질부가 열화 되어 취약하며 칠층이 들떠있어 박락과 갈라짐의 발생우려가 높다. 따라서 진공 동결건조에 효과적인 PEG#4000 40%로 함침처리 하였고 동결건조의 종료온도를 0℃이하로 하였다. 동결건조 직후 목제와 칠기의 중량과 상대습도 60% 의 밀폐공간에서 방치 후 중량을 비교하였다. 그 결과 중량변화가 없었으므로 동결건조 중 종료 온도 조절로써 건조 후 목재함유수분조절과 대기 중 습도변화에 안정성을 확인하였다. 칠도막 분석결과 밑층에 흑색안료를 혼합하여 목재표면에 밑칠을 하고 칠층의 상부에 옻칠과 흑색안료를 혼합하여 3~4회 칠한 것과 검은 밑칠을 하지 않고 칠층에 옻칠과 흑색 안료를 혼합하여 3~4회 칠한 것으로 확인되었다.