• Economic and Environmental Geology
• /
• v.26 no.4
• /
• pp.519-539
• /
• 1993

A total of 264 independently oriented core samples were collected from 26 sites in the southwestern part (the Naktong Trough) of the Cretaceous $Ky{\check{o}}ngsang$ Basin in south Korea. The sampled formations comprise the sedimentary Shindong and the Hayang Groups of the Lower Cretaceous age. Alternating field and thermal demagnetizations were conducted. Characteristic remanent magnetization (ChRM) was relatively easily isolated in each formation except in the Chinju formation, from which only remagnetization circles were observed. Even though an extensive use of the fold test was not possible due to the nearly homoclinal nature of the strata in the area, we believe that the ChRM of each formation is of primary origin based on the following grounds: The in-situ ChRM direction of each formation is different from the present geomagnetic field direction. Fisherian precision parameter becomes enhanced through the tilt correction in all formations, closely to the values required for a positive fold test. Three out of the five studied formations pass the reversal test. The mean palaeomagnetic pole position from the studied area is found to be statistically different from the contemporary pole from the Chinese block exclusive of the Shandong area. The difference in magnetic declination suggests a $14.5^{\circ}$ (${\pm}10.5^{\circ}$) clockwise rotation of the studied area relative to the Chinese block comprising the west of the Tan-Lu fault. On the other hand, any significant difference in magnetic inclination and concurrent palaeolatitude is not observed between the studied area and China as well as the other area (Taegu-Andong area) in the $Ky{\check{o}}ngsang$ Basin. The dual nature of the magnetic polarity confirmed in all formations suggests an older than 124 Ma (Neocomian or older) age of the studied sedimentary strata.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.2
• /
• pp.161-167
• /
• 2015

Nowadays, all the world face to the global warming problems due to the emission of $CO_2$. From the previous studies, recycled aggregates were used as an alkali activator in blast furnace slag to achieve zero-cement concrete, and favorable results of obtaining strength were achieved. In this study, gypsum and incineration waste ash were used as the additional alkali activation and effects of the gypsum and incineration waste ash to enhance the performance of the mortar were tested. Results showed that although the replacement ratio of 0.5% of incineration waste ash and 20% of anhydrous gypsum resulted in the low of mortar at the early age, while it improved the later strength and achieved the similar strength to that of conventional mortar (at 91 days).

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2012

We compared the dietary behaviors and living habits of Han Children living in both China and Korea to find any influences from the different living environments. Three hundred $5^{th}$ and $6^{th}$ -grade children in China and two hundred thirty three $5^{th}$ and $6^{th}$ -grade children in a Chinese school in Korea were surveyed via questionnaire. Mean BMI was higher and sleeping hours were lower in the children living in Korea compared to the children living in China. Mean age and education level of the parents were higher in the children living in Korea. Most of the dietary behaviors discovered via the questionnaire showed similar tendencies in the two groups. However, in terms of skipping breakfast, deviating in food habits, snacking before sleeping, and snacking right after eating a meal, the children living in Korea showed significantly higher frequencies. Also, children living in Korea showed significantly lower frequencies of overeating, snacking while watching TV or using the computer, and eating food when stressed, than children living in China. In living habits, children living in Korea do less regular exercise and use buses or cars more frequently for short distance transportation and spend more time to watch TV or computer than the children living in China. Therefore, it seems that different living environments may somewhat influence the dietary behaviors and living habits of children even if they have the same ethnic background.

• Structural Engineering and Mechanics
• /
• v.56 no.5
• /
• pp.813-833
• /
• 2015

Spherical reticulated shells are widely applied in structural engineering due to their good bearing capability and attractive appearance. Parametric modeling of spherical reticulated shells is the basis of internal analysis and optimization design. In the present study, generation methods of nodes and the corresponding connection methods of rod elements are proposed. Modeling programs are compiled by adopting the ANSYS Parametric Design Language (APDL). A shape optimization method based on the two-stage algorithm is presented, and the corresponding optimization program is compiled in FORTRAN environment. Shape optimization is carried out based on the objective function of the minimum total steel consumption and the restriction condition of strength, stiffness, slenderness ratio, stability. The shape optimization of four typical Schwedler spherical reticulated shells is calculated with the span of 30 m~80 m and rise to span ratio of 1/7~1/2. Compared with the shape optimization results, the variation rules of total steel consumption along with the span and rise to span ratio are discussed. The results show that: (1) The left and right rod-Schwedler spherical reticulated shell is the most optimized and should be preferentially adopted in structural engineering. (2) The left diagonal rod-Schwedler spherical reticulated shell is second only to left and right rod regarding the mechanical behavior and optimized results. It can be applied to medium and small-span structures. (3) Double slash rod-Schwedler spherical reticulated shell is advantageous in mechanical behavior but with the largest total weight. Thus, this type can be used in large-span structures as far as possible. (4) The mechanical performance of no latitudinal rod-Schwedler spherical reticulated shell is the worst and with the second largest weight. Thus, this spherical reticulated shell should not be adopted generally in engineering.

• Steel and Composite Structures
• /
• v.18 no.5
• /
• pp.1083-1101
• /
• 2015

Previous theoretical equations for the shear capacity of steel beam to concrete filled steel tube (CFT) column connections vary in the assumptions for the shear deformation mechanisms and adopt different equations for calculating shear strength of each component (steel tube webs, steel tube flanges, diaphragms, and concrete etc.); thus result in different equations for calculating shear strength of the joint. Besides, shear force-deformation relations of the joint, needed for estimating building drift, are not well developed at the present. This paper compares previously proposed equations for joint shear capacity, discusses the shear deformation mechanism of the joint, and suggests recommendations for obtaining more accurate predictions. Finite element analyses of internal diaphragm connections to CFT columns were carried out in ABAQUS. ABAQUS results and theoretical estimations of the shear capacities were then used to calibrate rotational springs in joint elements in OpenSEES simulating the shear deformation behavior of the joint. The ABAQUS and OpenSEES results were validated with experimental results available. Results show that: (1) shear deformation of the steel tube dominates the deformation of the joint; while the thickness of the diaphragms has a negligible effect; (2) in OpenSEES simulation, the joint behavior is highly dependent on the yielding strength given to the rotational spring; and (3) axial force ratio has a significant effect on the joint deformation of the specimen analyzed. Finally, modified joint shear force-deformation relations are proposed based on previous theory.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.1
• /
• pp.44-50
• /
• 2008

A geochemical technique based on rare earth element geochemistry was used to clarity the source of the Asian dust (Yellow sand) in the Daejeon area. The Asian dusts were collected 4 times during 31th March- 2nd April and 25th May-27th May 2007. The Yellow sand shows PAAS (Post Archean Australian Shale)-normalized REE pattern of the flattened LREE and slightly depleted LREE without Eu anomaly, whereas the Daejeon soil has slightly enriched LREE and depleted HREE with negative Eu anomaly. Our results show that REE patterns of the Asian dust are LREE-flattened similar to those of the sediment from the south-eastern part of Ordos desert. This suggests that Asian dust in the Daejeon area might be derived from the south-eastern part of Ordos desert.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.2
• /
• pp.128-135
• /
• 2005

Mixed-mode hydrophobic/ionic matrices exhibit a salt-tolerant property for adsorbing target protein from high-ionic strength feedstock, which allows the application of undiluted feedstock via an expanded bed process. In the present work, a new type of mixed-mode adsorbent designed for expanded bed adsorption, Fastline $PRO^{\circledR}$, was challenged for the capture of nattokinase from the high ionic fermentation broth of Bacillus subtilis. Two important factors, pH and ion concentration, were investigated with regard to the performance of nattokinase ad-sorption. Under initial fermentation broth conditions (pH 6.6 and conductivity of 10 mS/cm) the adsorption capacity of nattokinase with Fastline PRO was high, with a maximum capacity of 5,350 U/mL adsorbent. The elution behaviors were investigated using packed bed adsorption experiments, which demonstrated that the effective desorption of nattokinase could be achieved by effecting a pH of 9.5. The biomass pulse response experiments were carried out in order to evaluate the biomass/adsorbent interactions between Bacillus subtilis cells and Fastline PRO, and to demonstrate a stable expanded bed in the feedstock containing Bacillus subtilis cells. Finally, an EBA process, utilizing mixed-mode Fastline PRO adsorbent, was optimized to capture nattokinase directly from the fermentation broth. The purification factor reached 12.3, thereby demonstrating the advantages of the mixed-mode EBA in enzyme separation.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1945-1955
• /
• 2018

High frequency signal injection (HFI) is an alternative method for estimating rotor position of interior permanent magnet synchronous motor (IPMSM). The general method of frequency and amplitude selection is based on error tolerance and experiments, and is usually set with only one group of HF parameters, which is not efficient for different working modes. This paper proposes a novel rotor position estimation scheme by HFI with optimized frequency and amplitude, based on the mathematic model of IPMSM. The requirements for standstill and low-speed operational modes are met by applying this novel scheme. Additionally, the effects of the frequency and amplitude of the injected HF signal on the position estimation results under different operating conditions are analyzed. Furthermore, an optimization method for HF parameter selection is proposed to make the estimation process more efficient under different working conditions according to error tolerance. The effectiveness of the propose scheme is verified by the experiments on an IPMSM motor prototype.

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.355-365
• /
• 2010

As a port city, Qingdao had been developed through the 4 stages during the first half of the 20th century. First stage is German Occupation period. In this period, the old downtown of Qingdao was formed and the existing architectural characteristics of Qingdao had been established. Second stage is the First Japanese Occupation period. Japanese transformed Qingdao into Japanese city and expanded city area to north and east. Third stage is Northern Warlords and the National Government period. In this period, Qingdao had been developed as an international city of world trade and vacation. Forth stage is the Second Japanese Occupation period. Japanese tried to change Qingdao as a military base for the invasion of the northern China.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.393-396
• /
• 2004

본 논문에서는 완충층용 MgO 박막을 P-type(100)Si 기판위에 작업가스 $Ar:O_2=80:20$, RF 파워 50W, 기판온도 $400^{\circ}C$, 10mtorr의 작업진공에서 $500{\AA}$ 증착하였다. 제작된 MgO/Si 기판위에 RF Magnetron sputtering법으로 작업가스 $Ar:O_2$의 비율을 90:10, 80:20, 70:30으로 변화하면서 $BST(Ba_{0.5}Sr_{0.5}TiO_3)$ 박막을 약 $2000{\AA}$ 증착하였다. XRD 측정결과 작업가스비의 변화에 관계없이(110)BST와 (111)BST 피크만이 관찰되었으며 작업가스 $Ar:O_2=80:20$에서 가장 양호한 결정성을 나타내었다. I-V 측정결과 인가전계 ${\pm}100kV/cm$에서 $10^{-7}A/cm^2$이하의 양호한 누설전류 특성을 보여주고 있으며 C-V 측정결과 작업가스 $Ar:O_2$의 비율 90:10, 80:20, 70:30에서의 비유전율은 각각 283, 305, 296으로서 작업가스비 80:20에서 제작된 박막의 특성이 가장 우수하였다. 작업가스비 80:20에서 제작된 박막의 SEM 측정결과 결정이 성장되었음을 확인할 수 있었고 그레인의 크기는 약 10nm였다.