• Title/Summary/Keyword: LI지수

Search Result 141, Processing Time 0.022 seconds

Study of the Inhibition on the Combustion of PEBAX/AP Thermoplastic Propellant (PEBAX/AP 열가소성 고체추진제의 연소 억제 방안 연구)

  • Lee, Hyoungjin;Jung, Haeyoung;Cho, Junhyun;Lee, Youngguen;Lee, Hojin
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.17 no.5
    • /
    • pp.18-26
    • /
    • 2013
  • This study suggested techniques to reduce burning rate and their effects for the AP thermoplastic composite propellant. Burning rate obtained through ground tests using a small size motor were analyzed to investigate the effects of AP particle size and LiF of 0.5~2.0% on the inhibition reaction for the PEBAX/AP thermoplastic propellant. The results showed that utilization of large size particle of AP and addition of LiF under 2.0% can reduce the burning rate sufficiently and their quantitative effects were suggested in this paper.

A Study on Extraction of Croplands Located nearby Coastal Areas Using High-Resolution Satellite Imagery and LiDAR Data (고해상도 위성영상과 LiDAR 자료를 활용한 해안지역에 인접한 농경지 추출에 관한 연구)

  • Choung, Yun-Jae
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.18 no.1
    • /
    • pp.170-181
    • /
    • 2015
  • A research on extracting croplands located nearby coastal areas using the spatial information data sets is the important task for managing the agricultural products in coastal areas. This research aims to extract the various croplands(croplands on mountains and croplands on plain areas) located nearby coastal areas using the KOMPSAT-2 imagery, the high-resolution satellite imagery, and the airborne topographic LiDAR(Light Detection And Ranging) data acquired in coastal areas of Uljin, Korea. Firstly, the NDVI(Normalized Difference Vegetation Index) imagery is generated from the KOMPSAT-2 imagery, and the vegetation areas are extracted from the NDVI imagery by using the appropriate threshold. Then, the DSM(Digital Surface Model) and DEM(Digital Elevation Model) are generated from the LiDAR data by using interpolation method, and the CHM(Canopy Height Model) is generated using the differences of the pixel values of the DSM and DEM. Then the plain areas are extracted from the CHM by using the appropriate threshold. The low slope areas are also extracted from the slope map generated using the pixel values of the DEM. Finally, the areas of intersection of the vegetation areas, the plain areas and the low slope areas are extracted with the areas higher than the threshold and they are defined as the croplands located nearby coastal areas. The statistical results show that 85% of the croplands on plain areas and 15% of the croplands on mountains located nearby coastal areas are extracted by using the proposed methodology.

A Research on Autonomous Mobile LiDAR Performance between Lab and Field Environment (자율주행차량 모바일 LiDAR의 실내외 성능 비교 연구)

  • Ji yoon Kim;Bum jin Park;Jisoo Kim
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.22 no.4
    • /
    • pp.194-210
    • /
    • 2023
  • LiDAR plays a key role in autonomous vehicles, where it is used to detect the environment in place of the driver's eyes, and its role is expanding. In recent years, there has been a growing need to test the performance of LiDARs installed in autonomous vehicles. Many LiDAR performance tests have been conducted in simulated and indoor(lab) environments, but the number of tests in outdoor(field) and real-world road environments has been minimal. In this study, we compared LiDAR performance under the same conditions lab and field to determine the relationship between lab and field tests and to establish the characteristics and roles of each test environment. The experimental results showed that LiDAR detection performance varies depending on the lighting environment (direct sunlight, led) and the detected object. In particular, the effect of decreasing intensity due to increasing distance and rainfall is greater outdoors, suggesting that both lab and field experiments are necessary when testing LiDAR detection performance on objects. The results of this study are expected to be useful for organizations conducting research on the use of LiDAR sensors and facilities for LiDAR sensors.

Volatility Spillover Effects between BDI with CCFI and SCFI Shipping Freight Indices (BDI와 CCFI 및 BDI와 SCFI 운임지수 사이의 변동성 파급 효과)

  • Meng-Hua Li;Sok-Tae Kim
    • Korea Trade Review
    • /
    • v.48 no.1
    • /
    • pp.127-163
    • /
    • 2023
  • The objective of this study is to investigate the volatility spillover effects among BDI, CCFI and SCFI. This paper will divide the empirical analysis section into two periods to analyze and compare the differences in volatility spillover effect between shipping freight indices before and after the outbreak of COVID-19 separately. First, in order to compare the mean spillover impact and index lead-lag correlations in BDI and CCFI indices, along with BDI and SCFI indices before and after COVID-19, the co-integration analysis and the test of Granger causality built on the VAR model were utilized. Second, the impulse response and variance decomposition are employed in this work to investigate how the shipping freight index responds to shocks experienced by itself and other freight indices in a short period. Before the COVID-19 epidemic, the results demonstrated that the BDI freight index is the Granger cause of the variable CCFI freight index. But the BDI and CCFI freight indices have no apparent lead-lag relationships after COVID-19, and this empirical result echoes the cointegration test result. After the COVID-19 epidemic, the SCFI index leads the BDI index. This study employs the VAR-BEKK-GARCH joint model to explore the volatility spillover results between dry bulk and container transport markets before and after COVID-19. The empirical results demonstrate that after COVID-19, fluctuations in the BDI index still affect the CCFI index in the maritime market. However, there is no proof of a volatility spillover relationship between the BDI and SCFI after the COVID-19 epidemic. This study will provide an insight into the volatility relationship among BDI, CCFI and SCFI before and after the the COVID-19 epidemic occurred.

Effect of corrosive water quality control and corrosion index monitoring in pilot scale pipeline simulator (파일럿 규모 모의관로에서 부식성 수질제어 효과와 부식지수 모니터링)

  • Kim, Do-Hwan;Kim, Yung-Jin;Son, Hee-Jong;Ryou, Dong-Choon;Ahn, Jun-Young;Kim, Cheolyong;Hwang, In-Seong
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.32 no.2
    • /
    • pp.183-192
    • /
    • 2018
  • Applicability of corrosion inhibitor was evaluated using pilot scale water distribution pipe simulator. Calcium hydroxide was used as corrosion inhibitor and the corrosion indices of the water were investigated. Corrosion indices, Langelier saturation index (LI) increased by 0.8 and calcium carbonate precipitation potential (CCPP) increased by 9.8 mg/L. This indicated that corrosivity of water decreased by corrosion inhibitor and the effects lasted for 18 days. Optimum calcium hydroxide dose was found to be 3~5 mg/L for corrosion inhibition. We suggest that monitoring of CCPP as well as LI need to be conducted to control corrosivity of water.

Experimental Study on the Determination of Absorbed dose Index (흡수선량지수결정(吸收線量指數決定)에 관한 실험적(實驗的) 연구(硏究))

  • Jun, Jae-Shik;Rho, Chae-Shik;Ro, Seung-Gy;Ha, Chung-Woo;Yoo, Young-Soo;Lee, Hyun-Duk
    • Journal of Radiation Protection and Research
    • /
    • v.7 no.1
    • /
    • pp.34-48
    • /
    • 1982
  • The prime purpose of this study is to realize an index quantity, absorbed dose index, defined by the ICRU for the characterization of ambient radiation level at any location for the purpose of radiation protection. The experiment has been designed to be carried out in two phases, namely, preliminary and main experiment. In the primary study a 30cm diameter sphere of polyethylene was used, while in the main experiment that of tissue equivalent material was fabricated and used. Both experiments were performed in the gamma-ray fields of $^{137}Cs\;and\;^{60}Co$, and in a neutron beam of thermal column of the TRIGA MARK-II research reactor. In the measurement of gamma-ray absorbed dose TLD-700 $(^{7}LiF)$ chips were used, and for the neutron dose both Au activation foils and TLD chips (TLD-600 $(^{6}LiF)$ and TLD-700 for the discrimination of gamma-ray contribution) were used. Theoretical assessment of the absorbed dose in the sphere phantom has been carried out in accordance with the Ehrlich's idea that deduced on the basis of Burlin's cavity theory in the case of gamma-ray irradiation. For the analysis of neutron dose fluence-KERMA rate conversion method was used. The explanation on the dose assessment is given in detail. Results obtained were numerically and statistically analyzed and the depth dose distributions are presented in the graphic forms with normalized values. In the concluding remarks, the possibility and difficulty of realizing the index quantity, including questions and problems to be solved are mentioned.

  • PDF

Synthesis of Li2MnSiO4 by Solid-state Reaction (고상반응법을 이용한 Li2MnSiO4 합성)

  • Kim, Ji-Su;Shim, Joong-Pyo;Park, Gyung-Se;Sun, Ho-Jung
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.25 no.5
    • /
    • pp.398-402
    • /
    • 2012
  • Synthesis of $Li_2MnSiO_4$ was attempted by the conventional solid-state reaction method, and the phase formation behavior according to the change of the calcination condition was investigated. When the mixture of the three source materials, $Li_2O$, MnO and $SiO_2$ powders, were used for calcination in air, it was difficult to develop the $Li_2MnSiO_4$ phase because the oxidation number of $Mn^{2+}$ could not be maintained. Therefore, two-step calcination was applied: $Li_2SiO_3$ was made from $Li_2O$ and $SiO_2$ at the first step, and $Li_2MnSiO_4$ was synthesized from $Li_2SiO_3$ and MnO at the second step. It was easy to make $Li_2MnSiO_3$ from $Li_2O$ and $SiO_2$. $Li_2MnSiO_4$ single phase was developed by the calcination at $900^{\circ}C$ for 24 hr in Ar atmosphere as the oxidation of $Mn^{2+}$ was prevented. However, the $Li_2MnSiO_4$ was ${\gamma}-Li_2MnSiO_4$, one of the polymorph of $Li_2MnSiO_4$, which could not be used as the cathode materials in Li-ion batteries. By applying the additional low temperature annealing at $400^{\circ}C$, the single phase ${\beta}-Li_2MnSiO_4$ powder was synthesized successfully through the phase transition from ${\gamma}$ to ${\beta}$ phase.

A Clinical Effect of Electro-Acupuncture Stimulation Therapy on TMD Patients (측두하악장애환자에 대한 저주파 전자침 자극요법의 임상효과)

  • Park, Tae-Sik;Park, June-Sang;Ko, Myung-Yun
    • Journal of Oral Medicine and Pain
    • /
    • v.25 no.3
    • /
    • pp.315-323
    • /
    • 2000
  • 측두하악장애의 치료에 이용되는 저주파 전자침 자극요법의 임상적 효과를 평가하기 위하여 치료를 시행한 28명과 치료를 전혀 시행하지 않은 10명의 대조군을 대상으로 치료전과 치료 2주 후에 경혈점의 압력통각역치와 임상지수를 측정하여 다음과 같은 결론을 얻었다. 1. 환자군에서 저주파 전자침 자극요법을 시행하기 전과 후의 임상지수가 유의하게 변화하였다(P<0.001). 2. 환자군에서 저주파 전자침 자극요법을 시행하기 전과 후의 압력통각역치는 G2, G21, Li4, S2, S3, S8, Si19 및 T17에서 유의하게 증가하였다(P<0.05). 3. 대조군에서 임상지수와 압력통각역치는 실험 전후에 차이가 없었다. 4. 환자군의 임상지수가 대조군에 비하여 유의하게 변화하였다 (P<0.05). 본 연구는 저주파 전자침 자극요법의 주관적 뿐만 아니라 임상적인 효과를 보여줌으로써 측두하악장애환자의 치료에서 저주파 전자침 자극요법이 유용한 방법임을 제시하였다.

  • PDF

Electrochemical Properties of LiMPO4(M = Fe, Mn) Synthesized by Sol-Gel Method (졸-겔법에 의해 제조된 LiMPO4(M = Fe, Mn) 양극 활물질의 전기화학적 특성)

  • Kim, Jae-Kwang;Baek, Dong-Ho;Shin, Yong-Jo;Ahn, Jou-Hyeon;Seo, Yang-Gon;Kim, Chi-Su;Yoon, Seok-Jun;Cho, Myung-Hun
    • Journal of the Korean Electrochemical Society
    • /
    • v.11 no.2
    • /
    • pp.120-124
    • /
    • 2008
  • Carbon-coated $LiFePO_4$ and $LiMn_{0.4}Fe_{0.6}PO_4$ cathode materials for lithium batteries were synthesized by a sol-gel method. X-ray diffraction and scanning electron microscopy data showed that the cathode materials are pure crystalline and are surrounded by porous carbon. The initial discharge capacities of $LiFePO_4$ and $LiMn_{0.4}Fe_{0.6}PO_4$ with the liquid electrolyte of 1M $LiPF_6$ in EC/DMC are 132 mAh/g and 145 mAh/g, respectively, at current density of 0.1 C-rate. $LiFePO_4$ and $LiMn_{0.4}Fe_{0.6}PO_4$ with an electrospun polymer-based electrolyte exhibit initial discharge capacities of 114 and 130 mAh/g at 0.1 C-rate at room temperature, respectively.

Expression of Caspase 3, Survivin, and p53 Protein in Urethane Induced Mouse Lung Carcinogenesis (Urethane으로 유발된 생쥐 폐샘암종 발생과정에서 Caspase 3, Survivin과 p53 단백 발현)

  • Shin, Jong Wook;Lee, Soo Hwan;Park, Eon Sub
    • Tuberculosis and Respiratory Diseases
    • /
    • v.63 no.3
    • /
    • pp.251-260
    • /
    • 2007
  • Purpose: An imbalance of cell proliferation and cell apoptosis is an important mechanism in carcinogenesis. Capase 3, survivin and p53 have been identified as important members of the apoptotic related proteins. This study evaluated the proliferating cell nuclear antigen(PCNA), apoptosis, apoptotic related protein such as capase 3, survivin and p53 using urethane-induced mouse lung carcinogenesis, which provides reproducible steps from hyperplasia to adenocarcinoma. Methods: Urethane was administered to the ICR mice through an intra-peritoneal injection, The mice were sacrificed at 5, 15, and 25 weeks after urethane intervention. The sequential morphological changes and immunohistochemical expression of PCNA, apoptosis, capase 3, survivin, and p53 were examined during mouse lung carcinogenesis. Results: During carcinogenesis, the sequential histological changes were observed from hyperplasia of type II pneumocytes, to anadenoma, and ultimately to an overt adenocarcinoma. The PCNA Labeling index (LI) was 9.6% in hyperplasia, 23.2% in adenoma, and 55.7% in adenocarcinoma, respectively. The apoptotic LI was 0.24% in hyperplasia, 1.25% in adenoma, and 5.27% in adenocarcinoma. A good correlation was observed between the PCNA LI and apoptotic LI. The expression of caspase 3 was remarkable- i.e., 46.7% in adenocarcinoma, in contrast to 15% in hyperplasia and 16% in adenoma. Survivin was detected weakly in the alveolar hyperplasia and showed an increasing expressional pattern in adenoma and adenocarcinoma. p53 expression was detected only in the adenocarcinoma lesions with an expression rate of 13.3%. The level of caspase 3 expression correlated with the increase in the apoptotic index. The positive expression of caspase 3 was associated with an increased apoptotic index. Conclusions: These results suggest that the PCNA LI and apoptotic LI might be useful markers for evaluating the risk of a malignant transformation. In addition, caspase, survivin and p53 might play a role in the early and late steges of urethane-induced mouse lung carcinogenesis.