• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1391-1395
• /
• 2011

In this paper, would implement a transceiver for the visible light communication that based on wireless communication driving technology for LED illumination-based infrared ray communication, and measurement analyzed a design error rate of a transceiver variable rate has made about distance change -2.5m. The error rate measured a voltage variable along illuminate change between switchable circumstances, which has illuminated insight and outright. Each analyzed and measurement on the communication distance errors along the differences of disturbance light between night and days. The LED module has implemented for number of 6 through illumination dimming in case of different values. Also, implementation for the system module of a VLC transceiver based on the infrared sensors which used feedback outcome value has analyzed with error rate.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.290-293
• /
• 2013

본 연구에서는 최근 각광받고 있는 융합기술 중의 하나인 가시광 통신 기술을 개발하고 실제 시제품을 구현하기 위한 시스템 기술에 대해서 기술한다. 전 세계적으로 LED조명 시장이 급성장하고 있고 또한 이를 활용한 가시광통신(visible light communication:VLC) 기술이 화두가 되고 있다. 이에 따라서 본 논문에서는 현재 개발중인 LED기반 VLC 시스템 기술을 송신 및 수신 모듈로 분류하고 개별 모둘에 대한 구체적인 개발 시스템에 대해서 소자 및 주요 부품의 특성을 기반으로 제시한다. 또한 실제 개발된 시스템을 통해 약 0.5m 거리에서 약 12Mbps의 데이터 전송이 가능함을 보인다. 개발된 기술은 가정 내 또는 실내 주차장 등과 같이 실내 측위 또는 데이터 서비스 등에서 중요한 역할을 할 것으로 기대된다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.83-90
• /
• 2019

LED lighting is spreading on the strength of LED lighting, and various government policies are being implemented. VLC research which is a wireless communication technology using lighting has been actively conducted, and it has been proven through many studies that a general LED light source such as a high-speed data transmitter can be used. But from now on, one of the main problems is the noise from side lights, which can be compared to the noise of radio broadcasts. So in this paper, we proposed a noise canceling model to remove the interference of ambient light by using an optical filter for a detachable VLC channel. In order to verify the proposed model, various high brightness RGB LED modules were used for comparative analysis. In addition, the applicability was verified through experiments using High Luminance LED lighting which is applied in real life.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.124-133
• /
• 2017

In the current lighting market, LEDs that have a high luminous efficiency, a long life and consume less power have emerged as next generation lighting. Owing to various designs and sizes of LEDs, the production process of existing LEDs involves many tasks that require manual labor; hence, the assembly of LEDs necessitates manpower. Because of the use of manpower, the production costs of LEDs increases and production efficiency decreases. Recently, the assembly parts of LEDs have been standardized for minimizing manual labor, and an LED is developed as an LED panel. The automatic assembly system produces LED convergent lighting by assembling two LED panels and one diffusion cover. To increase the production efficiency of the LED convergent lighting module, it is important that the development of a feeder can continuously supply the LED panels is required, and whose design has sufficient stability. The automatic assembly system of the LED convergent lighting module consists of two feeders, which convey LED panels and diffusion covers to a main conveyor, which assembles the lifted panels and covers. In this study, structural analysis and fatigue life for forced loads on the conveyer line of the feeder in the process of lifting LED panels and diffusion covers of each feeder, is analyzed. In addition, the drive of the belt constituting the conveyor line of each feeder is simulated, and the dynamic characteristics of the belt is analyzed using the virtual engineering method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.110-112
• /
• 2011

LED조명장치는 기존 광원의 대체품으로 자동차분야, 특수조명, 디스플레이, 항공등 많은 분야에서 활용이 증가하고 있다. 일반적으로 RGB 멀티칩 LED는 천연색 구현이 가능하여 경관조명 또는 감성 조명용으로 적용되고 고출력 백색 LED는 실내외 일반조명 또는 특수조명용으로 적용되고 있으므로 광효율, 연색지수를 증가하기 위한 연구가 계속 진행 중이다. 본 논문에서는 다양한 마이컴 종류 중 하나인 Cypress사의 PSoC을 이용한 LED 조명의 자연광 구현에 대하여 연구하고자 한다. 이를 위해 사이프레스사의 EZ-Color 모듈을 이용한 다양한 색 구현보다 자연광을 구현하기 위한 색온도 가변에 중점을 두고 연구를 수행하였다. 기존에 제시된 날씨와 계절, 시간에 따른 태양광의 색온도 데이터를 이용하여 다양한 색온도를 나타내기 위한 RGB 색혼합 비율에 대해 연구를 수행하였다. 이 연구를 통해 인간을 위한 감성조명의 개발에 참고할 수 있도록 데이터를 제시하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.453-454
• /
• 2008

본 논문은 가로등 LED조명 설계를 위해 LED(Light Emiting Diode)소자 특성 분석 및 시뮬레이션을 통한 광 특성을 개선하고자 하였다. 시뮬레이션은 Geometry 와 Optic 특성을 고려하였으며, 광속, 스펙트럼, 지향각, 조도값 분석을 통해 제품과 시뮬레이션 특성을 비교하였다. 광 특성 개선 설계변수로는 $30^{\circ}C{\sim}50^{\circ}$ 사이의 2차 렌즈를 각도별로 설계하여 35 도 렌즈 각도일 때 최대 조도특성을 확인했으며, LED 모듈간 간격 배치는 3Cm 일 때 가장 높은 조도특성이 나타났다. 9개의 LED모둘 각도를 정면 Angle($\theta1$)과 측면 Angle($\theta2$)으로 구분하여 각도에 따라 배치 시켜본 결과, 정면 Angle($\theta1$)은 0도일 때, 측면 Angle($\theta2$)은 10도 일 때 가장 높은 조도 특성이 나타났다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.743-744
• /
• 2012

LED digital control convergence technology is receiving attention. It enables to analyze lighting and living environments by recognizing user information and situations through a signal process system composed of a multi-functional composite sensor's module. LED lighting is higly efficient, long-lived, environmentally, and is possible to converge with communication, and receiving as a next-generation general lighting that will replace a florescent light including the light bulb. The proposed system is an intelligent LED control system that uses solar light. This study is about a lighting control technology associated with user-estimated information/situation and related low-cost technology. Also, this study aims to embody emotional lighting by appropriately lighting 10% of the discharge current with supplementary colored LED according to the surrounding environment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.359-363
• /
• 2017

The LED (Liquid Emitting Diode) frame device is a big part of the representative display industry in Korea. LED is an essential part for TV, monitor, notebook, and mobile phone. In Japan, Taiwan, China and other countries, investment in LEDs has been strengthened, and productivity has become an important issue. However, as the size of the parts becomes smaller, the inconsistent inspection by the human eye becomes a problem of reliability, so that the automatic inspection process becomes an essential issue in the field of LED module inspection. In this paper, we investigate defects in visual inspection process using computer vision technology. The inspection of the LED frame is made quickly and accurately, thereby improving the efficiency of the process and shortening the inspection time. As a result of applying the inspection system to the field, we confirmed that it is possible to inspect quickly and accurately.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.83-87
• /
• 2015

LED navigation light installed on the ship performs a important role to ensure safety and prevent collisions with other ships. LED navigation light is mainly used in the night and within the limited visibility by smoke, rainfall. In particular, LED navigation light installed with a clear understanding. LED navigation light is consist of LED module, a control board, a converter, a Fresnel lens, such as enclosure. Russian Society of LED navigation light (RMRS) of the ship to be delivered by drying at Daewoo Shipbuilding & Marine Engineering requires guaranteed reliable products at below $-52^{\circ}C$. conventional LED navigation light has to ensure quality at $-25{\sim}40^{\circ}C$. So, LED navigation light should ensure a problems of random failure or long time operation. In this paper, we present the current status and future plans of reliability so far.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.541-546
• /
• 2014

Korea Expressway Corporation established standard of LED lighting fixture in Dec. 2013. To raise compatibility, the standard requires a fixed form and it is applied to street lights and tunnel lights, etc. Because streetlight has different circumstance condition from tunnel light that is down light and exposed to constant wind velocity over height of 8 meters, in case of LED module which has the same shape, characteristic of radiant heat can be different. In this paper, we designed 25 [W] LED Module that is designated by standard of Korea Expressway Corporation and analyzed characteristics of radiant heat about natural convection and forced convection. It is dropped 10.12[$^{\circ}C$] that max temperature is decreased by increasing 20 mm of bended height of heatsink at the condition of natural convection. Radiant heat characteristic of bended height 35 mm became 78.08[$^{\circ}C$] at the condition of natural convection, 55.30[$^{\circ}C$] at the condition of forced convection so that 22.78[$^{\circ}C$] is decreased that is 29.1[%] decrease. Bended height 55mm became 67.96[$^{\circ}C$] at the condition of natural convection, 48.04[$^{\circ}C$] at the condition of forced convection so that 19.92[$^{\circ}C$] is decreased that is 29.3% decrease.