• Korean Journal of Health Education and Promotion
• /
• v.32 no.3
• /
• pp.97-107
• /
• 2015

Objectives: The current study aims to examine whether the influence of National Long-term Care Insurance(NLCI) on the quality of life(QoL) trajectory of older adults with disabilities is more positive than its influence on those without disabilities. Methods: Sample consisted of 5,362 elderly aged 65 and over who participated in the Korean Welfare Panel Study from Wave1 to Wave7. Data were analyzed using latent growth curve modeling. Results: Major findings are as follows. (1) Before the NLCI, the trajectories of QoL between older adults with disabilities and those without were same. (2) After the NLCI, elders with disabilities showed lower levels of QoL at the beginning, but the gaps gradually decreased with time. These results indicate that the implementation of NLCI more positively affected elders with disabilities than those without disabilities. Conclusions: These results suggest that the NLCI functions properly as one of social security nets to cope with the needs of older adults with disabilities. In conclusion, it is critical to develop a sustainable NLCI system to enhance the QoL of older adults with disabilities.

• Journal of the Chungcheong Mathematical Society
• /
• v.26 no.2
• /
• pp.393-402
• /
• 2013

For 0 < $p$ < ${\infty}$, ${\alpha}$ > -1 and 0 < $r$ < 1, we show that if $f$ is in the space of Dirichlet type $\mathfrak{D}^p_{p-1}$, then ${\int}_{1}^{0}M_{p}^{p}(r,f^{\prime})(1-r)^{p-1}rdr$ < ${\infty}$ and ${\int}_{1}^{0}M_{(2+{\alpha})p}^{(2+{\alpha})p}(r,f^{\prime})(1-r)^{(2+{\alpha})p+{\alpha}}rdr$ < ${\infty}$ where $M_p(r,f)=\[\frac{1}{2{\pi}}{\int}_{0}^{2{\pi}}{\mid}f(re^{it}){\mid}^pdt\]^{1/p}$. For 1 < $p$ < $q$ < ${\infty}$ and ${\alpha}+1$ < $p$, we show that if there exists some positive constant $c$ such that ${\parallel}f{\parallel}_{L^{q(d{\mu})}}{\leq}c{\parallel}f{\parallel}_{\mathfrak{D}^p_{\alpha}}$ for all $f{\in}\mathfrak{D}^p_{\alpha}$, then ${\parallel}f{\parallel}_{L^{q(d{\mu})}}{\leq}c{\parallel}f{\parallel}_{\mathcal{B}_p(q)}$ where $\mathcal{B}_p(q)$ is the weighted Besov space. We also find the condition of measure ${\mu}$ such that ${\sup}_{a{\in}D}{\int}_D(k_a(z)(1-{\mid}a{\mid}^2)^{(p-a-1)})^{q/p}d{\mu}(z)$ < ${\infty}$.

• Journal of information and communication convergence engineering
• /
• v.4 no.4
• /
• pp.147-150
• /
• 2006

The thin film of PbTiO3 is fabricated at substrate temperature of 100-150$^{\circ}C$. The infrared spectrum of the ferroelectric thin film is measured as temperature of thermal treatment, 400 - 550$^{\circ}C$. According to infrared spectrum analysis, there are absorption bands at a nearby wave number of 1000 $\sim$ 400 cm-l and the thin film treated by temperature of 550$^{\circ}C$ has absorption bands of wave number 500 cm-l similar to infrared response property of PbTiO3 powder. The pyroelectric infrared detector is fabricated after deposition of Pt and PbTiO3 thin film on Si wafer by sputtering machine. The measured remnant polarization are 11.5-12.5$\muC/cm2$, breakdown electric field Ec is 100-120KV/cm, and voltage responsivity and detectivity is -280V/W, -108cm Hz/W.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.335-338
• /
• 2006

This report introduces a National Vessel Monitoring System(NVMS) within the General Information Center On Maritime Safety and Security(GICOMS) project and a national legislation system for ship's safety management in Korea. We also represent future directions of NVMS in terms of E-Navigation(E-Nav), which is the new study item for COMSAR and NAV that has been adopted from the Maritime Safety Committee(MSC) 81st session. It concludes the future E-Nav system, when it is built, that all functions of NVMS should be used by NVMS controllers as well as mariners, and we should also consider the existing NVMS infrastructure including S/W and H/W.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.562-571
• /
• 2021

In this work, we propose a new mechanistic model for the treatment of helium behaviour which includes the description of helium solubility in oxide fuel. The proposed model has been implemented in SCIANTIX and validated against annealing helium release experiments performed on small doped fuel samples. The overall agreement of the new model with the experimental data is satisfactory, and given the mechanistic formulation of the proposed model, it can be continuously and easily improved by directly including additional phenomena as related experimental data become available.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.31-39
• /
• 2002

The VPN(Virtual Private Network) is a private network constructed logically on a public network infrastructure. There have been numerous studies to support the VPN services by using different technologies such as IP in IP, GRE, L2TP, MPLS and so on. Among these technologies, MPLS has shown many merits in aspects of QoS, security, and management, compared with other technologies. As an enhancement of the VPN that is controlled by MPLS PE(Provider Edge) routers, this paper presents the VPN controlled by MPLS CE(Customer Edge) routers. The functional architecture of the CE based VPN and operations of the CE routers are described along with the performance comparison of CE based MPLS VPN. It has been shown that the CE based VPN has more advantages than PE based VPN with respect to independency, scalability, security, and complexity.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.6
• /
• pp.1081-1090
• /
• 2022

The face recognition model is used for identity recognition of smartphones, providing convenience to many users. As a result, the security review of the DNN model is becoming important, with adversarial attacks present as a well-known vulnerability of the DNN model. Adversarial attacks have evolved to decision-based attack techniques that use only the recognition results of deep learning models to perform attacks. However, existing decision-based attack technique[14] have a problem that requires a large number of queries when generating adversarial examples. In particular, it takes a large number of queries to approximate the gradient. Therefore, in this paper, we propose a method of generating adversarial examples using orthogonal space sampling and dimensionality reduction sampling to avoid wasting queries that are consumed to approximate the gradient of existing decision-based attack technique[14]. Experiments show that our method can reduce the perturbation size of adversarial examples by about 2.4 compared to existing attack technique[14] and increase the attack success rate by 14% compared to existing attack technique[14]. Experimental results demonstrate that the adversarial example generation method proposed in this paper has superior attack performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.363-370
• /
• 2021

The perimeter intrusion detection system is very important in physical security. In this study, a micro smart device (module) using MEMS sensor was developed in IoT environment for external intrusion detection. The outer intrusion detection system applying the smart device developed in this study is installed in various installation environments, such as barbed wire of various materials and shapes, the city center, the beach, and the mountain, so that it can detect external intrusion and its location as well as false alarms. As a smart sensor that can minimize the false alarm rate and economical construction cost, it is expected that it can be used for the safe operation of major facilities and prevention of disasters and crimes.

• International Journal of Computer Science & Network Security
• /
• v.23 no.2
• /
• pp.193-198
• /
• 2023

The article focuses on the areas of education activities in using techniques for teaching and learning with information and communication technologies (ICTs), researching and analyzing the available ICTs, gearing the technologies to the specific psychological and pedagogical conditions, independently building and modeling ICTs, enlarging and developing their use in the learning environment. The visualization of scientific research has been determined to be part of the educational support for building students' ICT competence during teaching and learning and is essential to the methodology culture. There have been specified main tasks for pedagogy technologies (PTs) to develop the skills of adaptability to the global digital space in students, their effective database operation and using the data bases as necessary elements for learning and as part of professional training for research. We provided rationalization for implementing the latest ICTs into the Ukrainian universities' curricula, as well as creating modern methods for using the technologies in the learning / teaching process and scientific activities.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3367-3378
• /
• 2021

The design phase and safety assessment of Generation IV liquid metal-cooled fast reactors calls for the improvement of fuel pin performance codes, in particular the enhancement of their predictive capabilities towards uranium-plutonium mixed oxide fuels and stainless-steel cladding under irradiation in fast reactor environments. To this end, the current capabilities of fuel performance codes must be critically assessed against experimental data from available irradiation experiments. This work is devoted to the assessment of three European fuel performance codes, namely GERMINAL, MACROS and TRANSURANUS, against the irradiation of two fuel pins selected from the SUPERFACT-1 experimental campaign. The pins are characterized by a low enrichment (~ 2 wt.%) of minor actinides (neptunium and americium) in the fuel, and by plutonium content and cladding material in line with design choices envisaged for liquid metal-cooled Generation IV reactor fuels. The predictions of the codes are compared to several experimental measurements, allowing the identification of the current code capabilities in predicting fuel restructuring, cladding deformation, redistribution of actinides and volatile fission products. The integral assessment against experimental data is complemented by a code-to-code benchmark focused on the evolution of quantities of engineering interest over time. The benchmark analysis points out the differences in the code predictions of fuel central temperature, fuel-cladding gap width, cladding outer radius, pin internal pressure and fission gas release and suggests potential modelling development paths towards an improved description of the fuel pin behaviour in fast reactor irradiation conditions.