This study investigated the characteristics of wood tar, produced as a byproduct during the production of charcoal using oak wood by the modified traditional kiln and mechanical steel kiln. The wood tar was analyzed with a number of techniques, including Py-GC/MS, NMR, MALDI-TOF, FT-IR, TG and DSC. The Py-GC/MS analysis indicated that modified traditional kiln generated a higher hydrocarbon ratio in the wood tar than that of mechanical steel kiln. On the other hand, mechanical steel kiln resulted in a higher proportion of phenolic and aromatic hydrocarbon components than that of modified traditional kiln. Those results were also confirmed by NMR analysis. The MALDI-TOF analysis suggested that the wood tar produced in the mechanical steel kiln had a slightly higher molecular weight than the wood tar produced in the modified traditional kiln. In addition, the FT-IR analysis showed characteristic peak of symmetrical stretching vibration of $CH_3$ from the modified traditional kiln while characteristic peaks of the C-C and C-O stretching vibration were observed from the mechanical steel kiln. Moreover, TG and DSC analysis suggested that the mechanical steel kiln is more thermally stable than that of modified traditional kiln. Those findings clearly showed that the method of making charcoal greatly affects the properties of wood tar.
Kwon, Gu Joong;Kim, Ah Ran;Lee, Hee Soo;Lee, Seung Hwan;Hidayat, Wahyu;Febrianto, Fauzi;Kim, Nam Hun
Journal of the Korean Wood Science and Technology
/
v.46
no.5
/
pp.527-540
/
2018
In this study, the characteristics of the white charcoal from charcoal kilns made for both charcoal production and thermotherapy and from the traditional charcoal kiln were compared and examined. A charcoal kiln for thermotherapy as a secondary purpose was made to minimize environmental problems such as fine dust and harmful gas generated from sealed charcoal kiln in consideration of comfort and safety. White Charcoal produced from the charcoal kiln for both charcoal production and thermotherapy had higher ash and volatile matter and lower fixed carbon than that from the traditional charcoal kiln. The density of the white charcoal produced from the charcoal kiln for both charcoal production and thermotherapy was slightly higher than that of the traditional one, but the equilibrium moisture content and pH were not significantly different. The calorific value, refinement degree, hardness and anatomical structure were not different between the two. It was concluded that the white charcoal produced from the advanced charcoal kiln for thermotherapy as a secondary purpose meets the quality certification standards of Korea Forest Research Institute.
An, Ki Sun;Kwak, Lee Ku;Kim, Hong Gun;Ryu, Seung Kon
Korean Chemical Engineering Research
/
v.60
no.2
/
pp.208-216
/
2022
Surface morphology and adsorption characteristics of black and white charcoals prepared from Korean traditional kiln were quantitatively analyzed. TGA and elemental analysis of charcoals were different from produced kiln, and thermal degradation temperature and carbon content of white charcoals were apparently higher than those of black charcoals. Surface morphology shows the activation progressed through the longitudinal direction of woods and new micropores were developed to radial direction on the surface of macropores as the furthermore activation resulting in the pore connection. BET adsorption isotherms show that there are low-pressure hysteresis due to the no desorption of adsorbates, which resulted in unique Type of charcoals overlapping Type I and Type IV. Such a low-pressure hysteresis is occurred from expansion of adsorbates, which were embedded in the micropore entrances and did not get out during the desorption run. The characteristics of charcoals such as specific surface area and pore size distribution did not show correct values depending on not only produced company but also sampling sites of one piece of charcoal. Therefore, it is not easy to suggest the quantitative characteristics of charcoals prepared from Korean traditional kiln. On the other hand, preparation the quality standard of charcoal is necessary for their special uses such as adsorbent.
Journal of the Korean Society of Food Science and Nutrition
/
v.31
no.2
/
pp.251-256
/
2002
Fresh bamboo (Phyllostachys bambuoides sieb. et zucc.) was charred at the mechanical steel kiln and traditional earth kiln with subsequent condensation of its smoke to 10$0^{\circ}C$. It was settled down for 12 months to remove tar components and then the middle layer of the liquid was collected as a bamboo smoke distillates to analyze its chemical composition and physicochemical characteristics for use as food additives or processing aids. The gravity, transmittance, reflectivity, and viscosity were 1.008, 89.05%, 1.36%, and 12.48 cp in the bamboo smoke distillates processed by mechanical steel kiln (MBSD) and 1.012, 98.33%, 1.34% and 9.05 cp in the bamboo smoke distillates by traditional earth kiln (TBSD), respectively. The color of TSBD was brighter than that of MBSD. The pH and titratable acidity, tar and remains were 3.55 and 2.830%, 2.803% and 0.671%, respectively, in the MBSD and 2.93 and 3.470%, 0.051% and 0.004%, respectively, in the TBSD. The major phenolic compounds of bamboo smoke distillates (BSD) were phenol, Ο-cresol, p-cresol, and guaiacol and the major organic acids were acetic acid, propionic acid, iso-butyric acid, and n-butyric acid, and major alcohols were methanol, furfuryl alcohol, and maltol. The contents of phenolic compound and alcohol were more in MBSD than in TBSD whereas the content of organic acid was more in TBSD than in MBSD. Therefore, toxic compounds for the human body, such as methanol from BSD should be removed for use as a food ingredient in the future.
Fresh bamboo was charred in the mechanical steel kiln and traditional earth kiln, and then its smoke was condensed to produce bamboo smoke distillates (BSD). BSD made by mechanical steel kiln (MBSD) was purified by distillation. There is significant difference (p<0.05) in total phenol content among them, 663.40 ppm in MBSD, 571.62 ppm in PMBSD, and 485.16 ppm in TBSD. The nitrite scavenging activity and electron donation ability of BSDs were measured and the content of total phenol content was determined. The nitrite scavenging activity of BSD increased with increasing concentration of BSD at the same pH and decreased with increasing pH. There is significant difference (p<0.05) in nitrite scavenging activity among MBSD, purified MBSD (PMBSD), and BSD made by traditional earth kiln (TBSD) and the activity was the highest in MBSD and the lowest in TBSD. The electron donationg ability of BSDs increased with increasing the concentration of BSD and the reaction time. There is significant difference in the electron donation ability of BSDs at the same period and different concentration among the BSDs, the highest in MBSD and the lowest in TBSD.
Journal of Physiology & Pathology in Korean Medicine
/
v.21
no.5
/
pp.1250-1259
/
2007
Bambusae Caulis in Liquamen(BCL) has been commonly prescribed for stroke patients in the traditional Oriental medicine. So this study is aims to investigate the anti-apoptotic and neuroprotective effects of Bambusae Caulis in Liquamen(BCL) manufactured by different production process on the focal ischemia induced by intraluminal filament insertion in rats. The focal ischemia was induced by intraluminal filament insertion into middle cerebral artery. The animals were divided into four groups (n=15 in each group). The ischemia induced and not treated group : Control group, the ischemia induced and oral medication of the three kinds of BCL : BCL-A group, BCL-B group, BCL-C group. BCL-A was produced by heating at a low temperature$(250^{\circ} C)$ in electric kiln and filtering. BCL-B was produced by heating at a high temperature$(900^{\circ} C{\sim}1,000^{\circ}C)$ in yellow earth kiln and refining and filtering. BCL-C was produced by heating at a low temperature$(400^{\circ} C)$ yellow earth kiln and no refining and filtering. The anti-apoptotic and neuroprotective effects of the oral medication of BCL were observed by Bax, BCL-2, cytochrome c, mGluR5, cresyl violet and ChAT-stain. Our study suggests that BCl-A(was produced by heating at a low temperature in electric kiln and filtering) and BCL-C(was produced by heating at a low temperature in yellow earth kiln and no refining and filtering) show anti-apoptotic and neuroprotective effects on the focal ischemia induced by intraluminal filament insertion in rats and BCL-C is more effective than BCL-A.
The first twenty-five years of scientific study within Korea on Korean traditional ceramics has been characterized as a bridging effort to understand the rich field of artistic ceramic masterpieces on one hand with analytic results gained from mounds of broken shards and kiln wastes on the other. First shard pieces were collected directly from the waste mounds, but most of the analyzed shards were provided by art historians and museum staffs directly involved in systematic excavations. The scientific study is viewed as one of many complimentary ways in learning about the multi-faceted ceramics culture, ultimately connecting human spirits and endeavors from the past to the present to the future. About 1350 pieces of analyzed shards have been so far collected and organized according to the production location and time period. From the experimental results of the analysis, the compositional and microstructural characteristics of bodies and glazes have been deduced for many kiln sites of Goryeo and Joseon dynasties. Except for a few local kilns, porcelain stone was used as body material in both dynasties. The principle of mixing a clay component with a flux material was used in Korean glazes as was in China. The clay component different from body clay was often used early on. In Gangjin a porcelain material appropriate for whiteware body was mixed for celadon glaze, and in Joseon Gwangju kilns glaze stone was chief clay material. The use of wood ash persisted in Korea even in making buncheong glazes, but in Joseon whitewares burnt lime and eventually crushed lime were used as flux material.
This study investigated the characteristics of and changes in hemp textile production practices at Gurye in Jeollanam-do in modern times. To do this, in this study, both a literature review and fieldwork research were utilized as research methods. The literature review focused on Gurye's hemp data, and the fieldwork research involved two separate trials. Male and Female residents of Gurye who had experience in the area of hemp production from the 1920s to the 1980s participated in this study. The results were as follows. First, regarding hemp fiber cultivation in Gurye, hemp cultivation continued to the 1970s and there were no changes in hemp cultivation practices during the Japanese colonial-era. Second, there have been very important changes in hemp kilns over time. In the 1950s, there were both single-body kilns and separate-body kilns in Gurye. Later, specifically in the 1950s, a new type of kiln using an iron pot appeared, and the most modern kilns were concrete structures. Third, in Gurye, women cooperatively removed hemp husks immediately after stemming, subsequently bleaching the hemp by soaking it in lye or caustic soda. Over time, there have been changes in ash types and in soaking periods. Fourth, loom types changed from the traditional Korean back-strap loom to the treadle loom in the 1930s- to 1940s. Fifth, since the 1970s, the hemp textile output levels of Gurye have been reduced due to the westernization of clothing styles, the inflow of Chinese hemp fiber and government regulations pertaining to hemp cultivation.
Herein, a case study discussing the effect of carbonaceous aerosol pollution, which is emitted during the charcoal kiln manufacturing processes or carbonization processes, on the atmospheric environment is presented . In South Korea, in situ analysis of different charcoal production plants specialized in the production of charcoal sauna indicate that the emitted organic carbon (OC) and elemental carbon (EC) aerosols are significantly influenced by the nature of the biomass and technological processes, i.e., treatment or emissions abatement systems for the exhaust effluent gases. In detail, total carbon (TC), which is calculated as the sum of OC and EC emission factors, varied widely from a charcoal production site to another ranging from 21.8 to 35.8 gTC/kg-oak, where the mean value for the considered production sites was approximately 28 gTC/kg-oak (N = 7 and sum = 196.4). Results indicate that the emission factors from a modern charcoal production process in South Korea are quantitatively lower in comparison with the traditional kiln. This study aims to propose advanced wood processes for the production of charcoal from the viewpoint of environmental protection policy and green engineering.
Kim, Dong-Eun;Jung, Jin-Ho;Lee, Sung-Min;Kim, Hyung-Tae
Journal of Powder Materials
/
v.13
no.6
s.59
/
pp.455-461
/
2006
High temperature dielectric constants of the various ceramic materials have been measured using cavity perturbation method. The measurements were applied to refractory, traditional and fine ceramic powder compacts from room temperature to $1200^{\circ}C$. Calibration constant in the equation suggested by Hutcheon et al., was determined from the dielectric constants of reference specimen (teflon and alumina) at room temperature. From these results, informations on the refectory materials were obtained for the microwave kiln design and understanding of the microwave heating effects of ceramics have been improved.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.