• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.630-647
• /
• 2021

We determined the current problem of the restoration deposit-estimation system, stipulated by the Mountainous Districts Management Act, using the Delphi technique. Consequently, we proposed a standard model for forest land restoration to derive a reasonable deposit-estimation system. With the result of the Delphi survey, the inappropriateness of land-use type and slope gradient classifications was shown; the insufficiency of standard works was a significant problem in the current system. A way to solve these problems was devised, to reorganize the current land-use type into the subject of the site. The specific subjects included the following: (i) to permit or report forest land-use change and temporary use of forest land, (ii) to report temporary use of forest land, (iii) to permit stone collection or sale for mineral mining, and (iv) to allow sediment collection. The current slope gradient subdivision into (a) θ<10°, (b) 10°≦θ<15°, (c) 15°≦θ<20°, (d) 20°≦θ<25°, (e) 25°≦θ<30°, and (f) θ≧30° and the reorganization of 17 standard works into 22 standard works were deemed as solutions, along with seven additional works. We developed 24 standard models for the forest land restoration project based on the aforementioned results. The deposits estimated by these models ranged from 34,185,000 (Korean) won to 607,403,000 won. If additional works, premiums, discounts, and supervision fees are added to the models, the deposit increases to an estimated 668,143,000 won subject to permission for stone collection or sale and mineral mining. Experts agree on the distribution of the restoration deposits estimated by these models at a high level in the Delphi survey. Our findings are expected to contribute to securing the appropriateness of the restoration cost deposited for the smooth performance of the vicariously executed restoration project.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.152-158
• /
• 2019

This study was conducted to develop and prove the effects of an agronomical pest control measure on ginseng cultivated by direct seeding in paddy field, and the results obtained are as follows. Decomposition of ginseng in field during overwintering was due to gray mold rot caused by Botrytis cinerea, which occurred in October or November of 2016 and intensified in February and March the following year. The occurrence rate of gray mold rot based on shading materials was 6.5%, 16.8%, and 29.5% with light-proof paper, PE shade net, and rice straw shade, respectively. The initial infection occurred in the leaves prior to wintering and secondary infection occurred in the stems after wintering. The rate of screrotium formation by gray mold in the above-ground parts of ginseng tended to increase: 26.6% on October 20, 33.7% in November 20, and 41.8% on December 20. The force needed to remove the leaves and stems from withered ginseng was 0.2, 0.94, 2.5, and 5 kg for 1-, 2-, 3-, and 4- and 5-year holds; the force required was 1 kg after wintering, making it relatively easy to remove. The disease incidence rate after the removal of leaves and stems was 2.5%, 1.2%, and 2.2% in 4-, 5-, and 6-year-old plants, respectively, and a disease high incidence rate of 8.8%, 13.0%, and 18.2%, respectively, was seen when the leaves and stems were not removed. In both transplanting and direct seeding, the miss-planted rate decreased and the germination rate increased when shading material was removed and the surface of ridge was covered with soil or vinyl.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.281-286
• /
• 2015

This study was carried out to investigate the effects of cultural systems on growth, vitamin C, amino acid content, and yield of Peucedanum japonicum grown in artificial light plant factory. Treatments were given with Nutrient Film Technique (NFT), Medium (Perlite), and Aeroponics. Plant height was the highest in NFT system as 10.2cm, and was the shortest in Perlite as 8.9cm. Fresh leaf weight was the high in order of Perlite, NFT, and Aeroponics. Total phenolic compounds was different from cultural systems in order of Aeroponics as $117.84mg{\cdot}100g^{-1}\;GE$, NFT as $98.57mg{\cdot}100g^{-1}\;GE$ and Perlite as $74.62mg{\cdot}100g^{-1}\;GE$. Total flavonoid content of Aeroponics is $0.12mg{\cdot}100g^{-1}$ but that of NFT and Perlite treatments is not detected. Vitamin C content in Aeroponics as $108.23mg{\cdot}100g^{-1}$ was significant different from Perlite as $88.05mg{\cdot}100g^{-1}$ as and NFT $80.83mg{\cdot}100g^{-1}$. Total dietary fiber content was higher Aeroponics than Perlite and NFT. Cystein content was the highest in Aeroponics as $46.76mg{\cdot}100g^{-1}$ and methione content was the lowest in Perlite as $75.64mg{\cdot}100g^{-1}$. Mineral content of leaves was high in order of K, Ca, P and Mg in all treatments.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.207-215
• /
• 2019

This study was conducted to establish spring sowing techniques in preparation for the impacts of climate change on sowing time and wintering rates of winter forage crops such as barley, oat and IRG. Oat showed the highest yield in 2017 which had relatively dry climate condition. And when sowing in late Febrnary 2017 yielding 9,408kg/ha were obtained, yielding 4,011kg/ha more than IRG's sown in the same period. In 2018 which had relatively wet climate condition, four barley species decreased in the production from the previous year. Oat also had decreased by 70% from 9,408kg/ha to 2,851kg/ha. On the other hand, IRG maintained the production in the mid-5,000kg/ha range. It was also found that IRG had the least variability due to external influences regardless of seeding period for 2 years. Mixed sowing with IRG and oat in 50:50 ratio was the highest dry matter, 6,584kg/ha, and IRG was 18.5% and Oat was 2.3 times higher than single planting.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.16-23
• /
• 2016

This study was carried out to investigate the effects of artificial light sources on growth and yield of hydroponically grown Peucedanum japonicum in plant factory. Treatments were composed with; florescent lamp(FL) as control, and LED lights; R:B(2:1, RB), R:B:W(2:1:3, RBW), and R:B:G:W(2:1:0.5:3, RBGW). Plant height of RBGW and FL treatments were superior to RB and RBW. Leaf weight of RBW and RB were superior to FL and RBGW. There were no significant difference of leaf length and thickness among the treatments. Lightness of leaves was same tendency with plant height. Total phenolic compound content was the high in order of RB as $105.77mg{\cdot}100g^{-1}$ GE, RBW as $92.52mg{\cdot}100g^{-1}$ GE, FL as $89.08mg{\cdot}100g^{-1}$ GE, and RBGW $82.00mg{\cdot}100g^{-1}$ GE. Total flavonoids were not detected in all treatments. Vitamin C content was the highest in RB and the lowest in FL. Total dietary fiber were the highest in FL and the lowest in RBGW. There was no significant difference cystein and methionine contents among the treatments. Concludely, yield, total phenolic compounds, and vitamin C content was high in RBW and RB. We reached conclusion that RBW is best artificial light source considering yield, functionality and eye fatigability when work. We recommend to further study LED pulse and duty rates for increasing functionality.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.327-337
• /
• 2022

Ecological restoration is considered a good means to prevent biodiversity loss in terms of the ecosystem's health and sustainability. However, there are difficulties in putting it into practice as there is no comprehensive and objective standard for the selection of plant species, such as environmental, ecological factors, and restoration goal setting. Therefore, this study developed an evaluation index necessary for selecting plant species for restoration using the Delphi method that synthesizes the opinions of the expert group. A survey with 38 questionnaires was conducted twice for experts in ecological restoration, etc., and the importance and priority of evaluation indicators were analyzed by dividing the restoration targets into inland and island regions. The result of the importance analysis showed that "native plants" had the highest average of 4.9 among the evaluation indices in both inland and island regions, followed by "seed security", "propagation", and "root growth rate". In the inland region, the index priority was analyzed in the order of "native plants", "appearance frequency", "root growth rate", "distribution range", and "seed security" in the island region, it was analyzed in the order of "native plants", "root growth rate", "appearance frequency", "distribution range", and "tolerance", showing slight differences between the two indicators. As a result of the importance and priority indicator analysis, we set the mean importance and priority of 4.1 and 2.9, respectively, in the inland region and 4.2 and 2.9, respectively, in the island region. As for the criteria of selecting plant species for ecological restoration, the "native plants" had the highest importance and priority. "Seed securing", 'viability", "topography", "proliferation", "tolerance", "soil conditions", "growth characteristics", "early succession", "distribution range", "appearance frequency", and "germination rate" were classified into subgroups of low importance and priority. The lowest indicators were "final stage of succession", "transition period", 'transition stage", "root", "reproduction", "soil", "appearance", "technology", "landscape", "climate", and "germination rate". We expected that the findings through objective verification in this study would be used as evaluation indicators for selecting native plant species for ecological restoration.

• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.525-537
• /
• 2018

The Korean coast is divided into the West Korea Coastal zone (WKC), the South Coastal zone of Korea (SCK), the East Korea Coastal zone (EKC), and Jeju Coastal zone of Korea (JCK). Each coastal zone has different marine environment characteristics. This study analyzed zooplankton data of KOEM (Korea Environment Management Corporation) collected in the Korean coastal waters the spring and summer of 2015 and 2016. In spring, water temperature was lowest in the JCK, and gradually increased in the order of EKC, SCK, and WKC, while in summer lowest in WKC and increased in the order of EKC, SCK, and JCK. Salinity was lowest in WKC which had many rivers flowing inland, and increased in the order of SCK, EKC and JCK in spring. In summer it was lowest in JCK and increased toward WKC, SCK, and EKC. In summer, Chlorophyll-a concentrations were generally low, but was lowest in JCK in spring. In the study area, a total of 77 species occurred, of which 50 species did in spring and 65 species in summer. The number of species was lowest in JCK and highest in SCK in spring and summer, respectively. Paracalanus parvus s. l. was the most dominant species or the second dominant species in Korean coastal areas in spring, but it was predominant in summer. In addition, in spring Acartia hongi, Calanus sinicus, Oithona similis were predominant in WKC, Oithona similis and Corycaeus affinis in SCK, O. similis and Corycaeus sp. in EKC, C. affinis and O. setigera in JCK. In summer Corycaeus spp., O. similis, A. hongi, Tortanus forcipatus were predominant in WKC, C. affinis, Pseudodiaptomus marinus in SCK, O. similis, A. omorii, Corycaeus sp. in EKC, and A. steueri, A. pacifica, Oithona sp., C. sinicus in JCK. The copepod community in the Korean coastal areas were classified into four areas, WKC-western SCK, eastern SCK, EKC and JCK according to differences in environmental factors such as water temperature, salinity, Chl-a concentration, and suspended matter concentration of each coastal area.

• Korean Journal of Plant Resources
• /
• v.25 no.4
• /
• pp.387-393
• /
• 2012

In order to improve storability of subtropical yam produced in South Korea, the major pathogens found during the storage were isolated and identified of the pathogenicity, and rot inhibition effect was studied based on the curing treatment condition. Penicillium sclerotigenum and Penicillium polonicum were identified as major pathogens causing rot in subtropical yam during storage, and P. sclerotigenum had stronger pathogenicity. Only the cut surface which has been made during a harvest and has been made smooth before curing generated a normal callus layer. The cut surface of tuberous root was cured in 95% of relativity humidity for three days at $23^{\circ}C$, and cured at $28^{\circ}C$ and $33^{\circ}C$. The observation of callus layer showed that the $23^{\circ}C$ treatment group had similar color saturation between tuberous root and pellicle, while the groups treated above $28^{\circ}C$ showed clear distinction. The generation rate of callus 0.5mm or bigger was 93 percent at $28^{\circ}C$ treatment, 96% at $33^{\circ}C$ treatment, but was 52% at $23^{\circ}C$ treatment. The conventional curing treatment group that used wind or sunlight at room temperature created little callus layer. The infection rate of pathogens according to the relative humidity inside the storage room was low at 40% and 60% of humidity, and the curing treatment period did not make a difference. When the humidity inside the storage room was 80%, all treatment groups rapidly increased the fungal pathogens. The rotten rate of each treatment was studied after 180 days during which the storage temperature was maintained at $16^{\circ}C$ and relative humidity 60%. While the rotten rate of tuberous root that has been cut in conventional curing treatment based on solar and wind was 43%, the one cured at over $28^{\circ}C$ and created the callus layer was less than 18%. While even a healthy tuberous root showed 25% of rotten rate in the traditional treatment group, the one cured at over $28^{\circ}C$ was less than 10%. The weight loss was 1-6% lower in the forced treatment group than in the conventional treatment group.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.161-170
• /
• 2020

There is systematic spatial variations in environmental properties due to sensitive reaction to external conditions at plastic greenhouse occupied 99.2% of domestic agricultural facilities. In order to construct 3 dimensional distribution of temperature, relative humidity, CO₂ and illuminance, measurement matrix as 3 by 3 by 5 in direction of width, height and length, respectively, dividing indoor space of greenhouse was designed and tested at experimental site. Linear regression analysis was conducted to evaluate optimal estimation method in terms with horizontal and vertical variations. Even though sole measurement point for temperature and relative humidity could be feasible to assess indoor condition, multiple measurement matrix is inevitably required to improve spatial precision at certain time domain such as period of sunrise and sunset. In case with CO₂, multiple measurement matrix could not successfully improve the spatial predictability during a whole experimental period. In case with illuminance, prediction performance was getting smaller after a time period of sunrise due to systematic interference such as indoor structure. Thus, multiple sensing methodology was proposed in direction of length at higher height than growing bed, which could compensate estimation error in spatial domain. Appropriate measurement matrix could be constructed considering the transition of stability in indoor environmental properties due to external variations. As a result, optimal measurement matrix should be carefully designed considering flexibility of construction relevant with the type of property, indoor structure, the purpose of crop and the period of growth. For an instance, partial cooling and heating system to save a consumption of energy supplement could be successfully accomplished by the deployment of multiple measurement matrix.

• Journal of Embryo Transfer
• /
• v.29 no.1
• /
• pp.73-81
• /
• 2014

The in vitro production of porcine embryos was essential to increase of blastocyst development rate and select of high quality blastocyst in early stage. There were a lot of reports about in vitro porcine embryo development, but there was no report about the selection of high quality embryos. Therefore, in this study, we investigated the effect of vitamin $K_1$ (vit $K_1$) on the development and survival rate of porcine in vitro fertilized embryos. When vit $K_1$ was treated for 24 hr at day 1 in vitro culture, blastocyst development rate in the control group ($35.5{\pm}3.2%$) was significantly lower compared to $1.0{\mu}M$, $3.0{\mu}M$, or $6.0{\mu}M$ groups ($14.5{\pm}4.3$, 0.0, or 0.0%; p<0.05). The survival rates of blastocysts at day 8 in $1.0{\mu}M$, $3.0{\mu}M$ or $6.0{\mu}M$ of vit $K_1$ treated groups ($22.2{\pm}2.9$, 0.0 or 0.0%) were significantly lower than that of the control group ($31.8{\pm}2.6%$; p<0.05). We were added at $1.0{\mu}M$, $3.0{\mu}M$ or $6.0{\mu}M$ vit $K_1$ for different durations of time at day 1 in vitro culture. The development rate and survival rate in the group of $1.0{\mu}M$ vit $K_1$ for 6 hr was $26.5{\pm}2.9%$ and $47.2{\pm}2.8%$, respectively, which were differed significantly in the group of 12 hr (p<0.05). In the group of $3.0{\mu}M$ vit $K_1$, the blastocyst development in control group was $36.4{\pm}3.1%$ but, the survival rate $41.7{\pm}3.2%$ in the group of 3.0 hr was significantly higher than that of the control group (p<0.05). In the group of $6.0{\mu}M$ vit $K_1$, the control group's the blastocyst development was $32.0{\pm}2.8%$ and the 0.5 hr supplement group's survival rates was $42.9{\pm}1.8%$ higher than other groups. We added vit $K_1$ at day 1, day 2, day 4 and day 6 of in vitro culture, on the based the results of supplemented concentration and duration. In the group of $1.0{\mu}M$ 6.0 hr addition, the blastocyst development rate of day 4 and the survival rate of day 2 were the highest in each group. In the groups of $3.0{\mu}M$ 3.0 hr addition or $6.0{\mu}M$ 0.5 hr addition, the blastocyst development ($59.5{\pm}4.1%$ and $50.0{\pm}3.6%$) and survival rates ($72.7{\pm}5.4%$ and $79.2{\pm}4.0%$) on day 4 were significantly higher than that of control and other experiment groups (p<0.05). Meanwhile, the number of cells in blastocysts that produced by vit $K_1$ supplementation was $53.4{\pm}5.8$, $49.4{\pm}3.8$ and $51.5{\pm}4.5$ respectively, which were significantly higher than that of $40.2{\pm}2.3$ in the control group (p<0.05). There was no difference of the number of apoptotic cells between control and experiment groups. In addition, gene expression of survival blastocyst, the Bax mRNA expression was similar between the control and the experiment groups. However, Bcl-xL mRNA expression's in the group of $6.0{\mu}M$ 0.5 hr on day 4 was highest among control and experiment groups (p<0.05). In this study suggested that the control of concentration, duration and time was effective on the survival and cell number of porcine blastocyst derived from in vitro. We are not know what the exact reasons of the effect of vit $K_1$ on embryo development and need to fur ther study. However, vit $K_1$ might be using the selection of high quality porcine blastocyst.