• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.508-513
• /
• 2011

Hemp is known as one of the most productive and useful plants, which grows quickly in a moderate climate with only moderate water and fertilizer. Traditionally in Korea, hemp bast is used to natural fibres, and remaining such as stem and root is treated as waste. Those of hemp by-products can be transformed to bio fuel such as bio-oil and activated carbon. To understand pyrolysis characteristics, thermogravimetric analysis were carried out in TGA, in which hemp by-products were mostly decomposed at the temperature range of $270{\sim}370^{\circ}C$. The corresponding kinetic parameters including activation energy and pre-exponential factor were determined by differential method over the degree of conversions. The values of activation energies for pyrolysis were increased as the conversion increased from 10 to 90%.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.260-267
• /
• 2021

In this study, a carboxylate-based anionic surfactant SLEC-3 was prepared from coconut oil and the structure was elucidated by using FT-IR, ¹H-NMR and ¹³C-NMR analysis. Measurements of interfacial properties such as critical micelle concentration, static and dynamic surface tensions, emulsification index, and foam stability have shown that SLEC-3 is better in terms of interfacial activity and more effective in lowering interfacial free energy than those of SLES, which has been widely used as a conventional anionic surfactant in the detergent industry. Biodegradability, acute oral toxicity and dermal irritation tests also revealed that SLEC-3 surfactant possesses excellent mildness and low toxicity, indicating the potential applicability in detergents and cleaner products formulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.5
• /
• pp.1909-1928
• /
• 2021

At present, the Colombian government shares information on threats or vulnerabilities in the area of cybersecurity and cyberdefense, from other government agencies or departments, on an ad-hoc basis but not in real time, with the surveillance entities of the Government of the Republic of Colombia such as the Joint Command of Cybernetic Operations (CCOCI) and the Cybernetic Emergencies Response Team of Colombia (ColCERT). This research presents the MS-CSIRT (Management System Computer Security Incident Response Teams) methodology, that is used to unify the guidelines of a CSIRT towards a joint communication command in cybersecurity for the surveillance of Information Technology (IT), Technological Operations (TO), Internet Connection Sharing (ICS) or Internet of Things (IoT) infrastructures. This methodology evaluates the level of maturity, by means of a roadmap, to establish a CSIRT as a reference framework for government entities and as a guide for the areas of information security, IT and TO to strengthen the growth of the industry 4.0. This allows the organizations to draw a line of cybersecurity policy with scope, objectives, controls, metrics, procedures and use cases for the correct coordination between ColCERT and CCOCI, as support entities in cybersecurity, and the different companies (ICS, IoT, gas and energy, mining, maritime, agro-industrial, among others) or government agencies that use this methodology.

• International Journal of Advanced Culture Technology
• /
• v.9 no.1
• /
• pp.177-182
• /
• 2021

The fourth industrial revolution based on information and communication technology (ICT) becomes the center of society, and the overall industrial structure is also changing significantly. ICT refers to the hardware of information devices and the software technologies required for the operation and information management of these devices, and any means of collecting, producing, processing, preserving, communicating and utilizing them. ICT is integrated into industries and services or combined with new technologies in various fields such as robotics and nanotechnology to connect all products and services to the network. The development of ICT, which continuously creates new products and services, has spread to all sectors of the industry, affecting not only daily life but also the livestock sector recently. In agriculture, ICT technology can reduce production costs by efficiently managing labor and energy because it can improve quality and yield based on data on environmental and growth information such as temperature, humidity, light and soil. In particular, smart livestock is considered suitable for achieving livestock management goals because it can reduce labor force and improve productivity by remotely and automatically managing accurate information necessary for raising and breeding livestock with ICT devices. The purpose of this study is to propose the need for ICT technology by comparing farm productivity before and after ICT is introduced. The method of the study is to compare the productivity before and after the introduction of ICT in Korean beef farms, pig farms, and poultry farms. The effectiveness of the study proved the excellence of ICT technology through the production results before ICT introduction and the productivity improvement case of livestock farms that efficiently operated manpower management and reduced labor force after ICT introduction. The conclusion of this paper is to present the need for smart livestock through ICT adoption through case study results.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.6
• /
• pp.776-782
• /
• 2022

Corn-soybean meal diets are commonly used in the pork industry as a primary source of energy and protein. However, such a diet generally contains non-starch polysaccharides (NSPs) which present a challenge in finding ways to improve their availability and digestibility. Dietary multi-carbohydrases (MCs) have been proposed as an efficient approach to utilize NSPs, and can result in improved growth performance and host intestinal fitness. In this study, we evaluated the effects of MC in lactation diets on gut microbiota composition of lactating sows and their litters. The experimental design contained two dietary treatments, a diet based on corn-soybean meal (CON), and CON supplemented with 0.01% multigrain carbohydrases (MCs). Sow and piglet fecal samples were collected on days 7 and 28 after farrowing. Based on the results from 16S rRNA gene amplicon sequencing, MC led to changes in species diversity and altered the microbial compositions in lactating sows and their piglets. Specifically, the MC treatment induced an increase in the proportions of Lactobacillus in piglets. Clostridium and Spirochaetaceae showed a significantly reduced proportion in MC-treated sows at day 28. Our results support the beneficial effects of dietary carbohydrases and their link with improved production due to better host fitness outcomes and gut microbiota composition.

• Korean Journal of Materials Research
• /
• v.32 no.1
• /
• pp.44-50
• /
• 2022

Transition metal carbides (TMCs) are used to process difficult-to-cut materials due to the trend of requiring superior wear and corrosion properties compared to those of cemented carbides used in the cutting industry. In this study, TMC (TiC, TaC, Mo₂C, and NbC)-based cermets were consolidated by spark plasma sintering at 1,300 ℃ (60 ℃min) with a pressure of 60 MPa with Co addition. The sintering behavior of TMCs depended exponentially on the function of the sintering exponent. The Mo₂C-6Co cermet was fully densified, with a relative density of 100.0 %. The Co-binder penetrated the hard phase (carbides) by dissolving and re-precipitating, which completely densified the material. The mechanical properties of the TMCs were determined according to their grain size and elastic modulus: TiC-6Co showed the highest hardness of 1,872.9 MPa, while NbC-6Co showed the highest fracture toughness of 10.6 MPa^*m^1/2. The strengthened grain boundaries due to high interfacial energy could cause a high elastic modules; therefore, TiC-6Co showed a value of 452 ± 12 GPa.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.92-101
• /
• 2021

The status of waste generation and recycling in 32 countries in the European Union (EU), Japan, and the United States was investigated and summarized to encourage overseas market expansion for domestic urban mining industries. Among the 32 EU countries, Germany has the highest amount of material consumption and generates the largest quantity of waste. Minerals such as mine and soil wastes constitute the largest type of waste in the EU. With respect to waste treatment techniques, landfill and recycling are applied to 39% and 38% of the waste, respectively, implying the necessity to promote recycling. Japan's total waste generation declined recently to less than 400 million tons. The largest amount of waste is generated by the manufacturing industries. The proportion of total recycled waste is estimated to be slightly over 50%, but the proportions are greater than 90% for metal scrap and 60% for waste plastics. The amount of waste produced in the United States recently exceeded 265 million tons; 52.1% of the waste is landfilled, while only 25.1% is recycled. Therefore, the recycling industry has to be developed further.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1421-1430
• /
• 2022

The computation of the solid angle and the detector efficiency is considering to be one of the most important factors during the measuring process for the radioactivity, especially the cylindrical γ-ray NaI(Tl) detectors nowadays have applications in several fields such as industry, hazardous for health, the gamma-ray radiation detectors grow to be the main essential instruments in radiation protection sector. In the present work, a generic numerical simulation method (NSM) for calculating the efficiency of the γ-ray spectrometry setup is established. The formulas are suitable for any type of source-to-detector shape and can be valuable to determine the full-energy peak and the total efficiencies and P/T ratio of cylindrical γ-ray NaI(Tl) detector setup concerning the truncated conical radioactive source. This methodology is based on estimate the path length of γ-ray radiation inside the detector active medium, inside the source itself, and the self-attenuation correction factors, which typically use to correct the sample attenuation of the original geometry source. The calculations can be completed in general by using extra reasonable and complicate analytical and numerical techniques than the standard models; especially the effective solid angle, and the detector efficiency have to be calculated in case of the truncated conical radioactive source studied condition. Moreover, the (NSM) can be used for the straight calculations of the γ-ray detector efficiency after the computation of improvement that need in the case of γ-γ coincidence summing (CS). The (NSM) confirmation of the development created by the efficiency transfer method has been achieved by comparing the results of the measuring truncated conical radioactive source with certified nuclide activities with the γ-ray NaI(Tl) detector, and a good agreement was obtained after corrections of (CS). The methodology can be unlimited to find the theoretical efficiencies and modifications equivalent to any geometry by essential sufficiently the physical selective considered situation.

• Journal of Animal Science and Technology
• /
• v.64 no.2
• /
• pp.312-329
• /
• 2022

Feed cost is the main factor affecting the economic benefits of pig industry. Improving the feed efficiency (FE) can reduce the feed cost and improve the economic benefits of pig breeding enterprises. Liver is a complex metabolic organ which affects the distribution of nutrients and regulates the efficiency of energy conversion from nutrients to muscle or fat, thereby affecting feed efficiency. MicroRNAs (miRNAs) are small non-coding RNAs that can regulate feed efficiency through the modulation of gene expression at the post-transcriptional level. In this study, we analyzed miRNA profiling of liver tissues in High-FE and Low-FE pigs for the purpose of identifying key miRNAs related to feed efficiency. A total 212~221 annotated porcine miRNAs and 136~281 novel miRNAs were identified in the pig liver. Among them, 188 annotated miRNAs were co-expressed in High-FE and Low-FE pigs. The 14 miRNAs were significantly differentially expressed (DE) in the livers of high-FE pigs and low-FE pigs, of which 5 were downregulated and 9 were upregulated. Kyoto Encyclopedia of Genes and Genomes analysis of liver DE miRNAs in high-FE pigs and low-FE pigs indicated that the target genes of DE miRNAs were significantly enriched in insulin signaling pathway, Gonadotropin-releasing hormone signaling pathway, and mammalian target of rapamycin signaling pathway. To verify the reliability of sequencing results, 5 DE miRNAs were randomly selected for quantitative reverse transcription-polymerase chain reaction (qRT-PCR). The qRT-PCR results of miRNAs were confirmed to be consistent with sequencing data. DE miRNA data indicated that liver-specific miRNAs synergistically acted with mRNAs to improve feed efficiency. The liver miRNAs expression analysis revealed the metabolic pathways by which the liver miRNAs regulate pig feed efficiency.

• Journal of Powder Materials
• /
• v.30 no.2
• /
• pp.146-155
• /
• 2023

The Ti-6Al-4V lattice structure is widely used in the aerospace industry owing to its high specific strength, specific stiffness, and energy absorption. The quality, performance, and surface roughness of the additively manufactured parts are significantly dependent on various process parameters. Therefore, it is important to study process parameter optimization for relative density and surface roughness control. Here, the part density and surface roughness are examined according to the hatching space, laser power, and scan rotation during laser-powder bed fusion (LPBF), and the optimal process parameters for LPBF are investigated. It has high density and low surface roughness in the specific process parameter ranges of hatching space (0.06-0.12 mm), laser power (225-325 W), and scan rotation (15°). In addition, to investigate the compressive behavior of the lattice structure, a finite element analysis is performed based on the homogenization method. Finite element analysis using the homogenization method indicates that the number of elements decreases from 437,710 to 27 and the analysis time decreases from 3,360 to 9 s. In addition, to verify the reliability of this method, stress-strain data from the compression test and analysis are compared.