• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.301-309
• /
• 2017

This study was conducted to provide basic data needed to calculate the crop loads for the greenhouse design. Four countries' crop loads for greenhouse structures were compared and the crop loads were measured directly and analyzed for various greenhouse crops, including tomato, strawberry, cucumber, and eggplant. According to the analysis results of four country's standards for the design crop loads, it was judged that the new design crop loads suit for greenhouse crops in our country should be suggested because our standards just used the design crop loads of other countries. The maximum crop loads per plant of tomato, cucumber, eggplant, and strawberry were 3.9, 0.75, 1.9 and $2.1kgf{\cdot}plant^{-1}$, respectively. The crop load per unit area of tomato was $8.5kgf{\cdot}m^{-2}$, which was much greater than the cucumber and eggplant's crop load of 2.1 and $2.4kgf{\cdot}m^{-2}$ respectively. The crop loads of tomato and cucumber, suggested by the greenhouse structure design standard of Korea, is $15kgf{\cdot}m^{-2}$, which is far greater than the values suggested by this research. It was judged that this was because our standard just used the Dutch standard, our crop load standard should be reviewed considering this difference. The crop load of strawberry, including the growing bed, was $21.0kgf{\cdot}m^{-2}$, which was much greater than the crop load in the Dutch standard.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.15-25
• /
• 2012

Probabilistic design methods have been used as a design standard in Korea and abroad for achieving reasonable design by considering the statistical uncertainties of soil properties. In this study, the following techniques for reflecting geotechnical uncertainty are analyzed: quantification of the uncertainties of geotechnical random variables, and consideration of economic feasibility in design by minimizing the uncertainties related to the number of samples. To quantify the uncertainties, the techniques were applied to soil properties obtained from samples collected and tested in the field. The results showed an underestimation of the standard deviation by the 3-sigma approach in comparison with calculations using data from the samples. This finding indicates that economical design is possible in terms of probability. However, when compared with the Bayesian approach, which does not consider the number of samples, variability in the 3-sigma approach is underestimated for some variables. This finding also indicates a safety issue, whereas the number of samples based on the Bayesian approach showed the lowest variance. The variance of the probability density function showed a marked decrease with increasing number of samples, to converge at a certain level when the number exceeds 25. Of note, the estimation of values is more reliable for random variables having low variability, such as soil unit weight, and can be obtained with a small number of samples.

• Design Convergence Study
• /
• v.14 no.4
• /
• pp.119-132
• /
• 2015

The enforcement of volume-rate disposal system which has been resulted in reducing the household waste and increasing the amount of recycled contents is showing positive effects that are generating social and economic benefits, However due to the lack of user's perception about how to separate and dispose of recycling wastes, some problems are constantly raised, like food waste is disposed in the standard volume-rate garbage bag. By rearranging visual information printed on standard plastic garbage bags (SPGB), this study attempted to find ways to deliver the information regarding how to use them properly. In order to achieve this, from the perspective of visual information design, the study examined the cases of visual information printed on nine SPGB from domestic and overseas. Among these, this study conducted a survey on user's awareness of visual information printed on SPGB in three districts of Seoul, Korea. As a result, user-preferred items were identified. Based on the result, this study selected information to be printed on SPGB, established the hierarchical order of the selected information, and proposed a guideline for using SPGB with informative graphics; therefore, the effectiveness of information delivery was improved. In addition, this study also examined the external validity of the guideline by comparing a survey on user's awareness.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2010

K-$BEtest^{(R)}$ is a well known program for bioequivalence test using a $2{\times}2$ design. Lee et al.(1998) and Park et al.(1999) suggested a $3{\times}3$ and $3{\times}2$ design, and also discussed their benefits. We developed a computer program, called BioEquiv, which can analyze some complex experimental designs such as, $3{\times}3$ design and $3{\times}2$ design including a standard $2{\times}2$ design. This program is a user-friendly one and overcomes the disadvantages of K-$BEtest^{(R)}$. The detailed statistical formula and structure of BioEquiv are presented with some examples. The comparison between K-$BEtest^{(R)}$ and BioEquiv are given with actual data analysis. BioEquiv is able to present a table of ANOVA test over some complex experimental designs. Moreover K-$BEtest^{(R)}$ and BioEquiv draw the same result when data consists of $2{\times}2$ design.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.129-136
• /
• 2005

The deterministic analysis method has generally used to evaluate the slope stability and it evaluates the slope stability with decision value that is a representative value of design variables. However, one of disadvantages in the deterministic approach is there is not able to consider the uncertainty of soil strength properties, even though it is the biggest influential parameter of the slope stability. On the other hand, the limit state design(LSD) can take a consideration of uncertainties and computes both the reliability index and the probability of failure. LSD method is capable of overcoming the disadvantages of deterministic method and evaluating the slope stability more reliably. In this study, both the mean value and standard deviation of the internal land's representative soil strength properties applied to process the LSD method. The major purpose of this study is to gauge the general applicability of the limit state design in soil slope and to weigh the comparative validity of the proposed partial safety factor. In order to reach the aim of this study, the partial safety factor and resistance factor which totally satisfied the slope's overall safety factor were calculated by the load and resistance safety factor design (LRFD).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.11
• /
• pp.1547-1557
• /
• 2002

The purpose of this study is to find the profitable clothes design of middle-aged men by examining visual effects in physical design. The methode of study is experimentation. The sample of this study is people who live in Kwangiu, Korea and 20-50 age's 719. The difference of physical design effect by arrangement, pattern and the shape of body. There are partly resemblance difference in physical design visual effect by the shape of body and clothes design(arrangement and pattern)In weak type, single suit with striped pattern and double suit with check pattern make the upper body look short. Otherwise, double suit with striped pattern have man look tall. In standard type, single arrangement suit with striped pattern make the lower half of body long, so make man look tall. And double arrangement suit with striped pattern have man look tall. The suit without pattern have one's shoulder look wide. In pyknic type, striped pattern make the lower half of one's body look long. But single arrangement with striped pattern have the upper body look big. sing1e suit with striped pattern make lower half of body look long and check pattern make it look short. Totally, arrangement, and pattern are very important clothes due to give an effect on whole visual effect man's suit. Also, these dues were felt differently by each types of body. So, it is confirmed that the type of body is important fluent to make people perceive.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.48-53
• /
• 2011

In this study, it is to verify the applicability for a simplified model(IEC61400-2, Design Require-ments for Small Wind Turbines, 2006-03) is the international standard is used to the structural design. In the design process of a wind turbine, the safety of a designed wind turbine is one of the most important factors. The simplified model can be used to determine the design load for small wind turbines. So, this paper has been re-evaluated a small wind turbine design loads that produced already. As a result, the material characteristic value(Rchar) of Blade, Rotor shaft and the tower are $90E6[N/m^2]$, $441E6[N/m^2]$ and $94E6[N/m^2]$. Therefore, the value of the applied safety factor to each part of the survival probability of 95% are satisfied.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.14 no.4
• /
• pp.35-42
• /
• 2018

Among the various ground source heat pump systems, vertical-type heat pump systems have been distributed greatly. Most of the vertical-type ground source heat pump systems have been designed based on the Korean Ministry of Knowledge Economy Announcement in Korea. In this study, the design process of the vertical-type ground source heat pump system in the announcement was analyzed, and the effects of the design parameters on the ground loop heat exchanger were investigated. Borehole thermal conductivity was the highest dominant design parameter for ground loop heat exchangers. The borehole thermal conductivity was changed according to the pipe and grout thermal conductivity. For optimal design of the ground heat pump system, it is highly recommended that the design process in the announcement will be revised to adopt the various tubes and grout which have higher thermal conductivity. In addition, the certification standard for heat pump unit should be revised to develop the heat pump with a small flow rate.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.6
• /
• pp.23-31
• /
• 2016

Nowadays abnormal coldness happens frequently in Korea and frost heaving causes unexpected ground deformation which results in severe problems for structures such as roadway, railroad and cutoff slope. 'Frost heave' as one of the primary phenomenon is considered to be an important factor together with 'adfreeze bond-strength' and 'creep deformation' for structural design process in permafrost area. Therefore, the fundamental study for frost heave has to be preceded for design of geo-structures in cold region. While various experimental apparatuses have been developed, there still exist a certain level of limitation to evaluate the frost-heave characteristics as design parameters. There are no standard testing method and criteria for analyzing frost heaving in Korea because temperature controlled testing apparatuses including a freezing chamber are expensive. In this paper, a new standard freezing and thawing testing apparatus is introduced, which simulates various freezing and thawing conditions in a soil specimen by using a temperature controlled triaxial cell. Frost heaving tests were performed to assess the new testing apparatus and experimental procedure to evaluate frost heaving for soils is proposed.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.1
• /
• pp.55-61
• /
• 2007

This paper describes the procedure and calculation results of basic design and transient variation of performance of 1 MWe large scale solar thermal power plant (STPP) by using the commercial software of THERMOFLEX and TRNSYS, respectively. In order to simulate the transient variation of STPP, the results of basic design are necessary. The design standard of the STPP is 1 MWe generation with solar only at high DNI condition and then 0.6 MWe output power for 1 hour using stored energy when the DNI becomes lower unable to operate normally. The results of basic design show the important design data of flow rates, water/steam conditions at each equipments and the estimated efficiency of STPP. In addition, dynamic simulation results of STPP are predicted and plotted for one year and three different days weather data of Daejeon.