• Title/Summary/Keyword: Korea Design Standard

Search Result 3,774, Processing Time 0.034 seconds

Stochastic Optimization Approach for Parallel Expansion of the Existing Water Distribution Systems (추계학적 최적화방법에 의한 기존관수로시스템의 병열관로 확장)

  • Ahn, Tae-Jin;Choi, Gye-Woon;Park, Jung-Eung
    • Water for future
    • /
    • v.28 no.2
    • /
    • pp.169-180
    • /
    • 1995
  • The cost of a looped pipe network is affected by a set of loop flows. The mathematical model for optimizing the looped pipe network is expressed in the optimal set of loop flows to apply to a stochastic optimization method. Because the feasible region of the looped pipe network problem is nonconvex with multiple local optima, the Modified Stochastic Probing Method is suggested to efficiently search the feasible region. The method consists of two phase: i) a global search phase(the stochastic probing method) and ii) a local search phase(the nearest neighbor method). While the global search sequentially improves a local minimum, the local search escapes out of a local minimum trapped in the global search phase and also refines a final solution. In order to test the method, a standard test problem from the literature is considered for the optimal design of the paralled expansion of an existing network. The optimal solutions thus found have significantly smaller costs than the ones reported previously by other researchers.

  • PDF

Design of A Dual-resonance PIFA Using U-Type Slot (U-형 슬랏을 이용한 이중 공진 PIFA 설계)

  • Kim, Yoon-Ho;Rhee, Joong-Geun;Kim, Jung-Hun;Jang, Tae-Heon
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.11
    • /
    • pp.77-83
    • /
    • 2010
  • This paper presents the dual resonance PIFA(Planar Inverted F-Antenna) which satisfies the requirements of the 802.11n standard at both 2.4 GHz and 5 GHz frequency bands. Patch for 2.4 GHz and U-Type slot for 5 GHz were used for dual resonance, respectively. In this paper, the characteristics of an antenna were investigated by varying locations of short plate and feed point, the width of the short plate, the thickness and the location of U-Type slot. To investigate the characteristics of the PIFA, HFSS(High Frequency Structure Simulation) for the simulation was used. And the measurement results of a fabricated PIFA were compared with the simulated ones. The measurement and simulation results show that good dual resonance characteristics as the thickness of U-type slot decreases and when the location of U-type slot is far from the feed point.

Software Release Management System : ThinkSync DM-SoftMan for Wireless Device based on OMA DM (OMA DM 기반의 무선 단말기 소프트웨어 배포 관리 시스템 ThinkSync DM-SoftMan 개발)

  • Ju, Hong-Taek;Park, Kee-Hyun;Bang, Dae-Wook
    • The KIPS Transactions:PartC
    • /
    • v.13C no.5 s.108
    • /
    • pp.641-650
    • /
    • 2006
  • There has been a continued increase in the complexity of software equipped with wireless mobile devices, due to the introduction of new device functionality and services via network connection. The increasement expected to be accelerated by convergence of telecommunication and broadcasting, and proliferation of telematics and home networking services using wireless mobile devices. The higher the complexity of mobile device software, the higher the necessity of management for the software. As for the global standard of mobile device management technology, OMA DM has been widely adopted by device manufacture and expected to be accelerated its adoption. In this paper, we present a development result of mobile device software release management system ThinkSync DM SoftMan. The implementation details of ThinkSync DM SoftMan are provided in implementation architecture and its working scenario based on the design of ThinkSync DM SoftMan that is summarized in this paper as our previous work. The conformance and performance test of the system are presented.

Design of DRM System for Secure Contents Transfer in Home Domain (홈 도메인에서 안전한 콘텐츠 전송을 위한 DRM 시스템의 설계)

  • Lee, Chang-Bo;Kim, Jung-Jae;Moon, Ju-Young;Lee, Kyung-Seok;Jun, Moon-Seog
    • The KIPS Transactions:PartC
    • /
    • v.14C no.3 s.113
    • /
    • pp.221-228
    • /
    • 2007
  • For the usage of the different standard technology among DRM vendors, the DRM technologies in today could not guarantee the interoperability between the digital contents and digital devices. While users have been guaranteed the protection of contents, they have to put up with the limitation and inconvenience. The Superdistribution methods that InterTrust has proposed is the content distribution technology which is possible to use the content only by the user authentication with the license regardless of the acquisition of the DRM contents. However, it need a additional license with re-authentication from DRM server when the original contents need to be moved to other devices from the own device. In this paper, to reduce the inconveniences of re-authentication and re-issue procedures of the license and continually to protect the rights of contents on the offline, we propose the DRM system that creates domain between home devices and enable users to freely transfer contents with the domain.

Design of a Low-Power MOS Current-Mode Logic Circuit (저 전력 MOS 전류모드 논리회로 설계)

  • Kim, Jeong-Beom
    • The KIPS Transactions:PartA
    • /
    • v.17A no.3
    • /
    • pp.121-126
    • /
    • 2010
  • This paper proposes a low-power MOS current-mode logic circuit with the low voltage swing technology and the high-threshold sleep-transistor. The sleep-transistor is used to high-threshold voltage PMOS transistor to minimize the leakage current. The $16{\times}16$ bit parallel multiplier is designed by the proposed circuit structure. Comparing with the conventional MOS current-model logic circuit, the circuit achieves the reduction of the power consumption in sleep mode by 1/104. The proposed circuit is achieved to reduce the power consumption by 11.7% and the power-delay-product by 15.1% compared with the conventional MOS current-model logic circuit in the normal mode. This circuit is designed with Samsung $0.18\;{\mu}m$ standard CMOS process. The validity and effectiveness are verified through the HSPICE simulation.

A Study on the Effects of Ankle Pump Exercise in Reducing Lower Limbs Edema and Pain of Operating Room Nurses (통나무 도구를 이용한 발목 펌프 운동이 수술실 간호사의 하지 부종 및 하지 통증에 미치는 효과)

  • Bae, Hye-Jin;Kim, Joo Hyun
    • Journal of Korean Biological Nursing Science
    • /
    • v.16 no.3
    • /
    • pp.235-243
    • /
    • 2014
  • Purpose: The purpose of this study was to identify the effects of Ankle Pump Exercise on lower limb edema and pain of operating room nurses. Methods: This research was arranged on the basis of the nonequivalent control group pre-post test design. The participants were 41 nurses working in the operating room in 'S' hospital in Seoul and 'H' hospital in Guri City, Korea. Data were collected from August 20 to September 30, 2012. Edema of the lower extremities was measured in terms of the girths of ankles and calves. Pain of the lower extremities was measured in terms of VAS (Visual Analogue Scale) for pain. The data were analyzed by frequency, percentage mean, and standard deviation, using the chi2(p) and t-test, repeated measures ANOVA, and a paired t-test. The SPSS Win 20.0 program was used for analysis. Results: Hypothesis 1 - "There are significant differences in lower extremity edema between the experimental group and the control group." - was partially supported. Hypothesis 2 - "There are significant differences in lower extremity pain between the experimental group and the control group." - was supported. Conclusion: The results of this study demonstrate positive practical effects of the Ankle Pump Exercise in reducing the circumference of both ankles, reducing the circumferential edema of both calves, and alleviating the pain of nurses in the operating room. Based on these findings, application of the Ankle Pump Exercise can be considered as an effective method to prevent nurses' health problems in the lower extremities that can be induced by their work during surgical operations.

Electronic Ballast Design for Power Factor Improvement and Harmonic Reduction (역률개선 및 고조파 저감을 위한 전자식 안정기 설계)

  • Lee, Chung-Sik;Cho, Moon-Taek;Na, Seung-Kwon
    • Journal of Advanced Navigation Technology
    • /
    • v.18 no.5
    • /
    • pp.483-489
    • /
    • 2014
  • Proposed electronic ballast circuit for harmonic reduction includes adding lossless snubber circuit to DC-DC converter. To get inverter for changing DC-AC, a lamp has been changed to equivalence resistance in the standard lamp voltage and current data, also inverter circuit has been interpreted by being changed to R, L, C equivalence circuit. Using converted equivalent circuit, the most suitable circuit constant which can satisfy the characteristics of fluorescent lamps has been decided on and finally designed. It could not only eliminate distortion waveform from pulsation frequency in inverter direct side current but also reduce considerably pulsation rate and switching loss by making input current of inverter discontinuous. The validity for the results of this study has been verified through the experiment to measure harmonic occurrence after applying a newly-manufactured product of electronic ballast to 40 W line tube style fluorescent lamps.

A Study of e-Catalog System for efficiency of B2B electronic commerce Based on XML (B2B 전자 상거래의 효율성을 위한 XML 기반의 e-Catalog 시스템에 관한 연구)

  • 김명진;최종근;김윤기;정회경
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2003.05a
    • /
    • pp.264-267
    • /
    • 2003
  • B2B electronic commerce of various form is gone present and e-Catalog that is used in electronic commerce is important element middle who can express well special quality of corporation's goods and product most effectively from infinite internet space. But, e-Catalog system that is used in electronic commerce is no clear concept and consistent component etc. and is constructing dissimilar system and there is shortcoming that can not use e-Catalog information exchange and transaction thereby. Propose XML(eXtensible Markup Language) in e-Catalog's standard document format to augment interoperability in selfishness species system in treatise that see hereupon, and defined e-Catalog document structure that can process goods information configurationally because using XML Schema. Also, e-Catalog registry system that offer search, registration service using e-Catalog document that is defined by XML design and embody.

  • PDF

Design and Implementation of Real-time Moving Picture Encoder Based on the Fractal Algorithm (프랙탈 알고리즘 기반의 실시간 영상 부호화기의 설계 및 구현)

  • Kim, Jae-Chul;Choi, In-Kyu
    • The KIPS Transactions:PartB
    • /
    • v.9B no.6
    • /
    • pp.715-726
    • /
    • 2002
  • In this paper, we construct real-time moving picture encoder based on fractal theory by using general purpose digital signal processors. The constructed encoder is implemented using two fixed-point general DSPs (ADSP2181) and performs image encoding by three stage pipeline structure. In the first pipeline stage, the image grabber acquires image data from NTSC standard image signals and stores digital image into frame memory. In the second stage, the main controller encode image dada using fractal algorithm. The last stage, output controller perform Huffman coding and result the coded data via RS422 port. The performance tests of the constructed encoder shows over 10 frames/sec encoding speed for QCIF data when all the frames are encoded. When we encode the images using the interframe and redundency based on the proposed algorithms, encoding speed increased over 30 frames/sec in average.

The Design and Implementation of Outer Encoder/Decoder for Terrestrial DMB (지상파 DMB용 Outer 인코더/리코더의 설계 및 구현)

  • Won, Ji-Yeon; Lee, Jae-Heung;Kim, Gun
    • The KIPS Transactions:PartA
    • /
    • v.11A no.1
    • /
    • pp.81-88
    • /
    • 2004
  • In this paper, we designed the outer encoder/decoder for the terrestrial DMB that is an advanced digital broadcasting standard, implemented, and verified by using ALTERA FPGA. In the encoder part, it was created the parity bytes (16 bytes) from the input packet (188by1e) of MPEG-2 TS and the encoded data was distributed output by the convolutional interleaver for Preventing burst errors. In the decoder part, It was proposed the algorithm that detects synchronous character suitable to DMB in transmitted data from the encoder. The circuit complexity in RS decoder was reduced by applying a modified Euclid's algorithm. This system has a capability to correct error of the maximum 8 bytes in a packet. After the outer encoder/decoder algorithm was verified by using C language, described in VHDL and implemented in the ALTERA FPGA chips.