• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.139-149
• /
• 2019

For retaining wall designs, horizontal earth pressure induced by traffic loads over the walls is calculated based on equivalent uniform pressure height. The AASHTO LRFD design standards propose equivalent uniform pressure height of traffic loads; however, the equivalent uniform pressure height is calibrated using the US standard trucks. As the domestic standard trucks are different from the US standard trucks, in this study, new domestic equivalent uniform pressure height is proposed using the Boussinesq theory varying vehicle directions, Poisson's ratios of pavement layers, and retaining wall height. The proposed equivalent uniform pressure heights are generally higher than those proposed by the AASHTO design standards because the axle loads and their densities of two domestic standard trucks are higher than those of the US standard trucks. The most highest equivalent uniform pressure height was found for traffic direction perpendicular to longitudinal direction of retaining wall.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2004.05a
• /
• pp.126-127
• /
• 2004

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.04a
• /
• pp.101-106
• /
• 1997

In order to check the safety against earthquakes a seismic design of an arch bridge is carried out in this study according to the Division V (Seismic Design) of the "Standard for the Roadway Bridges", where the application procedures including the determination of coefficients, the analysis method as well as the safety checks are provided. provided.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.21 no.4
• /
• pp.17-25
• /
• 2015

Purpose: At the moment, There is a facility standard for intensive care units on the Korea medical services Act. However, the contents of regulation are so limited and difficult to apply. Therefore, it is necessary to draw up the guideline to complement the regulation for efficient operation of intensive care units. This study aims to suggest basic data for guideline of intensive care units. Methods: 2 Methods have been used in this paper. 1) Comparative analysis between the national regulation of Korea with the design standard of the United States America, the United Kingdom and Australia. 2) A literature survey about operation method for intensive care unit, focused on materials published in intensive care medicine society of each country. Results: In comparison with guideline of abroad cases, additional supplement are required, with regard to item such as operation environment, size, nursing manpower ratio, bed space area, space program of intensive care units for healing environment. Implications: This study is a basic research for guideline of intensive care unit, and need to be followed by further study using various perspectives and methods.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.4
• /
• pp.225-233
• /
• 2012

A comprehensive research effort in order to develop and disseminate modernized Korean housing (Hanok) has recently been initiated by Korean government. This large scale research project encompasses a wide spectrum of housing development including public policy, architectural plans, modules, construction materials and methods, prefabricated assemblies, automated production, construction management, and advanced information systems. For the purpose of integrating and automating the whole processes from an industry perspective, it is of great importance to develop a standard classification system and project numbering system (PNS) for the modernized Korean housing. This paper focuses on the standard classification systems and PNS for cost and schedule control. The distinct characteristics and managerial requirements were explored and embedded into the proposed classifications for modernized Hanok.

• KIEAE Journal
• /
• v.13 no.5
• /
• pp.31-42
• /
• 2013

Green Standard for Energy and Environmental Design (G-SEED) is evaluates the eco-friendliness of the building as an abjective means. Study in green building is made actively, and is being developed through constant revision. However, study results of green building have not been fully reflected in the standard. Therefore, this study analyzes the previous studies about G-SEED and checks the reflection of requirements. This study will be a reference of future revision of G-SEED. Score of items are divided into low and high score items. These items should be reflected appropriately in the standard through the score adjustment. Some requirements proposed in previous studies was reflected, while substantial requirements was not reflected. Proposed improvement requirements are classed as to establish specific standards, strengthen standards, propose a new evaluation method to existing items, and add new items.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.291-294
• /
• 2001

This study has established an appraisal standard to select VE subject when they evaluate of design VE by using of a qualify model in an early design step and has suggested an improvement method for importance's estimation method of an appraisal standard. An importance's estimation method is to arrangement of geometric average method using an AHP method to this study, When an evaluation of a quality model, we estimate an importance by establishing of an appraisal standard of economics, construction, security, environmental influence, maintenance, etc.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.4
• /
• pp.503-512
• /
• 2024

In the seismic design standard, input waves for different levels of seismic performance are proposed in the form of design response spectra. At the time of establishing these standards, measured records of significant earthquakes that occurred domestically, such as the 2016 Gyeongju earthquake and the 2017 Pohang earthquake, were not included. Additionally, for the ground response analysis, shear wave velocities representing ground amplification characteristics were derived from the results of standard penetration tests (N-values) and applied in empirical formulas. This approach may not adequately capture sufficient information about the characteristics of domestic ground properties. Therefore, in this study, seismic records from the Gyeongju and Pohang earthquakes were modified to adjust the bedrock standard design response spectra. Ground response analyses were conducted using shear wave velocity profiles obtained from borehole tests in the Sejong City area. The shape of the response spectrum and ground amplification coefficient obtained from the ground response analysis were then compared with those from existing studies and seismic design standard.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.417-426
• /
• 2000

This paper introduces the ISO 3010 which is the design standard for seismic action of International Standard Organization. Specially this paper focuses on the philosophical background and the weakness of ISO 3010,. The ISO 3010\ulcorner(Bases for design of structures-Seismic action on structure) were made in 1998 by the efforts of ISO/TC98 which is one working group of ISO. TC98 deals with " Bases for design of structures" in the field of architectural and civil engineering. The revised Committee Draft ISO/CD 3010 was made in February 1999. Even if ISO 3010 has not been complete yet this study carry out critical review of this committee draft.tee draft.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.695-698
• /
• 2005

The finite-field multiplication can be applied to the wide range of applications, such as signal processing on communication, cryptography, etc. However, an efficient algorithm and the hardware design are required since the finite-field multiplication takes much time to compute. In this paper, we propose a radix-4 systolic multiplier on $GF(2^m)$ with comparative area and performance. The algorithm of the proposed standard-basis multiplier is mathematically developed to map on low-cost systolic cell, so that the proposed systolic architecture is suitable for VLSI design. Compared to the bit-serial and digit-serial multipliers, the proposed multiplier shows relatively better performance with low cost. We design and synthesis $GF(2^{193})$ finite-field multiplier using Hynix $0.35{\mu}m$ standard cell library and the maximum clock frequency is 400MHz.