초록
옹벽 설계에서는 차량하중에 의해 유발되는 수평토압을 등가상재하중 높이를 토대로 계산한다. 미국 AASHTO의 LRFD 설계 기준은 미국 표준트럭을 대상으로 선정되었기 때문에 국내의 표준트럭과 부합하는 새로운 등가상재하중 높이를 산정 할 필요가 있다. 본 연구에서는 미국 표준트럭과 다른 국내 표준트럭의 특성을 반영하고 차량주행방향, 포장층의 포아송비, 옹벽높이를 고려하여 Boussinesq 이론에 근거한 국내 등가상재하중 높이를 제안하였다. 국내 표준트럭의 축하중과 하중 밀도가 미국 표준트럭보다 높기 때문에, 본 연구에서는 제안한 등가상재하중 높이는 미국 설계 기준에 제안된 등가상재하중 높이 보다 큰 것을 확인하였다. 가장 높은 등가상재하중 높이는 차량주행방향이 옹벽길이방향과 직교할 때로 확인되었다.
For retaining wall designs, horizontal earth pressure induced by traffic loads over the walls is calculated based on equivalent uniform pressure height. The AASHTO LRFD design standards propose equivalent uniform pressure height of traffic loads; however, the equivalent uniform pressure height is calibrated using the US standard trucks. As the domestic standard trucks are different from the US standard trucks, in this study, new domestic equivalent uniform pressure height is proposed using the Boussinesq theory varying vehicle directions, Poisson's ratios of pavement layers, and retaining wall height. The proposed equivalent uniform pressure heights are generally higher than those proposed by the AASHTO design standards because the axle loads and their densities of two domestic standard trucks are higher than those of the US standard trucks. The most highest equivalent uniform pressure height was found for traffic direction perpendicular to longitudinal direction of retaining wall.