• 제목/요약/키워드: Kim's model

검색결과 15,528건 처리시간 0.044초

계층적 RAM 시뮬레이션 모델 프레임워크 (A Hierarchical RAM Simulation Model Framework)

  • 김혜령;최상영
    • 한국군사과학기술학회지
    • /
    • 제13권1호
    • /
    • pp.41-49
    • /
    • 2010
  • In this paper, we propose a hierarchical RAM simulation model framework which are used to analyze the RAM specifications on the concept refinement phase. The hierarchical RAM simulation model framework consists of RAM simulation models, class library and each model's input and output data lists. The hierarchical RAM simulation models are co-operated with 3 kinds of model - type I, II, III. Type I, II models are used to analyze the target operational availability and Type III is used to establish the initial RAM specifications. Each model's input and output data lists are defined by considering each model's purpose of RAM analysis. The class library is arranged with each model's classes for implementing the hierarchical simulation models. The proposed framework may be applied for executing the RAM activities effectively.

A Simple Lagrangian PDF Model for Wall-Bounded Turbulent Flows

  • Lee, Chang-Hoon;Kim, Byung-Gu;Kim, Nam-Hyun
    • Journal of Mechanical Science and Technology
    • /
    • 제14권8호
    • /
    • pp.900-911
    • /
    • 2000
  • A simple Lagrangian pdf model is proposed with a new numerical algorithm for application in wall-bounded turbulent flows. To investigate the performance of the Lagrangian model, we minimize model's dependence on empirical constants by selecting the simplest model for turbulent dissipation rate. The effect of viscosity is also included by adding a Brownian random walk calculate the position of a particle. For the no-slip condition at the wall and correct nearwall behavior of velocity, we develop a new boundary treatment for the particles that strike the wall. By applying the model to a fully developed turbulent channel flow at low Reynolds number, we investigate the model's performance through comparison with direct numerical simulation result.

  • PDF

제주시험림의 붉가시나무 수간형태와 수간곡선식 추정 (Development of Stem Profile and Taper Equation for Quercus acuta in Jeju Experiment Forests)

  • 정영교;김대현;김철민
    • 한국산림과학회지
    • /
    • 제99권1호
    • /
    • pp.57-61
    • /
    • 2010
  • 본 연구는 난대산림연구소의 제주시험림에 있는 붉가시나무(Quercus acuta)에 대한 개체목의 수간곡선식 추정 및 간재적을 추정하기 위하여 수행되었다. 최적의 추정식을 선택하기 위하여 Max and Burkhart식, Kozak식 및 Lee식을 적용하여 각 식의 직경 추정에 대한 검정 통계량 및 실측치와 추정치간의 오차분포를 검증하였다. 그 결과 Max and Burkhart식 및 Lee식이 특정 구간에서 과대치 또는 과소 추정치를 보인데 반하여 Kozak식은 전구간에서 고른 분포를 보였다. 추정력이 가장 좋은 Kozak식을 활용하여 수피포함 재적표를 작성하였다.

국립산림과학원 제주시험림의 서어나무 수간형태와 수간곡선식 추정 (Development of Stem Profile and Taper Equation for Carpinus laxiflora in Jeju Experimental Forests of Korea Forest Research Institute)

  • 정영교;김대현;김철민
    • 농업생명과학연구
    • /
    • 제44권4호
    • /
    • pp.1-7
    • /
    • 2010
  • 본 연구는 난대산림연구소의 제주시험림에 있는 서어나무 (Carpinus laxiflora)에 대한 개체목의 수간곡선식 추정 및 재적표를 개발하기 위하여 수행하였다. 최적의 추정식을 선택하기 위하여 Max & Burkhart식, Kozak식 및 Lee식을 적용하여 수간곡선식을 유도한 후, 각 식의 직경 추정에 대한 검정 통계량 및 실측치와 추정치간의 오차분포를 검증하였다. 그 결과 Max & Burkhart식 및 Lee식이 특정 구간에서 과대치 또는 과소 추정치를 보인데 반하여 Kozak식은 전구간에서 고른 분포를 보였다. 추정력이 가장 좋은 Kozak식을 활용하여 수피포함 재적표를 작성하였다.

경화모델에 따른 고강도강판 S-rail 성형공정에서의 스프링백 모드 비교 (Comparison of Springback Modes in the Stamping Process of an S-rail with HSS according to the Hardening Model)

  • 최병현;이진우;김세호;이명규;김흥규
    • 소성∙가공
    • /
    • 제22권1호
    • /
    • pp.30-35
    • /
    • 2013
  • In this study, springback amounts of an S-rail are quantitatively compared according to the hardening model using a finite element simulation for the stamping process with high strength steels. For comparison of the hardening models, two types of hardening models were investigated. The two models were isotropic hardening and kinematic hardening. For the analysis with kinematic hardening, the Yoshida-Uemori model was selected. Five kinds of springback modes were measured at designated sections and a comparison was made between the experiment and the analyses with two types of hardening models. The analysis results show that the springback in the flange and the wall curl are predicted more accurately with a kinematic hardening model.

AUTOCORRELATION FUNCTION STRUCTURE OF BILINEAR TIME SREIES MODELS

  • Kim, Won-Kyung
    • Journal of the Korean Statistical Society
    • /
    • 제21권1호
    • /
    • pp.47-58
    • /
    • 1992
  • The autocorrelation function structures of bilinear time series model BL(p, q, r, s), $r \geq s$ are obtained and shown to be analogous to those of ARMA(p, l), l=max(q, s). Simulation studies are performed to investigate the adequacy of Akaike information criteria for identification between ARMA(p, l) and BL(p, q, r, s) models and for determination of orders of BL(p, q, r, s) models. It is suggested that the model of having minimum Akaike information criteria is selected for a suitable model.

  • PDF

폰탄 수술에서 문합방법에 따른 혈류 변화 (Blood Flow Changes by Anastomotic Method in Fontan Operation)

  • 김상현;박영환;조범구;김종훈;홍유선;김영호;김승수
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1996년도 춘계학술대회
    • /
    • pp.203-206
    • /
    • 1996
  • To understand the local fluid dynamics for different desists of Fontan operation, five models were made out of Pyrex glass to facilitate in-vitro study. Model I, II and III have same position of the center of the anastomosis of the IVC( inferior vena cava) with that of the SVC(superior vena cava), but Model IV and V have 10 mm offset between them. Also the anastomotic junction angles are different(Model I and $IV:90^{\circ}$, Model II and $V:70^{\circ}$, Model $III:45^{\circ}$). These models were then connected to a flow loop for flow visualization study. In Model I any dominant vortex was not seen in the central region of the juntion, but a large unstable vortex was created in the Model II and III. In Model IV and V a significant stagnation region was created in the middle of the offset region. It also showed that the flow direction from the IVC and SVC to the LPA(left pulmonary artery) and RPA(right pulmonary artery) highly depends on the offset of the junction rather than the anastomotic junction angle.

  • PDF

Types and Expression Characteristics of Model Poses in Modern Fashion Photographs -Focused on Patrick Demarchelier's Fashion Photos-

  • Kim, Young-Min;Kim, Jang-Hyeon;Kim, Young-Sam
    • 한국의류학회지
    • /
    • 제38권5호
    • /
    • pp.769-782
    • /
    • 2014
  • This study considers the correlation between model pose and clothes in Patrick Demarchelier's fashion photos as well as expression characteristics. The conclusions of the study are as follows. The type of model pose in Patrick Demarchelier's fashion photos can be categorized into five types: maximized type of upper and lower body part, minimized type of upper and lower body part, maximized type of upper body and minimized type of lower body part, minimized type of upper body and maximized type of lower body part, basic type of upper and lower body part. In case of having examined the correlation between body movement and costume, the clothes in the model pose included in the maximization of the body were formed mainstream by silhouette, which was formed by decorative elements or full drapery. In the model poses included in the reduction of the body, the costume tended to expose many parts of the body to provide a simple or structural silhouette form. The costume was expressed in colorful form and poses assumed without body movements. The expression characteristics of the model poses in Patrick Demarchelier's fashion photos were sensuality, dynamicity, and simplicity. First, sensuality was expressed as feminine sensuality accompanying an erotic mood by naturally emphasizing a woman's breast or leg by reducing the body. Second, dynamicity provided a vividness to the image as if directly living and moving by highlighting the rhythmic aspect of the body. Simplicity aroused the effect of paying attention to clothes or other incidental elements rather than the image expressed by the body of a model by excluding body movement.

동태적 정보서비스 품질 관리 모델 (Dynamic Information Service Quality Model)

  • 김상욱;정재림;조현웅
    • 한국시스템다이내믹스연구
    • /
    • 제12권4호
    • /
    • pp.125-156
    • /
    • 2011
  • The information service management models developed thus far have put their focuses mostly on technical dimensions of information systems (IS), finding their rationale from the goods-dominant logic (GDL) that IS as goods has value in itself. Information systems, however, is nothing more than a mechanism by which value is delivered to the users. According to the service-dominant logic (SDL), value is created and determined not at the time serve is made by the providers but at the time it is consumed by the users. The users therefore should be regarded as active value creators not as passive consumers of the value delivered by the providers. Based on the service-dominant logic, DISQM (Dynamic Information Service Quality Model) is developed. DISQM's backbone is designed in causal loop diagrams referring to and reinterpreting in systems thinking the 'Parasuraman, Zeithaml & Berry's GAP Model' and 'SERVQUAL' as an operational tool for the GAP Model, and the main IS success constructs are mapped onto the model exploiting the 'DeLone & MacLean's IS Success Model'. With VENSIM simulation software, this paper also shows how DISQM works in computer-simulation settings. After confirming DISQM's validity with the base simulation run, two scenarios are developed for the exemplary purpose and tested in terms of IS quality, service quality, and net benefits from the service for the public information service. Implications from the simulation runs are also discussed.

  • PDF

ASYMPTOTIC ANALYSIS FOR PORTFOLIO OPTIMIZATION PROBLEM UNDER TWO-FACTOR HESTON'S STOCHASTIC VOLATILITY MODEL

  • Kim, Jai Heui;Veng, Sotheara
    • East Asian mathematical journal
    • /
    • 제34권1호
    • /
    • pp.1-16
    • /
    • 2018
  • We study an optimization problem for hyperbolic absolute risk aversion (HARA) utility function under two-factor Heston's stochastic volatility model. It is not possible to obtain an explicit solution because our financial market model is complicated. However, by using asymptotic analysis technique, we find the explicit forms of the approximations of the optimal value function and the optimal strategy for HARA utility function.