• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.87-88
• /
• 2006

Generator has responded quickly with variation of power system voltage and is controlled at real time. As a reactive power source, generator is revalued better than power condenser and as a reactive power sink, is revalued. But Domestic generators scarcely have been tested and operated to reactive power capability. In case of power system fault, operators wouldn't quickly take a follow-up measures about reactive power disturbance. Therefore generator reactive power capability verification strategy must be developed, several generators is tested as a exhibition since 2004. This paper is extract from the test contents.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.535-536
• /
• 2006

This paper reports investigation into the factors that influence the transient behavior of the wind power generation system following network fault conditions. It is shown that the critical clearing time(CCT) can be affected by various factors contributed by the host network. Such factors include capacity of wind power, power factor, the length of the interfacing line, etc. This investigation is conducted en a simulated grid-connected wind farm using Digsilent Power Factory.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.30-32
• /
• 2006

New building, reinforcement, maintenance and test of power equipments are always necessary in a power system. Our power system is getting old and the total power capacity is also getting large, so power equipment outages are getting often. Power euipment outages make less margine for a stable condition of a power system operation. Therefore, through overviews and countermeasures against the outage should be made in order to be in a stable operational conditions during the outage. We have too many outages over 300 per month in our power system. So, we can't have enough time to study our power system and to make countermeasures without a helping program. This program is designed to give various and appropriate informations necessary for an outage scheduling. By applying this program, we can raise the job efficiency high and spare the time spent. So we can afford to do through system studies and make good countermeasures. I think this program can contribute greately to power system stable operation.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.220-222
• /
• 2005

When a large-scale load or a new generator is connected to power systems, KPX assesses the effect of the connection on power systems to keep security and reliability standards. As the number of connection requests has been increased, KPX is spending much time for technical assessments of the requests. This paper developed an automatic assessment program to reduce analysis time and enhance simulation accuracy. The program is based on IPLAN and. can be applied to both load and generator network connection requests.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.236-238
• /
• 2004

In recent years wind turbine technology has undergone the rapid development in response to the demands for increased use of renewable sources of energy. Using wind turbines for production of electrical energy requires reliable operation. The increased share of wind power in electrical system makes it necessary to have grid-friendly interfaces between the wind turbines and the grid in order to maintain power quality. Increasingly wind turbines are being connected into electricity distribution system. The grid-connected wind power stations have many impacts on power systems such as voltage variations, harmonics. The paper investigates the influences of grid-connected wind power generation system on substation bus voltage.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.99-101
• /
• 2002

This paper is to introduce the R&D project called "System Protection with emphasis on Power System Stability". The principal objective of this project is protection aids to system stability. The objects of this project arc as follows. First, drawbacks of classical under frequency load shedding and implementation issues of the rate-of-change of frequency will be described. Secondly, the project discusses the possibilities of voltage instability in power system and how this risk will affect protective relays in real system. Lastly, special protection system is designed to preserve system stability for KEPCO.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.40-41
• /
• 2008

본 논문에서는 한국형 통합 에너지관리시스템(K-EMS)용 발전계획 응용프로그램 중에서 경제급전(Economic Dispatch) 프로그램 개발의 상세 내용을 소개한다. 특히 복합화력에서 가스터빈(GT)과 스팀 터빈(ST)의 현재출력을 고려하여 등가복합화력기로 변환하여 경제배분에 포함시키는 방안 및 데이터 이상 또는 데이터 미비 처리 방안 등을 소개한다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.294-295
• /
• 2008

Korea has excellent IT capability. Adding Information Technology to KPX's experience of Power system operation, KPX is developing KEMS(Korea EMS) through cooperation between industry and the academic world. Monitoring EMS's essential elements is necessary for the EMS functions which are managing massive realtime data. This paper describes the most important and advanced structure of the TRMS(Total Resource Management System) in the process of developing KEMS(Korean Energy Management System).

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.1-10
• /
• 2013

The power industry is currently facing many challenges, due to the new environment created by the introduction of smart grid technologies. In particular, the large-scale deployment of electric vehicles (EVs) may have a significant impact on demand for electricity and, thereby, influence generation and transmission system planning. However, it is difficult to deal with uncertainties in EV charging loads using deterministic planning methods. This paper presents a two-stage stochastic decomposition method with Latin-hyper rectangle sampling (LHRS) to solve the integrated generation and transmission planning problem incorporating EV deployment. The probabilistic distribution of EV charging loads is estimated by Latin-hyper rectangle sampling (LHRS) to enhance the computational performance of the proposed method. Numerical results are presented to show the effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.134-136
• /
• 2002

In April of 2000, the Korea Power Exchange(KPX) was introduced into Korea electricity market. The purpose of this paper is to describe how the system operator indicates operational risks between the transmission planning and the supply and demand growth to make the market "work" and manage the power system in real time. This paper describes the experiences of kpx about the indication of operational risks including, for example, contingency analysis, voltage profile and fault capacity of three-phase short current.