• Journal of the Korean Ceramic Society
• /
• v.42 no.7 s.278
• /
• pp.516-520
• /
• 2005

Conditions for formation of perovskite Pb(Zr$_{0.52}$Ti$_{0.48}$)O$_{3}$ phase by the hydrothermal synthesis are investigated. Pb(Zr$_{0.52}$ Ti$_{0.48}$)O$_{3}$ ceramics were synthesized by hydrothermal process above 180$^{\circ}C$ for 2 h reaction using 5$\~$30 M KOH solution as a mineralizer. Particle size increases in proportion to the mineralizer concentration. As a result of EOX analysis, PZT powders synthesized using 50 M of KOH as a mineralizer were considered as 2.42 mol$\%$ K doped-PZT powders. And 2.42 mol$\%$ K doped-PZT has much higher mechanical quality factor than undoped PZT ceramics. The sintering properties showed 7.987 g/cm$^{3}$ of sintered density and 3$\~$4 $\mu$m of grain size.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.87-93
• /
• 1995

Strontium titanate single crystal was grown by floating wne method. Growth conditions are as follows; at air atmosphere, rotation rate of upper and lower shafts were 20 - 25 rpm, 15 - 20 rpm respectively and growth rate was 3 mmlhr. As grown crystal was light brown color and transparent. After annealing, color was faded away. Growth direction was [112] direction and it was confirmed that grown crystal has $SrTiO_3$single phase and stoichiometric composition by XRD and EDS. Etch pit pattern was investigated after chemical etching in $350^{\circ}C$, KOH solution for 5 min and dielectric constant was measured at the range of room temperature ~ $350^{\circ}C$ .

• Journal of Radiation Protection and Research
• /
• v.9 no.2
• /
• pp.61-66
• /
• 1984

A study on the characteristics of ${\alpha}$-particle track on cellulose nitrate film was carried out with a particular emphasis on the dependence of track diameter upon chemical etching condition. The track diameters etched in KOH solution appeared to be, on average, three times larger than those etched in NaOH under the same etching condition. The relationship between the track diameters and both etching time and the energy of incident ${\alpha}$-particles was also investigated. It is shown that the particle fluence rate is fairly independent of etching time as far as the condition of irradiation remains unchanged.

• Macromolecular Research
• /
• v.16 no.8
• /
• pp.734-740
• /
• 2008

A new crosslinked, poly(acrylic acid)-based, dehydrating agent was synthesized through solution polymerization. The Taguchi method, a robust experimental design, was adopted to optimize the synthetic conditions based on the moisture and water absorbing capacities of the dehydrating agent. The method applied for the experiment was a standard L27 ($3^8$) orthogonal array with eight parameters and three levels. By analyzing the variance of the test results, the most effective parameters to control the moisture absorbing capacity (MAC) and its rate were the kind of alkaline base (LiOH, NaOH, or KOH) used as a neutralizing agent of the acrylic acid monomer and the degree of neutralization: The maximum MAC of 40% was achieved at only 2 hat $32^{\circ}C$ and 50% RH when KOH was used as a base and the degree of neutralization was 90%, respectively. However, the water absorbing capacity (WAC) of the resulting dehydrating agent was very low at 158 g/g, indicating that WAC is unaffected by MAC and its rate in this system. The surface morphologies of the agents were examined using scanning electron microscopy (SEM).

• Current Photovoltaic Research
• /
• v.1 no.1
• /
• pp.69-72
• /
• 2013

Combined nano- and micro-wires (CNMWs) Si arrays were prepared using PR patterning and silver-assisted electroless etching. A $POCl_3$ doping process was applied to the fabrication of CNMWs solar cells. KOH solution was used to remove bundles in CNMWs and the etching time was varied from 30 to 240 s. The lowest reflectance of 3.83% was obtained at KOH etching time of 30 s, but the highest carrier lifetime of $354{\mu}s$ was observed after the doping process at 60 s. At the same etching time, a $V_{oc}$ of 574 mV, $J_{sc}$ of $28.41mA/cm^2$, FF of 74.4%, and Eff. of 12.2% were achieved in the CNMWs solar cell. CNMWs solar cells have potential for higher efficiency by improving the post-process and surface-rear side structure.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.132-137
• /
• 2010

This study is concerned the electrocatalytic generation of oxygen gas at electrochemically deposited manganese oxide electrode in KOH solution. Manganese oxide nanoparticles electrodeposited onto relatively substrate, e.g glassy carbon, Au, Ti electrode. MnOx is electrodeposited in nanorod structure which cover the overall surface of the substrate. The $\gamma$-MnOOH that is kind of manganese oxide species plays a significant role as a catalytic mediator, which promote 4-electron reduction process. Modified electrodes with electrodeposited manganese oxide structures resulted in significant decrease in the anodic polarization compared with the unmodified electrodes in alkaline media.

• Carbon letters
• /
• v.9 no.3
• /
• pp.188-194
• /
• 2008

Porous carbon materials synthesized from various plant derived precursors i.e. seeds of [Castor (Ricinus communis), Soap nut (Sapindus sp.), Cashew-nut (Semecarpus anacardium), Jack fruit (Artocarpus heterophyllus), Safflower (Carthamus tinctorius), Ambadi (Crotolaria juncea), Neem (Azadirachta indica), Bitter Almond (Prunus amygdalus), Sesamum (Sisamum indicum), Date-palm (Phoenix dactylifera),Canola (Brassica napus), Sunflower (Helianthus annulus)] and fibrous materials from [Corn stem- (Zea mays), Rice straw (Oryza sativa), Bamboo (Bombax bambusa) and Coconut fibers (Cocos nucifera)] were screened to make supercapacitor in 5M KOH solution. Carbon material obtained from Jack fruit seeds (92.0 F/g), Rice straw (83.0 F/g), Soap nut seeds (54.0 F/g), Castor seeds (44.34 F/g) and Bamboo (40.0 F/g) gave high capacitance value as compared to others. The magnitude of capacitance value was found to be inversely proportional to the scan rate of measurement. It is suggested that carbon material should possess large surface area and small pore size to get better value of capacitor. Moreover, the structure of carbon materials should be such that majority of pores are in the plane parallel to the plane of electrode and surface is fluffy like cotton ball.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.189-194
• /
• 2011

Si-cell was prepared with various types owing to the etching times textured by the KOH etching solution. The pn junction for solar cell was prepared on p-type Si wafer by the furnace using the $POCl_3$ and oxygen mixed precursor, and the metalization was done using by the Al back electrode and Ag front electrode. Textured Si surface was etched by the pyramid formation. The efficiency and the fill factor was increased in the Si-cell with a large size of pyramids, because of the series resistances decrease depending on the increasing of the photon absorbance. Increasing of the absorbance occurred the induction of the short current and open voltage, and then the efficiency was increased.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.795-800
• /
• 2009

In this study, the $CO_2$ removal characteristics of the Vortex tube type absorbtion apparatus were investigated to enhance the compactness of $CO_2$ absorption process and to reduce the amount of absorbing solution of the $CO_2$ separation process. The Vortex tube with the diameter of 17 mm and the length of 250mm was introduced in the experimental apparatus to treat $20Nm^3/hr$ of $CO_2$ containing flue gas. The flue gases for experiments containing 11~13 vol% of $CO_2$ were supplied from the coal-firing CFBC power plant with 12 ton/hr of steam producing capacity. The mixed solutions of 20 wt% of MEA as base solution with the adding solutions like HMDA, AMP and KOH were used as absorbents. The experiments were executed under the various conditions like the absorbing solution concentrations in the range of 20 to 50 wt%, the flow rate of $CO_2$ containing flue gases in the range of 6 to $15Nm^3/hr$ and the flow rate of absorbing solution in the range of 1.0 to 3.0 l/min. As a results, the $CO_2$ removal efficiency of mixed absorbent of 20 wt% of MEA with HMDA was remarkable. From this study, we concluded that the efficient separation of $CO_2$ from flue gases using the features of the Vortex tube type absorbing unit for gas/liquid contact and the separation of gas/liquid be possible. But more works are needed to increase the $CO_2$ removal efficiency of Vortex tube process.

• Membrane Journal
• /
• v.28 no.5
• /
• pp.368-377
• /
• 2018

The n-nitrilotris(methylene) phosphonic acid (NTPA) potassium salt was synthesized as a draw solute for forward osmosis. NTPA-4K, NTPA-5K and NTPA-6K were synthesized by varying the content of KOH added to NTPA and confirmed by $^1H$-NMR and $^{13}C$-NMR. The osmotic pressure, viscosity, water flux and reverse salt flux were measured to characterize the draw solute. In the forward osmosis process when distilled water was used as a feed solution and 0.5 M of NTPA-4K, NTPA-5K and NTPA-6K were used as a draw solution, the water flux was 35.8, 38.8 and 42.2 LMH, the reverse salt flux was 5.4, 6.9 and 7.4 gMH, respectively. It was confirmed that the water flux was lower than the conventional NaCl draw solution, but the reverse salt flux was much lower. In order to recover the diluted draw solution, nanofiltration was conducted. The results showed that the draw solute could be retained by above 90%.