• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.1
• /
• pp.27-34
• /
• 2020

Human access is restricted to environment where radiation sources are used, however observation equipment should be radiation-resistant as it is exposed. Therefore, if tungsten with the highest specific gravity and melting point and the lowest lead were selected to reduce the dose to the Cobalt 60 radiation source to 1/8, Tu had a volume of 432.6cm3, a thickness of 2.4cm, and Pb had a volume of 961cm3,, a thickness of 3.6cm. By applying this method, produced a radiation resistant CMOS camera with a camera module using a CMOS Image sensor and a radiation shielding structured housing. As a result of applying the head detachable 2M AHD camera (No. ①) that survived the experiment to select the optimal shielding thickness, when shielding the associated equipment such as cameras, adapters, etc. is achieved, it was confirmed that the design of the structure is appropriate by operating well at doses higher than 1.88×106rad. Therefore, it is expected to secure the camera technology and business feasibility that can be applied to high radiation environments.

• Korean Journal of Applied Biomechanics
• /
• v.30 no.2
• /
• pp.155-163
• /
• 2020

Objective: This study to identify the mechanism of head impact that occurs during youth soccer game with regard to head injuries in sports. Method: Ten male subjects (age: 10.0±2.0 yrs.) were participated during 10 soccer practices spread out over a time period of 10 weeks. During each soccer game, the participants agreed and wore the X-Patch (wireless accelerometer, gyroscopes). The X-Patch records the head impact mechanics, such as peak linear acceleration (PLA), peak rotational acceleration (PRA), peak rotational velocity (PRV), Head Injury Criterion (HIC), and the location of impact. Results: A total of 501 impacts to the head were measured over the 10 soccer games, PLA 17.8±10.4 g, PRA 3168±2442 rad/s²; PRV 16.1±10.6 rad/s; HIC 11.7±34.2. The severity of impact was classified into 3 ranges; low 10~39 g (482 impacts); medium 40~69 g (17 impacts); and high >69 g (2 impacts). There are no significant differences in PLA and HIC (p=0.08, p=0.15), however PRA and PRV show the differences (p<.05) between each of the participants. For the analysis comparing between the soccer games, there are no significant differences in PLA, PRA, PRV and HIC (p=0.11, p=0.13, p=0.14, p=0.05). Conclusion: Our results indicated that there were significant differences between athletes, especially in terms of rotational acceleration, whereas there were significant differences in linear and rotational based variable between each of the soccer games. Although the vast majority of impacts were below 39 g there were 2 potentially dangerous impacts above 69 g. It is important that future research continuous to measure head impact mechanics during soccer to help understand head injury mechanisms to ensure the safety of athletes.

• Economic and Environmental Geology
• /
• v.17 no.3
• /
• pp.163-169
• /
• 1984

A linear inversion of heat flow values using heat production data with reliable value is studied in this work. To evaluate 2-D problem, a thin vertical sheet model is considered. Making use of a relation based on potential theory, a new relation between $q_{rad}$ and $A_0$ is derived. The forward calculations with noise and without noise are shown. The inversion of random search is comparable to that of ridge regression method. The agreements between the computed and best fit after inversion suggest the importance of random search method in the inversion technique.

• Structural Engineering and Mechanics
• /
• v.51 no.2
• /
• pp.299-313
• /
• 2014

In the first part of this paper, the influences of some of crack parameters on natural frequencies of a cracked cantilever Functionally Graded Beam (FGB) are studied. A cantilever beam is modeled using Finite Element Method (FEM) and its natural frequencies are obtained for different conditions of cracks. Then effect of variation of depth and location of cracks on natural frequencies of FGB with single and multiple cracks are investigated. In the second part, two Multi-Layer Feed Forward (MLFF) Artificial Neural Networks (ANNs) are designed for prediction of FGB's Cracks' location and depth. Particle Swarm Optimization (PSO) and Back-Error Propagation (BEP) algorithms are applied for training ANNs. The accuracy of two training methods' results are investigated.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.3 s.192
• /
• pp.117-123
• /
• 2007

This paper describes a three-probe system that can be used to measure the parallelism and straightness of a pair of rails simultaneously. The parallelism is measured using a modified reversal method, while the straightness is measured using a sequential two-point method. The measurement algorithms were analyzed numerically using a pair of functionally defined rails to validate the three-probe system. Tests were also performed on a pair of straightedge rails with a length of 250 mm and a maximum straightness deviation of $0.05{\mu}m$, as certified by the supplier. The experimental results demonstrated that the parallelism-measurement algorithm had a cancellation effect on the probe stage motion error. They also confirmed that the proposed system could measure the slope of a pair of rails about $0.06{\mu}rad$. Therefore, by combining this technique with a sequential differential method to measure the straightness of the rails simultaneously, the surface profiles could be determined accurately and eliminate the stage error. The measured straightness deviation of each straight edge was less than $0.05{\mu}m$, consistent with the certified value.

• International Journal of Knowledge Content Development & Technology
• /
• v.5 no.1
• /
• pp.5-14
• /
• 2015

The Radiological Society of North America (RSNA) is improving reporting practices by developing an online library of clear and consistent report templates. To compare term occurrences in free-text radiology reports and RSNA reporting templates, the Wilcoxon signed-rank test method was applied to investigate how much of the content of conventional narrative reports is covered by the terms included in the RSNA reporting templates. The results show that the RSNA reporting templates cover most terms that appear in actual radiology reports. The Wilcoxon test may be helpful in evaluatingexisting templates and guiding the enhancement of reporting templates.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.401-402
• /
• 2017

넓은 범위의 토크-속도 특성을 가지는 직류기는 소형에서부터 대형까지 다양한 산업분야에서 폭넓게 사용되고 있다. 이러한 직류기 중 영구자석으로 자기장을 형성하는 영구자석 직류기 (Permanent magnet dc motor, PMDC motor)의 제어방식에 대해 비교 분석했다. 가장 대중적으로 사용되고 있는 진폭 변조 방식 (PWM, Pulse Width Modulation)과 벅-부스트 컨버터 (Buck-Boost converter)를 이용한 직류기 제어 방식에 대해 비교했다. PWM 방식은 인버터를 이용하여 펄스폭을 변조하였고, 벅-부스트 컨버터를 이용하는 방식은 스위치의 듀티비를 제어하여 직류 전압의 크기를 조절하였다. 시뮬레이션 결과 벅-부스트 컨버터를 이용한 방식이 PWM 방식보다 5 rad/s 까지 정착 시간은 54.4 % 단축되었지만, 전력 소모는 194 % 증가하는 결과를 얻었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.4
• /
• pp.295-301
• /
• 2016

The out-of-squareness is one of the error sources that affect the positioning accuracy of machine tools and coordinate measuring machines. Laser interferometer is widely used to measure the position and angular errors, and can measure the squareness using an optical square. However, the squareness measurement using the laser interferometer is difficult, as compared to other errors due to complicated optics setup and Abbe's error occurrence. The effect of out-of-squareness mainly appears at the face-diagonal of the movable plane. The diagonal displacements are also affected by the position dependent geometric errors. In this study, the squareness estimation techniques via diagonal displacement measurement using the laser interferometer without an optical square were proposed. For accurate estimation and measurement time reduction, the errors selected from proposed discriminant were measured. Discrepancy between the proposed technique with the laser interferometer (with an optical square) result was $0.6{\mu}rad$.

• Structural Engineering and Mechanics
• /
• v.44 no.2
• /
• pp.139-161
• /
• 2012

In this paper, the static behavior of bi-directional functionally graded (FG) non-uniform thickness circular plate resting on quadratically gradient elastic foundations (Winkler-Pasternak type) subjected to axisymmetric transverse and in-plane shear loads is carried out by using state-space and differential quadrature methods. The governing state equations are derived based on 3D theory of elasticity, and assuming the material properties of the plate except the Poisson's ratio varies continuously throughout the thickness and radius directions in accordance with the exponential and power law distributions. The stresses and displacements distribution are obtained by solving state equations. The effects of foundation stiffnesses, material heterogeneity indices, geometric parameters and loads ratio on the deformation and stress distributions of the FG circular plate are investigated in numerical examples. The results are reported for the first time and the new results can be used as a benchmark solution for future researches.

• Steel and Composite Structures
• /
• v.35 no.1
• /
• pp.77-92
• /
• 2020

The present paper outlined a procedure for geometrically nonlinear dynamic analysis of functionally graded graphene platelets-reinforced (GPLR-FG) nanocomposite cylinder subjected to mechanical shock loading. The governing equation of motion for large deformation problems is derived using meshless local Petrov-Galerkin (MLPG) method based on total lagrangian approach. In the MLPG method, the radial point interpolation technique is employed to construct the shape functions. A micromechanical model based on the Halpin-Tsai model and rule of mixture is used for formulation the nonlinear functionally graded distribution of GPLs in polymer matrix of composites. Energy dissipation in analyses of the structure responding to dynamic loads is considered using the Rayleigh damping. The Newmark-Newton/Raphson method which is an incremental-iterative approach is implemented to solve the nonlinear dynamic equations. The results of the proposed method for homogenous material are compared with the finite element ones. A very good agreement is achieved between the MLPG and FEM with very fine meshing. In addition, the results have demonstrated that the MLPG method is more effective method compared with the FEM for very large deformation problems due to avoiding mesh distortion issues. Finally, the effect of GPLs distribution on strength, stiffness and dynamic characteristics of the cylinder are discussed in details. The obtained results show that the distribution of GPLs changed the mechanical properties, so a classification of different types and volume fraction exponent is established. Indeed by comparing the obtained results, the best compromise of nanocomposite cylinder is determined in terms of mechanical and dynamic properties for different load patterns. All these applications have shown that the present MLPG method is very effective for geometrically nonlinear analyses of GPLR-FG nanocomposite cylinder because of vanishing mesh distortion issue in large deformation problems. In addition, since in proposed method the distributed nodes are used for discretization the problem domain (rather than the meshing), modeling the functionally graded media yields to more accurate results.