• Transactions of Materials Processing
• /
• v.16 no.8
• /
• pp.603-613
• /
• 2007

This paper is concerned with joining of thin metal sheets by single stroke clinching process. This method has been used in sheet metal work as it is a simple process and offers the possibility of joining similar-dissimilar thin sheet metals. Clinching generates a joint by overlapping metal sheets deforming plastically by punching and squeezing sequence. AA 5754 aluminum alloy of 0.5 mm thick sheets have been selected as a modal material and the process has been simulated under different process conditions and the results have been analyzed in terms of the quality of clinch joints which are influenced mainly by tool geometries. The rigid-plastic finite element method is applied to analyses in this paper. Analysis is focused mainly on investigation of deformation and material flow patterns influenced by major geometrical parameters such as die diameter, die depth, groove width, and groove corner radius, respectively. To evaluate the quality of clinch joints, four controlling or evaluation parameters have been chosen and they are bottom, neck thickness of bottom and top sheets, and undercut thickness, respectively. It has been concluded from the simulation results that the die geometries such as die depth and diameters are the most decisive process parameters influencing on the quality of clinch joints, and the bottom thickness is the most important evaluation parameter to determine if the quality of clinch joints satisfies the demand for industrial application.

• Journal of Biomedical Engineering Research
• /
• v.30 no.3
• /
• pp.221-225
• /
• 2009

The purpose of this study was to investigate the biomechanical effects of an application of whole body vibration during strengthening exercise. Every participant performed four weeks exercise program using general leg-press versus vibrating leg-press. Participants did legpress exercise three sets of 25 repetitions with the load of 25 percent of 1RM during first week, three sets of 20 repetitions with 40 percent of 1RM during second week, three sets of 15 repetitions with 60 percents of 1RM during third week, and three sets of 15 repetitions with 80 percent of 1RM during last fourth week. The vibration(25Hz, 5mm) was applied only to the vibration exercise group. A three dimensional virtual lower extremity model for one of subject and virtual leg-press model were generated. The knee extensor muscle forces were analyzed using the virtual model and the knee joint torque(maximum extension torque) was measured using an isokinetic device. Calculated muscle forces were smaller in vibrating leg-press exercise than in general leg-press exercise. An increase of the maximum knee extension joint torque was 2.14 times larger approximately after the four week vibration leg-press exercise program was performed.

• Korean Journal of Metals and Materials
• /
• v.48 no.6
• /
• pp.533-542
• /
• 2010

The specific motivation for joining an Al alloy and Zn-coated steel arises from the need to save fuel consumption by weight reduction and to enhance the durability of vehicle structures in the automobile industry. In this study, the lap joining A6K31 Al alloy (top) and SGARC340 Zn-coated steel (bottom) sheets with a thickness of 1.0 mm and 0.8 mm, respectively, was carried out using the friction stir weld (FSW) technique. The probe of a tool did not contact the surface of the lower Zn-coated steel sheet. The friction stir welding was carried out at rotation speeds of 1500 rpm and travel speeds of 80~200 mm/min. The effects of tool geometry and welding speed on the mechanical properties and the structure of a joint were investigated. The tensile properties for the joints welded with a larger tool were better than those for the joints done with a smaller tool. A good correlation between the tensile load and area of the welded region were observed. The bond strength using a larger tool (M4 and M3) decreased with an increase in welding speed. Most fractures occurred along the interface between the Zn-coated steel and the Al alloy. However, in certain conditions with a lower welding speed, fractures occurred at the A6K31 Al alloy.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.661-669
• /
• 2021

A mechanical stiffener has been mainly applied on a PCB to secure fatigue life of a solder joint of an electronic components in spaceborne electronics by minimizing bending displacement of the PCB. However, it causes an increase of mass and volume of the electronics. The high damping PCB implemented by multi-layered viscoelastic tapes of a previous research was effective for assuring the fatigue life of the solder joint, but it also has a limitation to decrease accommodation efficiency for the components on the PCB. In this study, we proposed high damping PCB with a multi-layered superelastic shape memory alloy stiffener for spatialminimized, light-weighted, high-integrated structure design of the electronics. To investigate the basic characteristics of the proposed PCB, a static load test, a free vibration test were performed. Then, the high damping characteristic and the design effectiveness of the PCB were validated through a random vibration test.

• Journal of dental hygiene science
• /
• v.21 no.1
• /
• pp.63-69
• /
• 2021

Background: This study aimed to identify the role of dental hygienists in exchanges between North and South Korea to lower gaps in the level of dental healthcare between the two countries by conducting a Delphi survey with specialists and identifying alternative policies regarding the utilization of dental hygienists in such exchanges. Methods: Two Delphi surveys were conducted with the participation of nine specialists, and descriptive statistical analyses including mean and standard deviation were performed on the collected data. Results: Among methods of exchange and cooperation regarding oral healthcare under the current North Korean medical system, the issue considered most urgent was the "establishment of oral healthcare infrastructure." The most important short-term strategy was identified as the "selection and formation of partnerships in the field of inter-Korean oral health exchange and cooperation." The mid-term strategy was identified as the "establishment of cooperation in the dental industry, centered on educational cooperation projects." The long-term strategy included "joint R&D projects, oral health surveys, and business development." In order to determine how best to use dental hygienists during inter-Korean exchanges and cooperation, the respondents placed urgency on the "establishment of joint cooperation projects for oral health promotion and early examination and the treatment of dental diseases and planning of community research projects" and "the role of oral health education and media development for residents." Conclusion: Cooperation is necessary regarding the preparation of oral healthcare exchanges that aim to encourage unity between North and South Korea and reduce the gaps between the North and South regarding oral health conditions. Therefore, continuous and reasonable discussions and research are needed regarding the utilization of dental hygienists in such exchanges.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2367-2375
• /
• 2022

In this work, we propose a new mechanistic model for the treatment of helium behaviour at the grain boundaries in oxide nuclear fuel. The model provides a rate-theory description of helium inter-granular behaviour, considering diffusion towards grain edges, trapping in lenticular bubbles, and thermal resolution. It is paired with a rate-theory description of helium intra-granular behaviour that includes diffusion towards grain boundaries, trapping in spherical bubbles, and thermal re-solution. The proposed model has been implemented in the meso-scale software designed for coupling with fuel performance codes SCIANTIX. It is validated against thermal desorption experiments performed on doped UO₂ samples annealed at different temperatures. The overall agreement of the new model with the experimental data is improved, both in terms of integral helium release and of the helium release rate. By considering the contribution of helium at the grain boundaries in the new model, it is possible to represent the kinetics of helium release rate at high temperature. Given the uncertainties involved in the initial conditions for the inter-granular part of the model and the uncertainties associated to some model parameters for which limited lower-length scale information is available, such as the helium diffusivity at the grain boundaries, the results are complemented by a dedicated uncertainty analysis. This assessment demonstrates that the initial conditions, chosen in a reasonable range, have limited impact on the results, and confirms that it is possible to achieve satisfying results using sound values for the uncertain physical parameters.

• Journal of muscle and joint health
• /
• v.5 no.1
• /
• pp.39-56
• /
• 1998

This study was an quasi-experimental study, done to identify factors Influencing the reduction of symptoms in patients with fibromyalgia. The primary purpose of the study was to develop a Self-Help Program suitable for patients with fibromyalgia in Korea. The secondary purpose was to identify the effects of a Self-Help Program which included stretching exercise. This study was carried out between Feb. 24 and July 8, 1997 and patients in the study Included out patient diagnosed with fibromyalgia based on the criteria developed by the American College of Rheumatology(1990) and H, University which is a tertiary patient care clinic for Rheumatism. The experimental group included 38 patients who were residents of Seoul or Kyungi province, and a control group of 38 patients who were residents of other areas. The control patients were matched to the experimental group patients and they were selected considering the number of tender points on the Fibromyalgia Impact Questionnaire score and a score of self-efficacy. The experimental group participated in a Self-Help Program based on the American Arthritis Foundation(1995) guidelines. The program participants participated in a small group which consisted of 12-15 members attending the program once a week, for 6 weeks with each program lasted two to two and a half hours. The stretching exercise was carried out in each patient's home every day following the video tape exercise provided by the researcher, and the researcher provided encouragement and concern to the patients by calling them once a week. The number times the exercise was performed was divided by the number of participants to calculate the percentage of performance and determine the amount of exercise. Self-efficacy was measured by the Self-Efficacy Scale developed by Lorig et al. (1989) for arthritis patients. The degree of pain was converted to scores based on the Visual Analog Scale, the number of tender points was converted to scores based on the criteria of the ACR(1990) and of Yunus. Depression was measured by CES-D and physical disability, sleep disturbance, fatigue, and anxiety of patients with fibromyalgia were measured by the Fibromyalgia Impact Questionnaire. The level of the exercise performance was converted to scores using the number of times the exercise was performed following the video tape prepared by Association of Rheumatology Health Professionals. Data were analyzed by SPSS windows and the results ire described below. 1. The experimental group which participated in the Self-Help Program showed higher efficacy scores than the control group when both groups were analyzed for depression and the number of tender points as common variables(F=9.146, p=.003). 2. The experimental group which participated in the Self-Help Program showed lower scores than the control group, for pain, the number of tender points, depression, physical disability, fatigue, sleep disturbance and anxiety. These symptoms of fibromyalgia can all be seen to have subsided(F=9.483, p=.003 : F=32.680, p=.001 ; F=11.104, p=.001, F=5.344 : p=.024, F=7.630 : P=.007, F=15.6512, p=.003 : F= 7.5412, p=.008). 3. In the experimental group, the self-efficacy score for the first three weeks showed a positive correlation with the exercise-performance score for four to six weeks (r=.387, p=.043). 4. In the experimental group, the relationship between the level of exercise-performance and the reduction of symptoms showed a significant correlation only to physical disability(r= -.500, p=.001). 5. In the experimental group, the relationship between the self-efficacy score and pain, the number of tender points, depression, physical disability, fatigue, sleep disturbance and anxiety score showed inverse correlations and thus, a reduction of symptoms occured when the self-efficacy score increased(r=-.325, p=.004 ; r= -.253, p=.027, r=-.452, p=.001 : r=-.434, p=.001 ; r=-.316, p=.005 ; r=-.460, p=.001 ; r=-.397, p=.014). Therefore, self-efficacy improved following the Self-Help Program including the stretching exercise. It was also found that physical symptoms (pain, number of tender points, level physical disability) and psychological symptoms (depression, fatigue, sleep disturbance, anxiety) were reduced. Moreover, It was found that the higher the self-efficacy, the the higher the degree of achievement of goals set for the stretching exercises. In addition, the level of exercise-performance influenced the level of physical disability, one of the symptoms of fibromyalgia. Accordingly, the conclusions from this study are that exercise-performance and the reduction of symptoms is achieved through promotion of self-efficacy. Therefore, it is proposed that are the Self-Help Program including stretching exercises is an appropriate nursing intervention for the reduction of symptoms of fibromyalgia.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.648-653
• /
• 2012

The government announced a strategy for the world's leading science and technology from 2008 to 2012. South Korea government has committed 1.3 percent for joint research projects research among total budget. The goal of this paper is to find Strategy for international technological participating particularly EU. This paper consists of six chapters. Chapter 2 the status of international collaborative research participation of korean companies. Chapter 3 is the theoretical basic. Chapter 4 is research methods. Chapter 5 of this paper is presented EUREKA collaboration as core of this paper. Chapter 6 hat conclusions and policy proposals.

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.106-112
• /
• 2012

This study was carried out to investigate the effect of bonding temperature and holding time on microstructure and mechanical properties in brazing joints of Ni-base superalloy using MBF-30 (Ni-4.5Si-3.2B [wt.%]). The heating rate was $20^{\circ}C$/min to the bonding temperatures $1050^{\circ}C$, $1070^{\circ}C$, $1090^{\circ}C$ under high vacuum condition. The holding times were 100s, 400s, 900s and 1600s. $Ni_3B$ phases and proeutectic Ni were observed in the interlayer of Ni-201. Then, Ni3B and Ni3Si were found in the middle region of brazing joint. Cr-boride phase appeared in the interlayer of Inconel-625. Tensile strength and elongation were decreased at $1050^{\circ}C$-1600s, $1070^{\circ}C$-900s and $1090^{\circ}C$-400s. After observation the fracture specimens, There was Ni3B which is very brittle phase in the grain boundary of Ni201.

• Journal of Welding and Joining
• /
• v.23 no.1
• /
• pp.69-76
• /
• 2005

Recently, application of arc welding to galvanized carbon steel sheet is on the increasing Ould in the fields of automobile and construction industries. In arc welding process, zinc is evaporated in weld pool, even under the appropriate welding condition and produce blowhole and/or pit. Zinc gas cause instability of arc and increase spatter and fume. This research is purposed to minimize the heat-input and the formation of porosities in the welded joint of the galvanized carbon steel sheet using variable polarity AC wave pulse MIG welding system. An appropriate welding condition which showed low spatter and good bead appearance was acquired by applying the AC pulse MIG welding machine to DC duplicated MIG welding with the solid wire. When oxygen gas was added to shield gas of MIG welding for galvanized steel sheet, arc length was increased and arc stability was improved. In the AC duplicated welding, the loss of galvanized layer was decreased as the amount of heat-input was decreased when the EN ratio was increased under the condition that average welding current was evenly set.