• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.2
• /
• pp.47-53
• /
• 1984

Breakdown characteristics, specifically, soft breakdown phenomena of the PN junction isolation were studied in terms of their dependence on the mask misaliglment and the amount of process-related defects. Varying the distance between the buried layer and the isolation by intentional misalignment of the isolation masts had no effects on the soft breakdown phenomena except for the change of the breakdown voltage. The soft breakdown phenomena, as characterized as a state of excessive reverse current below the breakdown voltage, were found out to result mainly from the oxidation-induced stacking faults (OSF) introduced during the fabrication process.

• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.31-37
• /
• 2013

Mobile ad hoc networks (MANET) refers to a network designed for special applications for which it is difficult to use a backbone network. In MANETs, applications are mostly involved with sensitive and secret information. Since MANET assumes a trusted environment for routing, security is a major issue. In this paper we analyze the vulnerabilities of a pro-active routing protocol called optimized link state routing (OLSR) against a specific type of denial-of-service (DOS) attack called node isolation attack. Analyzing the attack, we propose a mechanism called enhanced OLSR (EOLSR) protocol which is a trust based technique to secure the OLSR nodes against the attack. Our technique is capable of finding whether a node is advertising correct topology information or not by verifying its Hello packets, thus detecting node isolation attacks. The experiment results show that our protocol is able to achieve routing security with 45% increase in packet delivery ratio and 44% reduction in packet loss rate when compared to standard OLSR under node isolation attack. Our technique is light weight because it doesn't involve high computational complexity for securing the network.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.5
• /
• pp.146-153
• /
• 2010

Urban development typically results in many species being confined to small, isolated and degraded habitat fragments. Fragment size and isolation underpin many studies of modified landscape to prevent biodiversity loss. However, habitat characteristics such as vegetation structure and edge effects are less frequently incorporated in planning. The relative influence of biogeographic (e.g. size, isolation) and vegetation parameters on assemblages is poorly understood, but critical for conservation management. In this study, the relative importance of biogeographic and vegetation parameters in explaining the diversity of forest-interior dwelling birds in forest fragments in Chungcheong Province Area. Fragment size and vegetation characteristics were consistently important predictors of bird diversity. Forestinterior bird richness was influenced by fragment size (0.437), wood age (0.332), wood diameter (0.068), and patch shape (-0.079). To preserve bird diversity of Chungcheong Province Area, it is important to consider differing responses of bird diversity to landscape change, move beyond a focus primarily on spatial attributes (size, isolation) to recognize that landscape change also has profound effects on habitat composition and quality. The result is very useful for long-term aspect of biodiversity conservation plan in regional scale.

• Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.259-263
• /
• 2012

To isolate an alginate-degrading bacterium, we conducted a single colony isolation using a solid medium containing alginate as the sole carbon source. A marine bacterium Y-4 capable of degrading alginate was isolated from seawater. The strain was identified to be Pseudoalteromonas sp., based on morphological, biochemical, 16S rDNA homology, and phylogenetic analyses. Moreover, Pseudoalteromonas sp. Y-4 exhibited alginate lyase activity in the presence of 4% alginate even though many known alginate-degrading bacteria degrade in the range of 0.5-1% alginate. The optimum culture conditions for the Y-4 strain were 2% alginate, pH 8.0, and 3% NaCl at $30^{\circ}C$. The highest alginate lyase activity was also observed under the same conditions. To our knowledge, this is the first reported isolation of a marine bacterium degrading high concentrations of alginate.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.351-358
• /
• 1999

The base-isolation technology is to set up LRB between the base of a building and the ground to protect the building from seismic force. As Korea belongs to the region of moderate or weak seismicity it is more resonable to apply the base-isolation technology of LRB in the field of the response reduction of equipments under machine or transportation vibrations than in the field of seismic response reduction of buildings, In this paper small-scale LRB's designed for the response reduction of equipments are manufactured and tested for thier performance. The shaking table test is conducted to analyze the characteristics of LRB such as the variation of natural frequencies damping ratios and equipments responses.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.1
• /
• pp.1-4
• /
• 2007

This paper discusses two approaches for pre-polishing optimization of oxide chemical mechanical planarization (CMP) that can be used as alternatives to the commonly applied dummy structure insertion in shallow trench isolation (STI) and replacement gate (RG) technologies: reverse nitride masking (RNM) and oxide etchback (OEB). Wafers have been produced using each optimization technique and CMP tests have been performed. Dishing, erosion and global planarity have been investigated with the help of conductive atomic force microscopy (C-AFM). The results demonstrate the effectiveness of both techniques which yield excellent planarity without dummy structure related performance degradation due to capacitive coupling.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2000.10a
• /
• pp.109-117
• /
• 2000

Bacterial community structure composing enhanced biological phosphorus removal (EBPR) activated sludge was analyzed phylogenetically by cloning 165 rDNA after direct DNA extraction. Then, this result was compared with 165 rDNA sequences of randomly isolated bacterial species. The results clearly showed that there are no coincidence between the sequences retrieved directly from activated sludge and those of isolated strains, suggesting that many important bacteria are hidden in activated sludge because of the difficulty in isolation and culture of them.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.6
• /
• pp.824-831
• /
• 2019

For effective development in consideration of the maintainability of the weapon system, it is necessary to understand whether the maintainability design requirements are satisfied at the early phase of development. This requires the application of an early design phase maintainability prediction process to provide opportunities for improvement. By defining the ambiguity group definition, fault isolation level, fault isolation probability, and countermeasures for faults, it was possible to predict early phase development. The MTTR of the initial design phase applying Procedure V to the artillery system was 3.46H, which is about 16 % higher than 2.98H, the MTTR using Procedure II. This is a result of system design ambiguity that has not been specified in the early phase of development.

• Smart Structures and Systems
• /
• v.31 no.5
• /
• pp.531-543
• /
• 2023

Base isolation is one of the most widely implemented and well-known technique to reduce structural vibration and damages during an earthquake. However, while the base-isolated structure reduces storey drift significantly, it also increases the base drifts causing many practical problems. This study proposes the use of Shape Memory Alloys (SMA) wires for the reduction in base drift while controlling the overall structure vibrations. A multi-degree-of-freedom (MDOF) structure along with base isolators and Shape-Memory-Alloys (SMA) wires in diagonal is tested experimentally and analytically. The isolation bearing considered in this study consists of laminates of steel and silicon rubber. The performance of the proposed structure is evaluated and studied under different loadings including harmonic loading and seismic excitation. To assess the seismic performance of the proposed structure, shake table tests are conducted on base-isolated MDOF frame structure incorporating SMA wires, which is subjected to incremental harmonic and historic seismic loadings. Root mean square acceleration, displacement and drift are analyzed and discussed in detail for each story. To better understand the structure response, the percentage reduction of displacement is also determined for each story. The result shows that the reduction in the response of the proposed structure is much better than conventional base-isolated structure.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1237-1251
• /
• 2016

Although the horizontal component of an earthquake response can be significantly reduced through the use of conventional seismic isolators, the vertical component of excitation is still transmitted directly into the structure. Records from instrumented structures, and some recent tests and analyses have actually seen increases in vertical responses in base isolated structures under the combined effects of horizontal and vertical ground motions. This issue becomes a great concern to facilities such as a Nuclear Power Plants (NPP), with specialized equipment and machinery that is not only expensive, but critical to safe operation. As such, there is considerable interest worldwide in vertical and three-dimensional (3D) isolation systems. This paper examines several vertical and 3D isolation systems that have been proposed and their potential application to modern nuclear facilities. In particular, a series of case study analyses of a modern NPP model are performed to examine the benefits and challenges associated with 3D isolation compared with horizontal isolation. It was found that compared with the general horizontal isolators, isolators that have vertical frequencies of no more than 3 Hz can effectively reduce the vertical in-structure responses for the studied NPP model. Among the studied cases, the case that has a vertical isolation frequency of 3 Hz is the one that can keep the horizontal period of the isolators as the first period while having the most flexible vertical isolator properties. When the vertical frequency of isolators reduces to 1 Hz, the rocking effect is obvious and rocking restraining devices are necessary.