• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2055-2067
• /
• 1997

Values of process parameters in sheet metal forming can be estimated by various one-step inverse methods. One-step inverse methods based on deformation theory, however, cause some amount of error. The amount of error is generally increased as the deformation path becomes more complex. As a remedy, a new three dimensional multi-step inverse method is introduced for optimum design of blank shapes and strain distributions from desired final shapes. The approach extends a one-step inverse method to a multi-step inverse method in order to reduce the amount of error. The algorithm developed is applied to square cup drawing to confirm its validity by demonstrating reasonably accurate numerical results. Rapid calculation with this algorithm enables easy determination of an initial blank of sheet metal forming.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.29-36
• /
• 2004

In this paper, a study of damage detection for 2-Dimensional Truss Structures using the parametric projection filter theory is presented. Many researchers are interested in inverse problem and one of solution procedures for inverse problems that are very effective is the approach using the filtering algorithm in conjunction with numerical solution methods. In filtering algorithm, the Kalman filtering algorithm is well known and have been applied to many kind of inverse problems. In this paper, the Parametric projection filtering in conjunction with structural analysis is applied to the identification of damages in 2-D truss structures. The natural frequency and modes of damaged truss model are adopted as the measurement data. The effectiveness of proposed method is verified through the numerical examples.

• 한국지반공학회지:지반
• /
• 제10권4호
• /
• pp.29-38
• /
• 1994

공내하향 탄성파시험(downhole seismic tests) 결과를 해석하는 새로운 방법을 소개하였다. 이 방법은 역산이론(inverse thery)에 근거 하며, 직접산출법(direct measurements)과 간접산 출법(indirect measurements)과 같은 기존 방법으로는 불가능한 정도의 자세한 탄성파 속도 프로파일(profile)을 얻을 수 있다. 더욱이, 이 방법은 속도 프로파일의 신뢰도를 평가 할 수 있는 장점이 있다. 지반구조가 서로 다른 5개소의 현장에서 이 방법의 적용성을 검증하였다.

• 산업기술연구
• /
• 제21권A호
• /
• pp.317-327
• /
• 2001

For soils with high void ratios, the inverse method of utilizing results obtained from centrifuge model test was used to find the constitutive relation of effective stress - void ratio - permeability whereas conventional oedometer test and constant rate of strain consolidation test were also used to fine its relation at ranges of relatively low void ratio. Results of column test about settlement of interface and pore pressure and distribution with time were compared with numerically estimated values to confirm such a constitutive relation as obtained from the inverse method. Consolidational settlement in dredged and reclaimed ground, where the consolidation was in progress, was predicted by using the numerical technique implemented with the finite strain consolidation theory.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.179-182
• /
• 1997

One-step inverse methods based on deformation theory causes some amount of error. The amount of error is generally increased as the deformation path is more complex. As a remedy, a new three dimensional multi-step inverse method is introduced for optimum design of blank shapes and strain distributions from desired final shapes. The approach extends a one-step inverse method to a multi-step inverse method in order to reduce the amount of error. The algorithm developed is applied to square cup drawing to confirm its validity by demonstrating reasonably accurate numerical results.

• 대한수학회지
• /
• 제58권4호
• /
• pp.819-833
• /
• 2021

Hawkes process is a self-exciting simple point process with clustering effect whose jump rate depends on its entire past history and has been widely applied in insurance, finance, queueing theory, statistics, and many other fields. Seol [27] proposed the inverse Markovian Hawkes processes and studied some asymptotic behaviors. In this paper, we consider an extended inverse Markovian Hawkes process which combines a Markovian Hawkes process and inverse Markovian Hawkes process with features of several existing models of self-exciting processes. We study the limit theorems for an extended inverse Markovian Hawkes process. In particular, we obtain a law of large number and central limit theorems.

• 대한수학회보
• /
• 제35권4호
• /
• pp.791-807
• /
• 1998

The purpose of this paper is to construct a ring with unity under the derived cup product on the cochain groups of the inverse system and an isomorphism which is useful as the computation of a derived group by deleting the suitable terms in the directed set D. Moreover we apply these results to the K-theory.

• 대한전자공학회논문지
• /
• 제23권4호
• /
• pp.455-459
• /
• 1986

A large set of linear equations which arise in many applications, such as in digital signal processing, image filtering, estimation theory, numerical analysis, etc. involve the problem of a tridiagonal matrix. In this paper, the determinant, eigenvalue and inverse matrix of a tridiagoanl matrix are analytically evaluated.

• 대한수학회논문집
• /
• 제24권3호
• /
• pp.467-479
• /
• 2009

This paper ultimately aims to develop noninvasive techniques to identify the inside of a given electrical network. Based on the theory of the partial differentiation equations and mathematical modeling, this paper devises the algorithms to find the locations of possible abnormalities. To ensure the certainty of the algorithms, this study restricted the forms of the network and the number of abnormalities, rendering it easy to prove the uniqueness of the position of the abnormalities.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1470-1474
• /
• 2004

This paper addresses the development of inverse compensation techniques for a class of ferromagnetic transducers including magnetostrictive actuators. In this work, hysteresis is modeled through the domain wall theory originally proposed by Jiles and Atherton[1]. This model is based on the quantification of the energy required to translate domain walls pinned at inclusions in the material with the magnetization at a given field level specified through the solution of an ordinary differential equation. A complementary differential equation is then employed to compute the inverse which can be used to compensate for hysteresis and nonlinear dynamics in control design.