• Textile Coloration and Finishing
• /
• v.8 no.4
• /
• pp.4-10
• /
• 1996

Poly(4-morphonylphosphonate of bisphenol A) (PMPB) was synthesized by the interfacial polymerization of phosphonic dichloride, 4-morphonyl (PDCM) and bisphenol A in an aqueous-organic biphasic system. Synthesized polymer was found to be PMPB by using EA, FT-IR and $^{1}$H-NMR. Prepared PMPB had different values of molecular weight depending on the solubility in the organic phase: the higher the solubility, the higher the molecular weight. PMPB is amorphous and its thermal decomposition temperature is about 35$0^{\circ}C$. PMPB is congenial to application to polypropylene by blending because of no reaction with polypropylene.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.60-61
• /
• 1994

복합막은 기존의 비대칭막에 비해서 극히 얇은 표면층을 형성할 수 있다. 이러한 복합막은 배제율도 우수할 뿐만아니라 투과속도 또한 매우 큰 특징을 가지고 있으며, 해수의 담수화를 비롯하여 초순수 제조 등 각종 산업분야에서 많이 응용되고 있다. 우수한 분리막을 제조하기 위해서는 막의 표면층을 보다 더 치밀하고 얇게 형성할 수 있어야 한다. 이렇게 하기 위해서는 지지막 또한 매우 중요한 요인으로 작용한다. 표면층이 치밀하고, 가능한 한 porosity가 큰 지지막을 제조해야한다. 따라서 본 연구에서는 고분자 물질로 Polyethersulfone을 사용하여 지지막을 만들었다. 이 지지막위에 계면중합법으로 NF/RO용 복합막을 제조하였다. 높은 투과 속도 및 염의 배제율이 우수한 복합막을 제조하기 위해서 먼저 Polymer 농도, 첨가제 종류및 농도 등에 의한 각종 제막조건에 따른 지지막의 성능을 조사하였다. 여기에 Monomer 농도를 변화시켜서 계면중합으로 복합막을 제조하여 그 성능 변화를 측정하였다.

• YAKHAK HOEJI
• /
• v.28 no.4
• /
• pp.217-221
• /
• 1984

Nylon microcapsules of sodium salicylate containing three different matrixes, acacia, gelatin and formalized gelatin, were prepared by interfacial polymerization and the effect of the matrix on the dissolution rate of sodium salicylate from its nylon microcapsule was investigated. The microcapsules were spherical and their particle diameter increased in proportion to the amount of matrix. The surface was different from each other according to the kind and the amount of matrix when observed by the scanning electron microscopy. The dissolution rate of sodium salicylate from its microcapsules was decreased by increase of the amount of matrix and the formalized gelatin most decreased the dissolution rate of drugs.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.2
• /
• pp.111-116
• /
• 1991

Dextromethorphan HBr (DMP HBr) ion exchange albumin microcapsules were prepared by the interfacial polymerization method. The incorporation of drugs in empty albumin microcapsules was more increased in case of glutaraldehyde (GA) and formaldehyde (FA) than terephthaloyl chloride (TC) as a cross linking agent. The amount of DMP HBr incorporated into empty albumin micorcapsules was augemented with increasing DMP HBr concentration and the amount of empty microcapsules in the incorporation medium. Increasing the salt concentration in the release medium, the release rate and the DMP HBr amount released from microcapsules were increased. The release rates of DMP HBr from microcapsules retarded considerably compared with DMP HBr powder.

• Textile Coloration and Finishing
• /
• v.19 no.5
• /
• pp.30-36
• /
• 2007

Cypermethrin-containing polyurea microcapsules were prepared by interfacial polymerization using aromatic 2,4-toluene diisocyanate(TDI) and Ethylene diamine(EDA) as wall forming materials. The effects of the protective colloids of polyvinylalcohol(PVA) and gelatin were investigated through experimentation. The mean size of the polyurea microcapsules was smaller and the surface morphology of the PVA was much smoother than gelatin. In addition the release behavior was much more controlled and better sustained. As the concentration of protective colloid increased, the wall membrane of the polyurea microcapsules became more stable, the thermal stability of the wall membrane increased, the mean particle size became smaller, and the particle distribution was more uniform. The release behavior of the core material changed according to the concentration. As the gelatin concentration was increased, a more controlled and sustained release behavior was observed. However, in the case of PVA, the increase of PVA concentration lead to a more rapid release rate.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.52-71
• /
• 2018

RO membranes, the core elements for RO process formed using polyamide, have found prominent space in membrane technology. RO membranes with better application perspective could be achieved by precise controlling the kinetics of IP reaction and surface modification strategy. Despite huge progresses, great challenges still exist in trade-off between flux, rejections and fouling. More works are necessary to enhance the performance and stability of RO membranes via surface modification. Further insights into the use of natural monomers are necessary. It is anticipated that this article can provide clues for further in-depth evaluation and research in exploring more advanced RO membranes.

• Composites Research
• /
• v.30 no.2
• /
• pp.138-144
• /
• 2017

Damage sensing of polymer composite films consisting of poly(dicyclopentadiene) p-DCPD and carbon nanotube (CNT) was studied experimentally. Only up to 1st ring-opening polymerization occurred with the addition of CNT, which made the modified film electrically conductive, while interfering with polymerization. The interfacial adhesion of composite films with varying CNT concentration was evaluated by measuring the wettability using the static contact angle method. 0.5 wt% CNT/p-DCPD was determined to be the optimal condition via electrical dispersion method and tensile test. Dynamic fatigue test was conducted to evaluate the durability of the films by measuring the change in electrical resistance. For the initial three cycles, the change in electrical resistance pattern was similar to the tensile stress-strain curve. The CNT/p-DCPD film was attached to an epoxy matrix to demonstrate its utilization as a sensor for fracture behavior. At the onset of epoxy fracture, electrical resistance showed a drastic increase, which indicated adhesive fracture between sensor and matrix. It leads to prediction of crack and fracture of matrix.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.456-470
• /
• 2013

Hollow-fiber membranes, is one of the new technologies that is growing rapidly in the past few decades. In addition, separation membranes using polymer materials, have attracted attentions in various fields including gas separation, fuel cells, water treatment, wastewater treatment, and organic separation. Nanofiltration (NF) membranes having the separation characteristics in the intermediate range between ultrafiltration and reverse osmosis (RO) membranes for liquid separation, with relatively low investment cost and operating pressure lower than that of RO membranes, have high permeance and rejection performance of multivalent ions as well as organic compounds of molecular weight between $200{\sim}1000gmol^{-1}$. In this paper, we would like to review the research trends on the various structure control and characterization of NF hollow fiber membranes with respect to materials and the methods of preparation (phase inversion method and interfacial polymerization method). Currently, most of NF membranes have been manufactured by plate and frame types or spiral wound types. But hollow fiber types have delayed in commercial products, because of the weak strength when to produce on the basis of the existing materials, therefore the development of new materials or improvement of existing materials will be needed. If improving manufacturing technology is available, hollow fiber types will replace spiral wound types and gradually show a higher market share.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2014

To prepare the hollow fiber nanofiltration composite membranes, the poly(vinylidene fluoride) (PVDF) membrane was hydrophilized with $K_2Cr_2OH$ and $KMnO_4$ aqueous solutions. And then the composite membrane was synthesized on that membrane surfaces using interfacial polymerization with piperazine (PIP) and trimesoyl chloride (TMC). The resulting membranes were characterized in terms of the rejection and flux for NaCl, $CaSO_4$, $MgCl_2$ 100 ppm solution and 300 ppm of NaCl and $CaSO_4$ mixed solution by varying the coating time, drying time, and the concentration of the coating materials. As a result, the higher rejections were shown for $K_2Cr_2OH$ solutionas a hydrophilization material, and the flux was enhanced while the rejection reduced as the hydrophilization time is longer. Also, the rejection increased and the flux reduced as the concentrations of triethyl amine (TEA) and sodium lauryl sulfate (SLS) were higher. Typically, the rejection 50% and flux 40 LMH for NaCl 100 ppm solution, and the rejection 55% and flux 48 LMH for $CaSO_4$ 100 ppm solution were obtained for the PVDF hollow fiber composite membrane prepared with the conditions of PIP 2 wt% (Triethyl amine (TEA) 7 wt%, SLS 20 wt% mixed solution against PIP concentration) and TMC 0.1 wt%.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.427-438
• /
• 2023

In this study, in order to improve the performance of the reverse osmosis membrane with high water flux and high salt rejection, a study was conducted on the evaluation of characteristics according to the curing temperature and time during various additives and interfacial polymerization. The morphology of the membrane with no additives and the membrane with additives both showed a "rigid-and-valley" structure, confirming that the polyamide layer was successfully polymerized on the surface of the porous support layer. In addition, the additive of 2-Ethyl-1,3-hexanediol (EHD) had improved hydrophilicity and water flux, which was confirmed by measuring the contact angle. Finally, a highly permeable TFC membrane with NaCl and MgSO₄ salt rejection of 97.78% and 98.7% and a high water flux of 3.31 L/(m²⋅h⋅bar) was prepared.