• 한국멀티미디어학회논문지
• /
• 제15권11호
• /
• pp.1330-1340
• /
• 2012

본 논문에서는 심음신호를 이용해 강한 심 잡음이 나타나는 심장판막협착 영역을 검출하는 새로운 알고리듬을 제안하였다. 심음의 주성분을 찾거나 심 잡음을 제거하기 위한 지금까지의 많은 연구들은 대동맥판막협착증이나 승모판막협착증과 같이 강한 심 잡음이 나타나는 비정상 심음의 경우, 강한 심 잡음으로 인해 좋은 결과를 보이지 못하였다. 본 논문에서는 구간 잡음강도함수를 이용한 잡음 검출 알고리듬을 제안하였다. 제안한 구간 잡음 강도 함수는 심음 신호에서 제 1심음과 제 2심음을 검출하여, 이를 이용한 심음 구간을 설정한 후 구간 자기상관변화량을 이용하여 도출할 수 있다. 제안한 구간 잡음강도함수를 이용하여 심 잡음의 강도를 판단하고 심 잡음 유무를 검출하였다. 제안한 알고리듬으로 실험한 결과, 심장판막협착 영역 검출에서 기존의 연구보다 뛰어난 성능을 가지는 것을 확인하였다.

• Physical Therapy Rehabilitation Science
• /
• 제11권1호
• /
• pp.78-87
• /
• 2022

Objective: The purpose of this study was to investigate the effect of high-intensity complex exercise program using whole-body vibration (WBV) and respiratory resistance on pain and dysfunction, psychosocial level, balance ability, and pulmonary function in low back pain (LBP) patients with high obesity. Design: A randomized controlled trial Methods: A total of 44 LBP patients withhigh obesity (body mass index, BMI≥30kg/m²) were randomly assigned to an experimental group (n=22) and a control group (n=22). Both groups underwent a lumbar stabilization exercise program. In addition, the experimental group implemented the high-intensity complex exercise program combined with WBV and respiratory resistance. In order to compare the effects depending on the intervention methods, numeric pain rating scale (NRPS), Roland-Morris disability questionnaire (RMDQ), fear-avoidance beliefs questionnaire (FABQ), balance ability, and pulmonary function were used for measurement. Results: Both groups showed significant differences in NRPS, RMDQ, FABQ, balance ability before and after intervention (p<0.05). In addition, the experimental groupshowed significant difference in the amount of change in RMDQ, balance ability and pulmonary function values than the control group (p<0.05). Conclusions: High-intensity complex exercise program using WBV and respiratory resistance has been proven to be an effective and clinically useful method to decrease dysfunction, increase balance ablilty, and pulmonary function for LBP patients with high obesity.

• Journal of Information Technology Applications and Management
• /
• 제25권2호
• /
• pp.109-116
• /
• 2018

In this study, we was compared the reliability performance of the software reliability model, which applied the Goel-Okumoto model developed using the exponential distribution, to the logarithmic function modifying the intensity function and the Rayleigh form. As a result, the log-type model is relatively smaller in the mean squared error compared to the Rayleigh model and the Goel-Okumoto model. The logarithmic model is more efficient because of the determination coefficient is relatively higher than the Goel-Okumoto model. The estimated determination coefficient of the proposed model was estimated to be more than 80% which is a useful model in the field of software reliability. Reliability has been shown to be relatively higher in the log-type model than the Rayleigh model and the Goel-Okumoto model as the mission time has elapsed. Through this study, software designer and users can identify the software failure characteristics using mean square error, decision coefficient. The confidence interval can be used as a basic guideline when applying the intensity function that reflects the characteristics of the lifetime distribution.

• International Journal of Quality Innovation
• /
• 제5권1호
• /
• pp.1-9
• /
• 2004

The nonhomogeneous poisson process (NHPP) is often used to model repairable systems that are subject to a minimal repair strategy, with negligible repair times. In this situation, the system can be characterized by its intensity function. There have been many NHPP models according to intensity functions. However, the intensity function of system in use can be changed because of repair or its aging. We consider the single change point model as the modification of the power law process. The shape parameter of its intensity function is changed before and after the change point. We detect the presence of the change point using Bayesian methodology. Some numerical results are also presented.

• Structural Engineering and Mechanics
• /
• 제3권6호
• /
• pp.541-553
• /
• 1995

The determination of the stress intensity factors is investigated by using the surface integral defined around the crack tip of the structure. In this work, the integral method is derived naturally from the standard path integral J. But the use of the surface integral is also extended to the case where body forces act. Computer program for obtaining the stress intensity factors $K_I$ and $K_{II}$ is developed, which prepares input variables from the result of the conventional finite element analysis. This paper provides a parabolic smooth curve function. By the use of the function and conventional element meshes in which the aspect ratio (element length at the crack tip/crack length) is about 25 percent, relatively accurate $K_I$ and K_{II}$ values can be obtained for the outer integral radius ranging from 1/3 to 1 of the crack length and for inner one zero.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.123-128
• /
• 2000

A cracked-plate with a patch bonded on one side is treated with a crack-bridging model: assuming continuous distribution of springs acting between crack surfaces. the approximate weight function was introduced to obtain the stress intensity factor of patched crack subjected to residual stress or non-uniform stress. The stress intensity factors for the partially patched crack within finite plate or the patched crack initiated from a notch were successfully obtained by numerical calculation.

• Computers and Concrete
• /
• 제16권5호
• /
• pp.723-740
• /
• 2015

In this study, the seismic performance of skewed highway bridges has been assessed by using fragility function methodology. Incremental Dynamic Analysis (IDA) has been used to prepare complete information about the different damage states of a 30 degree skewed highway bridge. A three dimensional model of a skewed highway bridge is presented and incremental dynamic analysis has been applied. The details of the full nonlinear procedures have also been presented. Different spectral intensity measures are studied and the effects of the period on the fragility curves are shown in different figures. The efficiency, practicality and proficiency of these different spectral intensity measures are compared. A suite of 20 earthquake ground motions are considered for nonlinear time history analysis. It has been shown that, considering different intensity measures (IM) leads us to overestimate or low estimate the damage probability which has been discussed completely.

• 생명과학회지
• /
• 제26권1호
• /
• pp.129-139
• /
• 2016

운동은 중추와 말초의 각종 성장인자(BDNF, IGF-1, VEGF)들의 상호작용에 의해 뇌신경가소성을 증진시키고 인지기능을 향상시킨다. 지금까지 저·중강도 지속성 유산소 운동의 효과를 검증하는 선행연구가 주로 이루어졌기 때문에 고강도 운동에 따른 뇌신경성장인자의 발현 및 인지기능 개선 효과에 대한 연구는 미흡한 실정이다. 하지만 최근의 과학적 증거들은 고강도 인터벌 운동이 시간 효율성, 안전성, 심폐지구력 개선 및 체중 감소에 효과적임을 암시하고 있으며, 미스포츠의학회(ACSM)에서 권장하는 일반인을 위한 운동지침에서도 무리가 되지 않는 수준에서 고강도 인터벌 운동 수행을 강조하고 있다. 특히 최근에 발표된 선행 연구에서 고강도 인터벌 운동은 말초조직과 뇌에서의 BDNF, IGF-1, VEGF의 발현을 증가시키고 그로 인한 인지기능 발달에 기여한다는 것을 보고하였으며, 관련된 유력한 생리학적 기전으로 고강도 인터벌 운동으로 인한 뇌의 저산소화와 뇌신경대사의 부가적인 에너지원이 될 수 있는 젖산 이용성 증가가 대두되고 있다. 따라서 향후 저산소화 및 젖산 이용성 증가에 따른 뇌신경성장인자 발현 개선에 어떤 분자생물학적 기전이 관여하는지를 탐구할 필요가 있으며, 또한 동일한 운동량을 가진 저·중강도 지속성 유산소 운동과의 비교 연구를 통해 뇌신경성장인자의 발현 및 인지기능 개선에 있어 고강도 인터벌 운동의 우수성을 입증하는 연구가 요구된다.

• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1229-1242
• /
• 1995

The thermal shock stress intensity factors of semi-elliptical surface crack in finite plate and the stress intensity fractors of embedded elliptical crack in turbine rotor is determined by means of Vainshtok weight function method. In case of semi-elliptical surface crack, the solution is compared with previous solution. The stress intensity factor for embedded elliptical crack in turbine rotor loaded by centrifugal and thermal loading is also determined. In this case, the value of stress intensity factor is larger at crack contour near internal radius surface and is almost constant at the crack contour farther from internal radius surface.

• 한국소음진동공학회논문집
• /
• 제11권4호
• /
• pp.22-30
• /
• 2001

In this paper, active control of vibrational intensity at a reference point in an infinite, elastic plate was discussed. The plate is excised harmonically by a vibrating source, which has a vertical point force. The optimal condition of controller was investigated to minimize the vibrational intensity being transmitted from the vibrating source to a reference point. Hence the method of feedforward control was employed for the control strategy and then the cost function was evaluated to find the optimal control force. Three types of control force (Vertical force, Moment, and Coupling force (a set of vertical force and moment) ) and controller's positions were examined to define the optimal condition of the controller. The vibrational intensity at a reference point was found to be reduced down to a zero level, compared with the uncontrolled case. Especially maximum reduction of vibrational intensity was achieved when the controller was collinearly positioned between a vibrating source and a reference point.