• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.74-83
• /
• 2011

The high-pass transportation information system directly collects section information by using probe cars and therefore can offer more reliable information to drivers. However, because the running condition and features of probe cars and statistical processing methods affect the reliability of the information and particularly because the section travel time is greatly influenced by whether there has been delay by signals on urban roads or not, there can be much deviation among the collected individual probe data. Accordingly, researches in multilateral directions are necessary in order to enhance the credibility of the section information. Yet, the precedent studies related to high-pass information provision have been conducted on the highway sections with the feature of continuous flow, which has a limit to be applied to the urban roads with the transportational feature of an interrupted flow. Therefore, this research aims at analyzing the features of high-pass transportation data on urban roads and finding a proper processing method. When the characteristics of the high-pass data on urban roads collected from RSE were analyzed by using a time-space diagram, the collected data was proved to have a certain pattern according to the arriving cars' waiting for signals with the period of the signaling cycle of the finish node. Moreover, the number of waiting for signals and the time of waiting caused the deviation in the collected data, and it was bigger in traffic jam. The analysis result showed that it was because the increased number of waiting for signals in traffic jam caused the deviation to be offset partially. The analysis result shows that it is appropriate to use the mean of this collected data of high-pass on urban roads as its representative value to reflect the transportational features by waiting for signals, and the standard of judgment of delay and congestion needs to be changed depending on the features of signals and roads. The results of this research are expected to be the foundation stone to improve the reliability of high-pass information on urban roads.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.53-73
• /
• 2023

Although it is mandatory to wear a seat belt that can minimize human injury when traffic accident occurs, the number of traffic accident casualties not wearing seat belts still accounts for a significant proportion.The seat belt wearing detection system for all seats is a system that identifies whether all seat passengers wear a seat belt and encourages their usage, also it can be a useful technical countermeasure. Firstly, this study established the viability of system implementation by assessing the factors influencing the severity of injuries in traffic accidents through the development of an ordered probit model. Analysis results showed that the use of seat belts has statistically significant effects on the severity of traffic accidents, reducing the probability of death or serious injury by 0.054 times in the event of a traffic accident. Secondly, a meta-analysis was conducted based on prior research related to seat belts and injuries in traffic accidents to estimate the expected reduction in accident severity upon the implementation of the system.The analysis of the effect of accident severity reduction revealed that wearing seat belts would lead to a 63.3% decrease in fatal accidents, with the front seats showing a reduction of 75.7% and the rear seats showing a reduction of 58.1% in fatal accidents. Lastly, Using the results of the meta-analysis and traffic accident statistics, the expected decrease in the number of traffic accident casualties with the implementation of the system was derived to analyze the traffic safety effects of the proposed detection system. The analysis demonstrated that with an increase in the adoption rate of the system, the number of casualties in accidents where seat belts were not worn decreased. Specifically, at a system adoption rate of 60%, it is anticipated that the number of fatalities would decrease by more than three times compared to the current scenario. Based on the analysis results, operational strategies for the system were proposed to increase seat belt usage rates and reduce accident severity.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.285-291
• /
• 2015

FTMS, TCS, ITS equipment such as high-pass highway are just a situation that does not lack traceability and passive surveillance is related to fault DB has so far consisted of an integrated operations management to maximize utilization of the facility. In addition, there is no replacement parts are replaced when a failure occurs, increasing the number of parts and repair time I have trouble growing, and becoming a service interruption whenever you replace each time. In this study, proactively manage the failure history of a highway facility ITS tries to preventive maintenance. Therefore, the error history is based on the reliability of the high-pass facilities theory to calculate the reliability of the system through a systematic statistical analysis Operational Availability. The fault number and the time the replacement period through the estimate decreases and can reduce the budget expenses by securing the spare parts quantity, establish a management plan in part by improving the quality of the system through constant preventive maintenance, quality of service at all times It may direct the non-stop operation state of the available state.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.3
• /
• pp.77-86
• /
• 2002

Recently software industry in GIS(geographic information system) becomes an interesting issue by performing a large scale of national GIS application development as well as even small unit of FMS(facility management system). Also, there exist many cases to combine GIS with various business domains such as MIS(marketing information system), CNS(car navigation system) and ITS(intelligent transportation system). In this situation, in order to develop an efficient and useful GIS application for a short term, there must be a deep consideration of not only developing GIS component but also managing GIS component. In fact, even though there exist many certain components having high reusability, excellent interoperability and good quality, their reusability may be reduced because of their difficulty to access in a certain repository. Therefore, it is important to classify components having common characteristic based on their particular rule with reflecting their functionality and non-functionality before cataloging them. Here, there are two non-functional classification categories discussed such as GIS content-dependent metadata and GIS content-independent metadata. This cataloged components will help application developers to select easily their desired components. Moreover, new components may be easily producted by modifying and combining previous components. Finally, the original goal of all this effort can be defined through obtaining high reusability and interoperability of GIS component.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.4
• /
• pp.228-236
• /
• 2011

Since most Green House Gases (GHGs) and air pollutants are generated from the same sources, it will be cost-effective to develop a GHGs reduction plan in combination with simultaneous removal of air pollutants. However, effects on air pollutants reduction according to implementing any GHG abatement plans have been rarely studied. Reflecting simultaneous removal of air pollutants along with the GHGs emission reduction, this study investigated relative cost effectiveness among GHGs reduction action plans in Busan Metropolitan City. We employed the Data Envelopment Analysis (DEA), a methodology that evaluates relative efficiency of decision-making units (DMUs) producing multiple outputs with multiple inputs, for the investigation. Assigning each GHGs reduction action plan to a DMU, implementation cost of each GHGs reduction action plan to an input, and reduction potential of GHGs and air pollutants by each GHGs reduction action plan to an output, we calculated efficiency scores for each GHGs reduction action plan. When the simultaneous removal of air pollutants with the GHGs reduction were considered, green house supply-insulation improvement and intelligent transportation system (ITS) projects had high efficiency scores for cost-positive action plans. For cost-negative action plans, green start network formation and running, and daily car use control program had high efficiency scores. When only the GHGs reduction was considered, project priority orders based on efficiency scores were somewhat different from those when both the removal of air pollutants and GHGs reduction were considered at the same time. The expected action plan priority difference is attributed to great difference of air pollutants reduction potential according to types of energy sources to be reduced.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.1033-1041
• /
• 2017

Path travel time based on departure time (PTTDP) is key information in advanced traveler information systems (ATIS). Despite the necessity, forecasting PTTDP is still one of challenges which should be successfully conquered in the forecasting area of intelligent transportation systems (ITS). To address this problem effectively, a methodology to dynamically predict PTTDP between motorway interchanges is proposed in this paper. The method was developed based on the relationships between traffic demands at motorway tollgates and PTTDPs between TGs in the motorway network. Two different data were used as the input of the model: traffic demand data and path travel time data are collected by toll collection system (TCS) and dedicated short range communication (DSRC), respectively. The proposed model was developed based on k-nearest neighbor, one of data mining techniques, in order for the real applications of motorway information systems. In a feasible test with real-world data, the proposed method performed effectively by means of prediction reliability and computational running time to the level of real application of current ATIS.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.29-37
• /
• 2018

In recent years, there have been increasing interests in the mobile crowdsourcing that exploits multiple sensors, communication and user interfaces, and the computation power of widespread smartphones. In this paper, we present a novel mobile crowdsourcing-based driver assistance systems (MC-DAS) that crowdsource the sensor data of smartphone app having already passed a road segment, generate its profile information through a massive data processing, and forward this profile to the smartphone app of vehicle entering the road segment. Based on the MC-DAS platform, we also design and implement a new navigation system that advices the vehicle speed depending on the speedbump and on the road curvature profile. We expect that the proposed MC-DAS platform will be used as a platform for emerging new mobile crowdsourcing applications.

• Journal of Intelligence and Information Systems
• /
• v.13 no.3
• /
• pp.101-117
• /
• 2007

In this paper, we propose a customized genetic algorithm (GA) to find the minimum-cost guideway network (GN) of personal rapid transit (PRT) subject to connectivity, reliability, and traffic capacity constraints. PRT is a novel transportation concept, where a number of automated taxi-sized vehicles run on an elevated GN. One of the most important problems regarding PRT is how to design its GN topology for given station locations and the associated inter-station traffic demands. We model the GN as a directed graph, where its cost, connectivity, reliability, and node traffics are formulated. Based on this formulation, we develop the GA with special genetic operators well suited for the GN design problem. Such operators include steady state selection, repair algorithm, and directed mutation. We perform numerical experiments to determine the adequate GA parameters and compare its performance to other optimization algorithms previously reported. The experimental results verify the effectiveness and efficiency of the proposed approach for the GN design problem having up to 210 links.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.423-434
• /
• 2007

Vehicular ad-hoc network (VANET), a kind of mobile ad-hoc network (MANET), is a key technology for building intelligent transportation system (ITS). VANET is automatically and temporarily established through vehicle-to-vehicle communication without network infrastructure. It has the characteristics that frequent changes of network topology and node density are occurred and messages are disseminated through several relay nodes in the network. Due to frequent change of network topology and node density, however, VANET requires an effective relay node selection scheme to disseminate messages through the multi-hop broadcast. In this paper, we propose a contention window based multi-hop broadcast scheme for VANET. Each node has an optimized contention window and competes with each other for a relay node. The experimental results show that the proposed scheme has a better performance than the distance-based deterministic broadcast scheme in terms of message propagation delay and network traffic.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.4
• /
• pp.11-19
• /
• 2000

Real-time extraction of traffic information such as the number of vehicles passing, speed, road-occupancy rate, distance between vehicles, and vehicle types from the traffic scenes acquired from the camera on the road, is a core component of the intelligent transportation system(lTS) We present a scheme of extracting the traffic informations based on the spatio-temporal image analysis, which is robust to the variation of weather conditions and the shades. The images of two detection regions for each traffic lane are classified into one of the three categories: the road, the vehicle, and the shade, using the statistical and structural features Quantitative traffic informations are retrieved by analysing the two spatio-temporal images. Since only the local images of detection regions are processed, the real-time operation of more than 30 frames per second is realized while ensuring the detection performance robust to the operating condition.