• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.87-95
• /
• 2010

Lots of bridge structure generated the change of outward formation according to durability capability and decrepitude by long use. Especially, in case of the typhoon, snowing and earthquake is going to make rapidly more worse formation about the old structural facilitys. Also, outward formation by irregular and micro-distortion in bridge structure could not easily checked by normal diagnostics method. As a result, performance-capability of structure facility is getting to make a decline in standard of structure performance. Recently, real-time monitoring technology by wireless environment go into the study of irregular movement for structure facility. This paper presents the development of sensor to displacement checking about bridge structure. Sensing method of developed sensor put bring into the gyroscope technology using the acceleration speed and angular acceleration speed. This paper also will simulated to verified the monitoring capability of developed sensor against random vibration, frequency and distortion in simulated equipment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.38-44
• /
• 2013

In this paper, we designed and implemented a mobile video transmission device with 1080i resolution and 30fps frame rate using wireless multi-access technologies. The video acquisition delay time of 16us and jitter of 21ms for this equipment were obtained, respectively. The device is designed to access various communication networks. In order to evaluate the performance of its video transmission capability, a server and monitoring viewer are implemented. In the performance test using LTE network, 211ms delay time was obtained at 3Mbps transmission. Rendering of 1fps frame rate at the 265kbps transmission was confirmed for the transmission test using Inmarsat network.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.3
• /
• pp.369-374
• /
• 2005

Currently, ECDIS and GPS plotters are much used as equipment providing operators with route information, but they do not have any function of automatic route creation and route explanation, so available for only experienced operators. Especially, the present situation is that no study is made of the automatic route creation and route explanation using ENC for ECDIS, substitution system of paper chart. ENC is the electronic navigation chart that is produced using S-52, 5-57 standard format required by IHO. In this paper, an Navigation Guiding System(NGS) is proposed to generate an optimal route where ENC and GPS data is fusioned including the wind direction and speed of an anemometer. The proposed system was testified by a simulation, and its effectiveness was verified.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.365-369
• /
• 2015

In this paper, geographic information system(GIS) for an intelligent power distribution network was implemented with location informations acquired from automatic meter reading system, where the location informations of power line communication(PLC) modems installed at customer side were collected at data concentration units(DCUs) of headend equipment via PLC and then were transmitted to front end processor server. By displaying the connection status of the power distribution network on GIS map, operation of advanced metering infrastructure(AMI) or management of power grid system could be performed intuitionally and in real time, because the configuration state of the power grid could be easily monitored. The feasibility of the proposed system was confirmed with the especially constructed laboratory-level test bed and the verification test of the system will be carried out for a real power distribution network.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.373-376
• /
• 2007

The construction industry is an inevitable part of modem development. Now-a-days, the construction industry experiencing several issues related with the maintenance of productivity, quality and labor. Hence there is an immediate requirement for the development of technologies enabling the automated construction equipment. The new technologies should also assure the sufficient safety and efficiency. In the present investigation, an attempts have been made for the development of object sensing algorithm and safety control system for intelligent excavating system. we have analyzed some elemental technologies for sensing objects and also proposed a technology for safety control system as well. The proposed technology will highly influence the safe working performance of construction industry in the positive sense.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.834-844
• /
• 2012

Nonlinear electronic loads draw harmonic currents from the power grids that can cause energy loss, miss-operation of power equipment, and other serious problems in the power grids. This paper proposes a harmonic compensation method using multiple distributed resources (DRs) such as small distributed generators (DGs) and battery energy storage systems (BESSs) that are integrated to the power grids through power inverters. For harmonic compensation, DRs should inject additional apparent power to the grids so that certain DRs, especially operated in proximity to their rated power, may possibly reach their maximum current limits. Therefore, intelligent coordination methods of multiple DRs are required for efficient harmonic current compensation considering the power margins of DRs, energy cost, and the battery state-of-charge. The proposed method is based on fuzzy multi-objective optimization so that DRs can cooperate with other DRs to eliminate harmonic currents with optimizing mutually conflicting multi-objectives.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.69-76
• /
• 1999

This paper proposed a design of intelligent supervisory control systems for maintenance of highway traffic information equiprrent and processing algorithm of equiprrent fault data. The fault data of highway traffic equipment are transmitted from rerrnte supervisory controller to central supervisory system by real time, the transmitted fault data are anaIyzed the characteristic using evaluation algorithm of fault data in central supervisory system. The evaluation algorithm includes a neural network and fault knowlOOge-base for processing the multi-generated fault data. For validating the evaluation algorithm of intelligent supervisory control systems, the rrethod of analysis used to the five pattern of binary signal by transmitted real time and the opTclting user-interface constructed in central supervisory system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.562-568
• /
• 2010

Until now, the implementation of servo motor control units which is being applied in various industrial ares such as industrial system, office equipment, home appliance and robotics, used the MCU and DSC(or DSP). However, MCU and DSC have limitations of not being able to maximize control efficiency of the motor and the flexibility. Thus, in this paper, we propose and implemented the designing method for development of servo motor control IP based on FPGA which have a structure to make the best motor control efficiency and flexibility of control,

• Journal of Drive and Control
• /
• v.12 no.3
• /
• pp.11-17
• /
• 2015

An intelligent deburring control (IDC) device is used to control the constant force for a deburring tool mounted on the end-effector of a robotic arm. This device maintains a constant contact force between the deburring tool and the workpiece in order to provide a good deburring performance. In this paper, we build a mathematical model in Matlab/Simulink to estimate the force control mechanism of the pneumatic system for the IDC device. The Simulink blocks are built for each separate part and are linked into an integrated simulation system. Such a model also relies on the effects of the flow rate through the valve, air compressibility in the cylinder, and time delay in the pressure valve. The results of the simulation are compared to a simple experiment in which convenient math modeling is performed. These results are then used to optimize the mechanical design and to develop a force control algorithm for the pneumatic cylinder.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.2
• /
• pp.117-127
• /
• 1998

Power systems have uncertain dynamics due to a variety of effects such as lightning, severe storms and equipment failures. The variation of the effective reactance of a transmission line due to a fault is an example of uncertainty in power system dynamics. Hence, a robust controller to cope with these uncertainties is needed. Recently, fuzzy controllers are becoming quite popular for robust control due to its potential of dealing with uncertain systems. Thus in this paper we design an adaptive fuzzy controller based on an input-output linearization approach for the transient stabilization and voltage regulation of a power system under a sudden fault. Also this paper proposes a fuzzy system that estimates the upper bound of uncertain term in the system dynamics to guarantee the Lyapunov stability. Simulation results show that good performance is achieved by the proposed controller.