• ETRI Journal
• /
• v.36 no.2
• /
• pp.214-223
• /
• 2014

A fully-integrated penta-band reconfigurable power amplifier (PA) is developed for handset Tx applications. The output structure of the proposed PA is composed of the fixed output matching network, power and frequency reconfigurable networks, and post-PA distribution switches. In this work, a new reconfiguration technique is proposed for a specific band requiring power and frequency reconfiguration simultaneously. The design parameters for the proposed reconfiguration are newly derived and applied to the PA. To reduce the module size, the switches of reconfigurable output networks and post-PA switches are integrated into a single IC using a $0.18{\mu}m$ silicon-on-insulator CMOS process, and a compact size of $5mm{\times}5mm$ is thus achieved. The fabricated W-CDMA PA module shows adjacent channel leakage ratios better than -39 dBc up to the rated linear power and power-added efficiencies of higher than around 38% at the maximum linear output power over all the bands. Efficiency degradation is limited to 2.5% to 3% compared to the single-band reference PA.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.167-176
• /
• 2006

An minimum path algorithm for integrated networks with departure time constraints require considering arrival time of arriving mode, transfer time. waiting time, and departure time of next mode. Integrated network with diverse modes commonly include departure time constraints. Because public mode suck as train and airplane have fixed service schedule which provide passengers. This study developed the k-path algorithm in integrated network with time varying conditions and departure time constraints. We proposed the extended method based on entire path deletion method, and examined the application of the proposed algorithm through case study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1207-1213
• /
• 2009

A design method of network Topology for Integrated Management of various Networks is prposed and an example is shown. The TMN-DCN devices are assigned for each of the various networks. These devices have functions of network management. Also we propose the simple design methods of the network topology with survivability as one of the network management elements. The design methods are very simple but very useful. Because there is no general design algorithm for optimal topology with network survivability.

• Health Policy and Management
• /
• v.24 no.4
• /
• pp.304-311
• /
• 2014

This manuscript treats a new paradigm for the Korean health care system. We give an account of innovative health care delivery and payment models widely discussed in the contemporary US accountable care organization and coordinated care organization. In doing so, we explore a new health care model amenable to foreseeable changes to the health care system. We propose creating an integrated health care system in which the network of health care providers delivers coordinated and comprehensive care for enrolled patients residing within the geographic boundaries served by the provider network; providers may participate voluntarily in one or more networks and assume shared responsibility for patient care and cost; provider networks compete with each other based on cost and quality; and consumers are allowed to choose a network. We expect that the new paradigm will create a financially-sustainable system that assures quality of care and improves patient experience, minimizing the existing system-wide inefficiency through cross-network competition and within-network care coordination.

• Journal of Communications and Networks
• /
• v.17 no.6
• /
• pp.558-567
• /
• 2015

In recent years, we have seen a proliferation of mobile-network-enabled smart objects, such as smart-phones and smart-watches, that form a cyber-physical integrated network to connect the cyber and physical worlds through the capabilities of sensing, communicating, and computing. Discovery of the relationship between smart objects is a critical and nontrivial task in cyber-physical integrated network applications. Aiming to find the most stable relationship in the heterogeneous and dynamic cyber-physical network, we propose a distributed and efficient relationship-discovery algorithm, called dynamically maximizing remaining unchanged time with minimum connected dominant set (DMRUT-MCDS) for constructing a backbone with the smallest scale infrastructure. In our proposed algorithm, the impact of the duration of the relationship is considered in order to balance the size and sustain time of the infrastructure. The performance of our algorithm is studied through extensive simulations and the results show that DMRUT-MCDS performs well in different distribution networks.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.313-318
• /
• 2011

When wireless channels undergo fast fading, non-coherent frequency shift keying (FSK) (de)modulation schemes may be considered for amplify-and-forward (AF) cooperative communications. In this paper, we derive the bit-error-rate performance of partial non-coherent receiver as a lower bound of the optimal non-coherent receiver for FSK modulated AF cooperative communications. From the simulation and analytical results, it is found that the derived lower bound is very closed to simulation results. This result shows that knowing partial channel state information may not improve system performance significantly. On the other hand, conventional optimal non-coherent receiver involves complicated integration operation. To address the above complexity issue, we also propose a near optimal non-coherent receiver which does not involve integration operation. Simulation results have shown that the performance gap between the proposed near optimal receiver and the optimal receiver is small.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.931-941
• /
• 2014

Many methodologies for clock mesh networks have been introduced for two-dimensional integrated circuit clock distribution networks, such as methods to reduce the total wirelength for power consumption and to reduce the clock skew variation through consideration of buffer placement and sizing. In this paper, we present a methodology for clock mesh to reduce both the clock skew and the total wirelength in three-dimensional integrated circuits. To reduce the total wirelength, we construct a smaller mesh size on a die where the clock source is not directly connected. We also insert through-silicon vias (TSVs) to distribute the clock signal using an effective clock TSV insertion algorithm, which can reduce the total wirelength on each die. The results of our proposed methods show that the total wirelength was reduced by 12.2%, the clock skew by 16.11%, and the clock skew variation by 11.74%, on average. These advantages are possible through increasing the buffer area by 2.49% on the benchmark circuits.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.472-476
• /
• 2007

Learning rule affects importantly the performance of neural network. This paper proposes a new fuzzy learning rule that uses the learning rate considering the distance between the input vector and the prototypes of classes. When the learning rule updates the prototypes of classes, this consideration reduces the effect of outlier on the prototypes of classes. This comes from making the effect of the input vector, which locates near the decision boundary, larger than an outlier. Therefore, it can prevents an outlier from deteriorating the decision boundary. This new fuzzy learning rule is integrated into IAFC(Integrated Adaptive Fuzzy Clustering) fuzzy neural network. Iris data set is used to compare the performance of the proposed fuzzy neural network with those of other supervised neural networks. The results show that the proposed fuzzy neural network is better than other supervised neural networks.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.85-94
• /
• 2008

As a variety of wireless network services, such as WLAN, WiBro, cdma2000, and HSDPA, are provided and the range of users' choices for the wireless services are broaden, MCoA (Multiple Car-of Address) concepts that enable users to use wireless interfaces simultaneously have been presented in IETF MONAMI6 WG. Through this scheme, users can access several networks simultaneously by using multiple wireless interfaces. Such various wireless connection technologies continue to advance as they are connected and integrated to All-IP-based core network, and at the same time, heterogeneous networks are being managed overlaid according to the coverage of the wireless connection technologies. Under such circumstances, needs for an integrated architecture have arisen, and thus Wireless service framework is required that effectively manages heterogeneous networks which coexist with next generation's networks for 4G. In this paper, a wireless service framework is suggested in the consideration of current wireless service environment, and the framework covers the schemes to minimize the packet loss caused by handover, and also modified Multiple Care-of Address that helps to select most effective network by considering characteristics of various interfaces as well as users' preferences.

• Proceedings of the KOR-KST Conference
• /
• 2007.05a
• /
• pp.159-168
• /
• 2007