• 제목/요약/키워드: Integrated M&S

검색결과 861건 처리시간 0.027초

X-band용 MMIC 오실레이터 설계연구 (Studies on MMIC oscillator using HBT for X-band)

  • 채연식;안단;이진구
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.387-390
    • /
    • 1998
  • In this paper, HBT's with lower phase noise and passive elements, such as resistors, capacitors and inductors, for resonance and impedance matching networks are designed, fabricated, tested, and carefully analysed, respectively, and then, they are integrated for the design and fabrication of functional X-band oscillators with lower phase noise. Epi-wafers for HBT's with the structure of graded $Al_{x}$G $a_{1-x}$ As emitter and C-doped base layer of 700.angs. thick were used to specially emphasize the improvement of $f_{T}$ and $f_{max}$, and the lowering of phase noise, in design aspects. At the test frequencies of 12GHz, capacitances of MIM capacitors, spiral inductor, and resistances are 0.5~10pF, 0.4~11.06nH, and 20~1,380.ohm., respectively. The emitter size of HBY's for the X-band MMIC oscillators is 3*10u $m^{2}$, and find chip size is 0.9*0.9m $m^{2}$..EX>.

  • PDF

MRF 공정을 이용한 집적형 광 픽업용 대면적 실리콘 미러 제작 (Fabrication of Large Area Si Mirror for Integrated Optical Pickup by using Magnetorheological Finishing)

  • 박성준;이성준;최석문;민병권;이상조
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.1522-1526
    • /
    • 2005
  • In this study, the fabrication of large area silicon mirror is accomplished by anisotropic etching using MEMS for implementation of integrated optical pickup and the process condition is also established for improving the mirror surface roughness. Until now, few results have been reported about the production of highly stepped $9.74^{\circ}$ off-axis-cut silicon wafer using wet etching. In addition rough surface of the mirror is achieved in case of long etching time. Hence a novel method called magnetorheolocal finishing is introduced to enhancing the surface quality of the mirror plane. Finally, areal peak to valley surface roughness of mirror plane is reduced about 100nm in large area of $mm^2$ and it is applicable to optical pickup using infrared wavelength.

  • PDF

수중 교전 시뮬레이션을 위한 페더레이션 개발 (The Federation Development for Underwater Warfare Simulation)

  • 신지환
    • 한국시뮬레이션학회논문지
    • /
    • 제16권3호
    • /
    • pp.11-18
    • /
    • 2007
  • 최근 무기체계는 성능이 다양하고 복잡해지고 있으며 에 따라 개발 위험 요소가 증대하고 있다. 이에 따라 무기체계 회득 비용의 감소 및 획득 기간의 감소 요구가 증대되고 있다. 이와 같은 획득 환경 아래에서 무기체계를 보다 효율적으로 개발하기 위하여 무기체계 소요제기에서부터 국방 M&S 기법을 적용할 필요성이 대두되면서 M&S 체계를 개발하여 적용하고 있다. 분산 환경하에서 모델링 및 시뮬레이션에 대한 중요성이 강조되면서 시뮬레이션 모델들의 상호운용성, 재사용성 및 확장성을 향상시키고 데이터 교환 및 시간 진행을 조절하는 등의 장점을 지닌 HLA, SEDRIS 등의 M&S 표준이 개발되었고 상호운용성을 개선시킬 수 있도록 체계공학적인 절차인 FEDEP(Federation Development & Execution Process)을 개발하고 이 절차의 사용을 권장하고 있다. 본 논문에서는 5단계의 표현을 기준으로 사용하여 해양무기체계 시뮬레이션 기반 설계 기술 구축 연구의 해양무기체계 Test Bed를 개발하기 위한 Prototype으로 수중 교전 시뮬레이터(Underwater Engagement Simulation:UNES)를 구성함에 있어 통합 아키텍처로 HLA를 채택하고 있다. 따라서, 미래의 확장성을 위하여 FEDEP에 따라 시뮬레이터를 개발하였으며 UNES 개발에 FEDEP를 적용하는 과정을 기술하고 그 과정 동안에 확인하여야 할 사항에 대하여 정리하였다.

  • PDF

사용자 수준 맞춤형 모델링 및 시뮬레이션을 위한 개발환경 및 확장된 DEVS 형식론 (Development Environment and Extended DEVS Formalism for User-Level Customizable Modeling and Simulation)

  • 이준희;강봉구;김탁곤
    • 한국시뮬레이션학회논문지
    • /
    • 제27권3호
    • /
    • pp.37-44
    • /
    • 2018
  • 복잡한 이산 사건 동적 시스템을 분석하기 위해 모델링 및 시뮬레이션(M&S) 기법을 적용함에 있어서, 기존에는 사용자 수준에 따라 각기 다른 시뮬레이션 환경을 사용해야 했다. 그에 따른 불편함을 해결하기 위하여 본 논문에서는 사용자 수준에 따라 M&S를 수행할 수 있는 통합된 개발 환경 및 개발 환경에서 모델을 효율적으로 관리하기 위해 정형화된 인터페이스를 제안한다. 인터페이스는 확장된 DEVS 형식론 및 모델 제작 규칙으로 구성되어있다. 개발 환경은 모델링 환경과 시뮬레이션 환경으로 나뉘고, 모델링 환경에서는 사용자의 수준별로 다른 모델링 방식을 제공한다. 모델링 작업의 결과로 생성된 모델을 활용하여 시뮬레이션 환경에서 여러 파라미터를 입력해서 시뮬레이션 함으로써 다양한 경우에 대해서 실험을 할 수 있다. 사례 연구에서는 제안한 M&S 환경을 구현한 내용에 대해 소개하고, 환경을 활용해서 복잡한 국방 전투 시스템을 모델링하고, 만들어진 모델을 바탕으로 시뮬레이션 하는 과정을 소개한다.

생산자원(4M1E) 실시간 융합과 자율재구성용 미들웨어 개발 (Development of Production Resources (4M1E) Integration in Real Time and Middleware for Autonomous Configuration)

  • 차석근;윤재영;이성근;허영숙
    • 한국정밀공학회지
    • /
    • 제31권4호
    • /
    • pp.303-309
    • /
    • 2014
  • This paper contains how to integrate production resources of 4M1E (Man, Machine, Material, Method and Energy), analyze and collect various type of management information which emphasize the need of a common platform's 4M1E Middleware and Autonomous Configuration. Management efficiency improved by the functionality of integrated management information and digitizing information with standardized data.

Source Coupled FET Logic을 이용한 4:1 병렬 ADC 설계 (A Circuit Design of 4:1 Parallel ADC Using Source Coupled FET Logic)

  • 윤몽한;임명호;이상원;이형재
    • 한국통신학회논문지
    • /
    • 제15권6호
    • /
    • pp.467-474
    • /
    • 1990
  • 본 연구에서는 기존의 SCFL(Source Coupled FET Logic)회로보다 고속 저전력 특성을 지닌 회로를 설계하였다. 설계된 SCFL을 이용하여 4:1 병렬 A/D 컨버터를 구성, 시뮬레이션 한 결과 비교기(Comparator 혹은 양자화기)는 66MHz 입력신호와 2GHz 샘플링 주파수에서 Integral Nonlinearity는 $\pm$28mV로 한계치 $\pm$68mV 보다 훨씬 작으며, ADC 설계시 150여개의 소자를 줄여 전력소비 0.43mW를 실현케 하였다.

  • PDF

과천.부산경남 경마공원의 통합경주자료를 이용한 더러브렛 경주마의 유전능력 평가 (Genetic Evaluation of Thoroughbred Racehorses Using the Integrated Racing Records Collected from Different Racetracks)

  • 조광현;손삼규;조병욱;김종규;공홍식;이학교;박경도
    • Journal of Animal Science and Technology
    • /
    • 제52권2호
    • /
    • pp.97-102
    • /
    • 2010
  • 본 연구의 목적은 과천경마공원과 부산 경남경마공원의 통합 자료를 이용한 유전능력 평가모형의 적합성을 구명하는데 있으며, 얻어진 결과는 다음과 같다. 1,400m 이하의 경주거리에서는 과천경마공원의 주파기록이 우수하였으나 1,800m 이상의 경주거리에서는 부산 경마공원의 주로에서 주파기록이 더 우수하였다. 동기그룹의 효과는 전체 변이의 42.7~70.2%를 차지하였으며, 이중 경주편성을 고려하는 참가경주의 효과는 일괄적으로 모든 경주거리에서 가장 크게 나타났다. 주파기록에 대한 유전력과 반복력은 각각 0.153~0.238과 0.401~0.498의 범위로 추정되었다. 통합자료에서 추정된 육종가와 과천경마공원과 부산 경마공원의 기록에서 추정된 육종가간의 상관계수는 각각 0.907과 0.803으로 나타났으며, 순위 상관은 각각 0.891과 0.846으로 나타났다. 통합자료의 연간자마수득상금과 과천경마공원과 부산 경마공원에서 취득한 연간자마수득상금간의 상관계수는 각각 0.943과 0.886으로 나타났으며, 순위 상관은 각각 0.938과 0.853으로 나타났다. 또한 과천경마공원과 부산경마공원에서 취득한 연간자마수득상금간의 상관계수는 0.742로 추정되었다. 이러한 결과에서 비추어 볼 때 부산 경남경마공원의 경주기록이 안정화되고 향후 경주자료가 더 많이 축적된다면 통합자료를 이용한 유전능력 평가는 충분한 설득력을 얻을 수 있을 것이라 생각된다.

UML(Unified Modeling Language)기법을 이용한 PCM전류차동계전기 정정모듈 개발 (Development of PCM Current Differential Relay Setting Module Using UML)

  • 오태욱;오성민;민병운;이승재;최면송
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 A
    • /
    • pp.329-331
    • /
    • 2003
  • PROSET2000 that is integrated protective management system had developed and used in order to automate the setting process of protective relays in transmission system protection. PROSET2000 have database for relay setting and automated for relay setting program within. This paper proposed PCM current differential relay setting program point of Object Oriented Programming paradigm using Unified Modeling Language about additional relay in PROSET2000. Nevertheless each relay uses same current differential but setting method is different. This paper discribed different thing about setting method of each relay and evaluated more effective and corrective relay setting program using UML.

  • PDF

M2M Device최적화 설계와 4M 생산자원 정보통합 (Optimizing the Design of M2M Device and Methodology for Integrating 4M Manufacturing Resources)

  • 윤재영;김한규;이성근;허영숙;차석근
    • 한국정밀공학회지
    • /
    • 제29권4호
    • /
    • pp.380-385
    • /
    • 2012
  • This paper contains the optimized M2M technology, and the information of production resource of 4M, which understanding the roles and functions of M2M Device, and the explanation of its effectiveness, and the information of optimized M2M Device in IT convergence point of view. In addition, this content also points out the optimized M2M Device, analyzes and collects various type of management information which emphasizes the need for a common platform's were Middleware, and Auto-Configuration, WebLine Monitoring, WebService through the functionality of an integrated management information supports the productions by digitizing the information with standardized data for management efficiency.

FAR-IR GALACTIC EMISSION MAP AND COSMIC OPTICAL BACKGROUND

  • Matsuoka, Y.
    • 천문학논총
    • /
    • 제27권4호
    • /
    • pp.353-356
    • /
    • 2012
  • We present new constraints on the cosmic optical background (COB) obtained from an analysis of the Pioneer 10/11 Imaging Photopolarimeter (IPP) data. After careful examination of the data quality, the usable measurements free from the zodiacal light are integrated into sky maps at the blue (${\sim}0.44{\mu}m$) and red (${\sim}0.64{\mu}m$) bands. Accurate starlight subtraction was achieved by referring to all-sky star catalogs and a Galactic stellar population synthesis model down to 32.0 mag. We find that the residual light is separated into two components: one component shows a clear correlation with the thermal $100{\mu}m$ brightness, whilst the other shows a constant level in the lowest $100{\mu}m$ brightness region. The presence of the second component is significant after all the uncertainties and possible residual light in the Galaxy are taken into account, thus it most likely has an extragalactic origin (i.e., the COB). The derived COB brightness is ($(1.8{\pm}0.9){\times}10^{-9}$ and $(1.2{\pm}0.9){\times}10^{-9}\;erg\;s^{-1}\;cm^{-2}\;sr^{-1}\;{\AA}^{-1}$ in the blue and red spectral regions, respectively, or $7.9{\pm}4.0$ and $7.7{\pm}5.8\;nW\;m^{-2}\;sr^{-1}$. Based on a comparison with the integrated brightness of galaxies, we conclude that the bulk of the COB is comprised of normal galaxies which have already been resolved by the current deepest observations. There seems to be little room for contributions from other populations including "first stars" at these wavelengths. On the other hand, the first component of the IPP residual light represents the diffuse Galactic light (DGL)-scattered starlight by the interstellar dust. We derive the mean DGL-to-$100{\mu}m$ brightness ratios of $2.1{\times}10^{-3}$ and $4.6{\times}10^{-3}$ at the two bands, which are roughly consistent with previous observations toward denser dust regions. Extended red emission in the diffuse interstellar medium is also confirmed.