• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.295-306
• /
• 2022

The NOx removal performance of the SCR process depends on various factors such as catalytic factors (catalyst composition, shape, space velocity, etc.), temperature and flow rate distribution of the exhaust gas. Among them, the uniformity of the flow flowing into the catalyst bed plays the most important role. In this study, the flow characteristics in the SCR reactor in the design stage were simulated using a three-dimensional numerical analysis technique to confirm the uniformity of the airflow. Due to the limitation of the installation space, the shape of the inlet duct was compared with the two types of inlet duct shape because there were many curved sections of the inlet duct and the duct size margin was not large. The effect of inlet duct shape, guide vane or mixer installation, and venturi shape change on SCR reactor internal flow, airflow uniformity, and space utilization rate of ammonia concentration were studied. It was found that the uniformity of the airflow reaching the catalyst layer was greatly improved when an inlet duct with a shape that could suppress drift was applied and guide vanes were installed in the curved part of the inlet duct to properly distribute the process gas. In addition, the space utilization rate was greatly improved when the duct at the rear of the nozzle was applied as a venturi type rather than a mixer for uniform distribution of ammonia gas.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.37-43
• /
• 2015

This study examined the effects of the minimum horizontal load on the structural behaviors and safety of system supports. The minimum horizontal load was frequently ignored in the design of system supports even though the level of that load was specified in the code and guide in Korea such as 'Standard Specification in Temporary Construction' and 'Guide to Installation of Shores for a Concrete Bridge'. To examine the effects of considering the minimum horizontal load, the finite element analysis were performed for various system supports. By varying installing parameters of system supports such as the vertical member spacing, the installation height, and the thickness of slab, the maximum combined stress ratios were estimated to investigate the structural safety of system supports. The results showed similar axial stress in vertical members but an increase in bending stress with a consideration of the horizontal load. The combines stress ratios are remarkably increased due to the consideration of the horizontal load. Consequently, the system supports, which were initially estimated to be safe when only the vertical loads were considered, were changed to be unsafe in most cases by the effects of the both the vertical and horizontal stresses. Therefore, the minimum horizontal load following the code and the guide is an essential load that could control the structural safety of system supports.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.145-151
• /
• 2019

In this study, the effects were analyzed by applying the vibration absorption liner into the guide rail bracket as a part of method to reduce the vibration and noise on the high-rise apartment. As the result of vibration absorption liner performance, it was checked that the level of vibration and noise was reduced around 65.49% in the car side and around 90.05% in the counterweight side. Therefore, the vibration absorption effect by the vibration absorption liner of elevator guide rail bracket became fairly good. In case of the vibration absorption liner application, there was an effect on the reduction of 7.26 to 22.22% at hoistway section area, 3,840,000 to 9,780000 KRW at the cost of material and installation by comparing with the damping beam application. Also, in case of the vibration absorption liner application with light weight instead of damping beam with heavy weight, it was thought to become significant effect at preventing the safety from the accidents on installation site.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.99-108
• /
• 2010

Due to the recent emergence of global warming concerns, the UN has made the issue of climate change its top priority. Accordingly, Korea has announced a new national master plan titled, 'Participation in global efforts in climate change through -Low Carbon, Green Growth-'. As part of the plan, the constructions of bicycle path networks are being pushed forward. Although the building of bicycle paths and infrastructure is being implemented, little consideration has been given for bicycle path signage. This essay is the study of methodology in the installation of signs on bicycle paths. The research includes a theoretical study of the standard and installation position of signs with consideration of the geometry of bicycles as well issues such as the distance required for the bicyclist to recognize and understand the road sign and to take actions like stopping, In addition, experimental verification of the test results has been carried out. Also, the test on height of signs by changing the installation heights according to a bicyclist's forward vision angle has been conducted.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.199-204
• /
• 2010

The purpose of this study is to estimate the effectiveness of newly proposed guide sign system. Existing guide sign system on expressways in South Korea have point-based system with city, district names or land marks. They have also several problems as excessive amount of information, low use of exit number, and lack of lane designation arrows. Efficiency of existing guide sign system is deteriorated from these problems. The enhanced guide sign system is proposed to alleviate problems. The best alternative sign system is chosen from three different designs with preference survey and human factors evaluation. The new signs showed reduced time compared to existing signs with statical significance. The existing sign system conveys more information in farther distance and less information in nearer distance. Nevertheless new systems imparts more information i nearer distance. It is also suggested that lane designation signs should be established with overhead installation at 0m point for efficient direction choice.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.10
• /
• pp.59-66
• /
• 2011

In electric power system, the circuit breaker is not operated when the higher voltage then the rated TRV(transient Recovery Voltage) appeared in the circuit breaking, The TRV of a circuit breaker means the characteristics of reignition by the arc between two poles. and is decided by the value of connecting Impedance. In this paper we of carried out many kinds of experiments varying the types of bus, the types of installation, the length of installation between 22.9 [kV] level circuit breaker and MTR in general 154/22.9[kV] system, We also simulated the characteristics of TRV using EMTP-RV program. The suitability of TRV in assessed by Uc, RRRV(Rate of Rise of Recovery Voltage) which are defined by the international guide, IEC62271-100. The values of RRRV gained from the cable-made bus are 590[%] lesser than those from the NSPB-made bus respectively. So the triangled type is more rational in the aspect of TRV.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.8
• /
• pp.464-470
• /
• 2013

Economic feasibility was conducted regarding the regulation that dictates obligatory installation of renewable energy facilities in small proportion. A concern is how to allocate the capacities of candidate facilities (solar collectors, PV cells and geothermal heat pumps) with minimum cost, and meet the obligatory energy supply proportion. A design rule has been developed, with which a designer can tune his or her design strategy between installation cost and LCC. This was derived mainly from documents regarding the KEMCO installation guide. It was concluded that PV was the cheapest, with respect to installation cost, but a geothermal heat pump was the most recommended, when LCC was also taken into account. The proposed design result was also confirmed, by simulation results obtained from Energy Plus.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.11a
• /
• pp.154-159
• /
• 2005

The most common conception of a work of art is as a unique object. In conservation the prevalent notion of authenticity is based on physical integrity, this guides judgements about loss. For the majority of traditional art objects, minimising change to the physical work means minimising loss, where loss is understood as compromising the (physical) integrity of a unique object, and this forms the focus of conservation. Fundamental to conservators' approach to the conservation of contemporary art is the notion that the artist's intent should guide conservators' practice. Since most of the artists creating installation art are living, it is possible to interview them about the details of the installation, attitudes to changing technology, parameters of acceptable change and their views about what aspects of the installation are essential to preserve. Conservation is no longer focused on intervening to repair the art object but has become concerned with documentation and determining what change is acceptable and managing those changes. In order to accurately install works in the future it is necessary to broaden our focus to include elements of an installation that affect the viewer's experience. This might mean documenting the space, the acoustics, the balance of the different channels of sound, the light levels and the way one enters and leaves the installation. These are as important as the more tangible or material elements in the conservation of the work. It is also necessary to work with industry and specialists outside the field of conservation to develop new skills to preserve and manage new types of objects in our care. We can also document the less tangible details of an installation such as the light levels, the character of the sound etc. This is a new area of conservation and as a profession our understanding and knowledge will deepen with time. All of these strategies work together to help to limit the risk of not being able to accurately install these works in the future. Deciding what can be changed and how to best care for any element of an installation will depend on its meaning and role. For both contemporary and traditional objects such decisions are documented by conservators and although the focus of the conservator may have moved away from the material object, the approach is still rooted in traditional notions of collection care.

• Plant Journal
• /
• v.9 no.3
• /
• pp.48-52
• /
• 2013

In this study, the internal flow field of SCR Denitrification Plant was simulated by using Computational Fluid Dynamics(CFD). In order to analyze the uniformity of flow field, an interpretation on the pre-existing facilities was performed, and some moot points were identified and compensated through this analysis. The compensatory methods include the installation of the Porous Plate below the bottom of the Baffle to create uniform flow and also, and the Guide Vane was also placed in the bend of pipe to guide the flow uniformly. Lastly, the Baffle was installed to deduct equalized space distribution of the air flow, initially flowed into the SCR Plant.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.131-141
• /
• 2016

PURPOSES : While road networks are becoming increasingly complex, traffic signs are being indiscriminately installed and operated, which makes drivers who depend on traffic signs to reach their destination confused and unable to understand road information efficiently. In order to promptly and exactly guide road users to their destinations, traffic signs should be able to satisfy the functions of connectivity, visibility, and location suitability. However, the results of a site survey shows that most of the traffic signs currently installed in the Jeollanam-do Province do not satisfy these functions. METHODS : This study analyzed the problems of traffic signs after an actual site survey and focused on a total on 9,353 traffic signs and 70 road routes in Jeollanam-do Province. RESULTS : This study analyzed the problems of traffic signs based on their required functions (connectivity, visibility, suitability) and suggested improvements by establishing a guide system that considered the problems found in the study. CONCLUSIONS : The guide system can be utilized as a basic material that provides efficient road information for future installation and maintenance of traffic signs in Jeollanam-do Province.