• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.6-8
• /
• 2002

In order to prepare magnetic recording layer with a good quality crystallographic characteristic. We prepared $Co_{77}Cr_{20}Ta_3$ layer for perpendicular magnetic recording media on slide glass substrate by Two-Step Methode. The thickness of magnetic layer was fixed 100 nm and buffer layer were varied from 10 to 50 nm, and input current was varied from 0.2[A] to 0.5[A]. The surface morphology and crystal orientation of the CoCrTa films were examined with XRD. Prepared thin films showed improvement of dispersion angle of c-axis orientation ${\Delta}{\theta}_{50}$ caused by inserting buffer layer.

• Journal of Sensor Science and Technology
• /
• v.27 no.6
• /
• pp.374-379
• /
• 2018

The piezocomposite transducer is widely used because it is highly efficient in transforming electric energy into mechanical energy, and its frequency range is broader than that of other types of ultrasound transducers. A general piezocomposite transducer is composed of an acoustic lens, impedance matching layers, piezoelectric materials, and backing layers. When an input voltage is applied to a piezoelectric material as an active material, it generates sound waves while vibrating. At that time, an impedance matching layer helps the sound waves to propagate forward while reducing the impedance mismatch that may occur at the interface between the active material and its front material. The impedance mismatch has a negative effect on the signal of an ultrasound transducer; thus, it is important to design a matching layer to overcome the issue. In this study, an optimized feature of a matching layer with gradient properties is studied. An objective function is defined to minimize both the average and the deviation of the reflection coefficients that are functions of the frequencies. As a result, an improvement in the signal characteristics with respect to the sensitivity and bandwidth is reported.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.1
• /
• pp.31-40
• /
• 1997

The objectives of color reproduction in printing, photography, and digital hard-copy is an important problem. The Color is obsorved differently from illumination an obsorvation condition, and varied according to individual taste. Generally, the color reproduction system is designed with colorimetric color reproduction method. But the color gamut of the color reproduction system is different each other and the one device has nonlinear relationalship between the other. By these reason, to predict the reproduced color based on linear color transform method is difficult. Some methods of non-linear color transform by neural network was proposed. These method was theoretical useful and valid to transform from CIE color to device color. But more studies were needed to realize the non-linear color transform system. In this paper, we described a method to realize the non-linear color transform system by neural network. The optimum structure of the non-linear color transform system was found out. The structure of descrived system has four layer( input, output and two hidden layers.) Input and output layer have 3 units, and a hidden layer has 27 units. We trained 216 color-samples, and estimated the realized color transform system by 1115 color-samples. The average color difference between original color samples and transformed color samples was 2.54.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.2
• /
• pp.171-181
• /
• 1988

In this study, a packet voice/data terminal(PVDT) that services both voice and data in the packet-switched network is implemented. The software structure of the PVDT is designed according to the OSI 7 layer architecture. The discrimination of voice and data is made in the link layer. Voice packets have priority over data packets in order to minimize the transmission delay, and are serviced by a simple protocol so that the overhead arising form the retransmission of packets may be minimized. The hardware structure of the PVDT is divided into five modules; a master control module, a speech proessing module, a speech activity detection module, a telephone interface module, and an input/output interface module. In addition to the hardware implementation, the optimal reconstruction delay of voice packets to reduce the influence of delay variance is analyzed.

• Journal of The Korean Astronomical Society
• /
• v.47 no.6
• /
• pp.209-214
• /
• 2014

In this study we develop a set of solar proton event (SPE) forecast models with NOAA scales by Multi Layer Perceptron (MLP), one of neural network methods, using GOES solar X-ray flare data from 1976 to 2011. Our MLP models are the first attempt to forecast the SPE scales by the neural network method. The combinations of X-ray flare class, impulsive time, and location are used for input data. For this study we make a number of trials by changing the number of layers and nodes as well as combinations of the input data. To find the best model, we use the summation of F-scores weighted by SPE scales, where F-score is the harmonic mean of PODy (recall) and precision (positive predictive value), in order to minimize both misses and false alarms. We find that the MLP models are much better than the multiple linear regression model and one layer MLP model gives the best result.

• Journal of Welding and Joining
• /
• v.13 no.3
• /
• pp.77-88
• /
• 1995

A prediction method for determining the welding residual stress by artificial neural network is proposed. A three-dimensional transient thermomechanical analysis has been performed for the CO$_{2}$ arc welding using the finite element method. The first part of numerical analysis performs a three-dimensional transient heat transfer analysis, and the second part then uses the results of the first part and performs a three-dimensional transient thermo-elastic-plastic analysis to compute transient and residual stresses in the weld. Data from the finite element method are used to train a backpropagation neural network to predict the residual stress. Architecturally, the fully interconnected network consists of an input layer for the voltage and current, a hidden layer to accommodate the ailure mechanism mapping, and an output layer for the residual stress. The trained network is then applied to the prediction of residual stress in the four specimens. It is concluded that the accuracy of the neural network predicting method is fully comparable with the accuracy achieved by the traditional predicting method.

• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.21-28
• /
• 2005

The training and prediction modeling using an artificial neural network was implemented to predict the turbidity of treated water as well as to estimate the optimized feed concentration of polyaluminium chloride (PACl) in a water treatment plant. The parameters used in the input layers were pH, temperature, turbidity and alkalinity, while those in output layers were PACl and turbidity of treated water. Levenberg-Marquadt method of feedforward back-propagation perceptron in the neural network toolbox of MATLAB program was used in this study. Correlation coefficients of the training data with the measured data were 0.9997 for PACl and 0.6850 for turbidity and those of the testing data with measured data were 0.9140 for PACl and 0.3828 for turbidity, when four parameters at input layer, 12-12 nodes each at both the first and the second hidden layers, and two parameters(PACl and turbidity) at output layer were used. Although the predictability of PACl was improved, compared to that of the previous studies to use the only coagulant dose as output layer, turbidity in treated water could not be predicted well. Acquisition of more data through several years obtained with the advanced on-line measuring system could make the artificial neural network useful and practical in actual water treatment plants.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.591-593
• /
• 1995

Artificial neural network based pattern recognition method is one of the most probable candidate for on-line power system transient stability analysis. Especially, Kohonen layer is an adequate neural network for the purpose. Each node of Kehonen layer competes on the basis of which of them has its clustering center closest to an input vector. This paper discusses Kohonen's LVQ(Learning Victor Quantization) and points out a defection of the algorithm when applied to the transient stability analysis. Only the clustering centers located near the decision boundary of the stability region is needed for the stability criterion and the centers far from the decision boundary are redundant. This paper presents a new algorithm ratted boundary searching algorithm II which assigns only the points that are near the boundary in an input space to nodes or Kohonen layer as their clustering centers. This algorithm is demonstrated with satisfaction using 4-generator 6-bus sample power system.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.5
• /
• pp.245-256
• /
• 2017

This paper proposes a method to generate test scripts for testing embedded system in an easy manner by using hierarchical checklist. In the proposed method, a checklist is constructed with event, component and command dictionaries. And the test scripts are hierarchically generated based on the dictionaries. Since the physical layer of system input becomes abstract with component layer and event layer by virtue of the hierarchy, It is possible to generate test scripts without complicated system input information. It is easy to generate test scripts for embedded systems with similar inputs using the highly reusable dictionaries. The effectiveness of the proposed method is demonstrated with experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.1
• /
• pp.90-97
• /
• 2004

DC motor requires a rotor speed sensor for accurate speed control. The speed sensors such as resolvers and encoders are used as speed detectors. but they increase cost and size of the motor and restrict the industrial drive applications. So in these days. many Papers have reported on the sensorless operation or DC motor(3)-(5). This paper Presents a new sensorless strategy using neural networks(6)-(8). Neural network structure has three layers which are input layer. hidden layer and output layer. The optimal neural network structure was tracked down by trial and error and it was found that 4-16-1 neural network has given suitable results for the instantaneous rotor speed. Also. learning method is very important in neural network. Supervised learning methods(8) are typically used to train the neural network for learning the input/output pattern presented. The back-propagation technique adjusts the neural network weights during training. The rotor speed is gained by weights and four inputs to the neural network. The experimental results were found satisfactory in both the independency on machine parameters and the insensitivity to the load condition.