• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.78-80
• /
• 2006

The hybrid thin-film (HTF) passivation layer composed of the Ultra Violet (UV) curable acrylate layer and MS-31 (MgO:$SiO_2$=3:1wt%) layer was adopted in organic light emitting device (OLEO) to protect organic light emitting materials from penetrations of oxygen and water vapors. The results showed that the HTF layer possessed a very low WVTR value of lower than $0.007gm/m^{2+}day$ at $37.8^{\circ}C$ and 100% RH. This value was within the limited range of the sensitivity of WVTR measurements. And the lifetime of the HTF passivated device became almost three times longer than that of the bare device. The HTF on the OLEO was found to be very effective in protect what from the penetrations of oxygen and moisture.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.257-257
• /
• 2010

One of the critical issues for applications of flexible organic thin film transistors (OTFTs) for flexible electronic systems is the electrical stabilities of the OTFT devices, including variation of the current on/off ratio ($I_{on}/I_{off}$), leakage current, threshold voltage, and hysteresis, under repetitive mechanical deformation. In particular, repetitive mechanical deformation accelerates the degradation of device performance at the ambient environment. In this work, electrical stabilities of the pentacene organic thin film transistors (OTFTs) employing multi-stack hybrid encapsulation layers were investigated under mechanical cyclic bending. Flexible bottom-gated pentacene-based OTFTs fabricated on flexible polyimide substrate with poly-4-vinyl phenol (PVP) dielectric as a gate dielectric were encapsulated by the plasma-deposited organic layer and atomic layer deposited inorganic layer. For cyclic bending experiment of flexible OTFTs, the devices were cyclically bent up to $10^5$ times with 5mm bending radius. In the most of the devices after $10^5$ times of bending cycles, the off-current of the OTFT with no encapsulation layers was quickly increased due to increases in the conductivity of the pentacene caused by doping effects from $O_2$ and $H_2O$ in the atmosphere, which leads to decrease in the $I_{on}/I_{off}$ and increase in the hysteresis. With encapsulation layers, however, the electrical stabilities of the OTFTs were improved significantly. In particular, the OTFTs with multi-stack hybrid encapsulation layer showed the best electrical stabilities up to the bending cycles of $10^5$ times compared to the devices with single organic encapsulation layer. Changes in electrical properties of cyclically bent OTFTs with encapsulation layers will be discussed in detail.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.310-321
• /
• 2019

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.119-128
• /
• 2022

Recent advancement of Internet of Things (IoT) and energy harvesting technology enable realization of flexible thermoelectric energy harvester (f-TEH), with technological prowess for use in biomedical monitoring system integrated applications. To expand a flexible thermoelectric energy harvesting platform, the f-TEH must be required for optimized flexible thermoelectric materials and device structure. In response to these demands related to thermoelectric energy harvesting, many research groups have investigated various f-TEHs applied as a power source for wearable electronics. As a key member of the f-TEH, film-based f-TEHs possess significant applicability in research to realize self-powered wearable electronics, owing to their excellent flexibility, low thermal conductivity, and convenient fabrication process. Thus, based on the rapid growth of thermoelectric film technology, this review aims to overview comprehensively the f-TEH made of various inorganic/organic thermoelectric materials including developed fabrication methods, high thermoelectric performance, and wide-range applications.

• Current Photovoltaic Research
• /
• 제12권1호
• /
• pp.1-5
• /
• 2024

Perovskite solar cells have exhibited a remarkable increase in efficiency from an initial 3.8% to 26.1%, marking a significant advancement. However, challenges persist in the commercialization of perovskite solar cells due to their low stability with respect to humidity, light exposure, and temperature. Moreover, the instability of the organic charge transport layer underscores the need for exploring inorganic alternatives. In the manufacturing process of the perovskite solar cells' oxide charge transport layer, ultraviolet-ozone (UVO) treatment is commonly applied to enhance the wettability of the perovskite solution. The UVO treatment on metal oxides has proven effective in suppressing surface oxygen vacancies and removing surface organic contaminants. This study focused on the characterization of nickel oxide as the hole transport material in perovskite solar cells, specifically investigating the impact of UVO treatment on film properties. Through this analysis, changes induced by the UVO treatment were observed, and consequent alterations in the device characteristics were identified.

• 한국토양비료학회지
• /
• 제45권6호
• /
• pp.949-954
• /
• 2012

시설재배지 토양의 축적양분인 염류를 활용하기 위해 EC가 높은 토양에 여러 킬레이트제를 처리하여 토양의 화학성과 작물의 무기성분 흡수량을 비교 분석하였다. DTPA와 EDTA를 처리한 구에서 킬레이트제는 Ca, Mg, K, P등의 다량원소 뿐만 아니라 Fe, Cu, Mn, Zn 등의 미량원소와 킬레이트 하는 능력이 뛰어났다. 그러나, 토양의 ECDTPA를 처리한 는 EDTA를 처리한 토양보다 낮아졌다. 킬레이트제가 처리된 토양에서 생육한 배추의 무기성분 흡수량을 살펴본 결과 DTPA 0.5 mM 처리한 구에서 배추의 T-N, $P_2O_5$, $K_2O$, 그리고 Fe의 흡수량은 다른 처리구보다 높았다. 이로부터 시설재배지의 집적된 양분을 킬레이트화하여 작물의 양분 이용성을 증대하는 데 효과적인 킬레이트제는 DTPA이며, 적정한 농도는 0.5 mM로 나타났다.

• 한국환경농학회지
• /
• 제31권4호
• /
• pp.293-299
• /
• 2012

본 연구에서는 화학비료와 퇴비를 과다하게 투입하여 인산의 집적 및 유출 위험성이 높은 양파-벼 재배지와 시설재배지의 인산 집적 특성과 인산가수분해효소를 이용한 집적 인산의 수계에서의 생물이용가능성을 평가하였다. 수용성 인산 중 많은 부분의 유기태 인산이 주변 수계에 유출될 위험성이 높았지만 그동안 제대로 평가되지 못했다. 본 연구결과에서 alkaline phosphomonoesterase와 phosphodiesterase에 의해 이모작토양에서 DUP의 12, 24%가 시설재배지 토양에서 DUP의 18과 44%가 분해되는 것으로 나타났다. 토양에 축적된 유기태 인산중 orthophosphate monoester와 diester가 주로 인산분해효소에 의해 분해되어 농경지 주변 수계로 유출시 생물 이용 가능성이 큰 것으로 평가되었다. 따라서 수계에서 인산의 거동을 이해할 때 유기태 인산에 대한 충분한 고려가 필요할 것이다.

• 한국음향학회지
• /
• 제16권2호
• /
• pp.89-94
• /
• 1997

아황산가스를 감지하기 위해 새로운 CdS 무기박막을 이용한 표면탄성파 센서를 구현하였다. LiTaO$_3$ 단결정 압전기판에 중심주파수 54MHz인 두 개의 SAW 소자 및 발진기를 제작하였으며 아황산가스가 흡착, 탈착할 수 있는 감지막을 지연선 상에 증착시키고 다른 변수로부터의 반응을 보상하기 위해 이중지연선 구조로 제작하였다. CdS 박막은 초음파 노즐을 이용하여 분무 열분해법을 이용하여 증착하였다. 실험결과 표면탄성파 센서는 아황산가스의 농도를 0.25 ppm 까지 검출할 수 있으며 20 ppm 이내의 안정도 및 5분 이내의 빠른 반응시간을 보였다. 또 가스감응 실험의 반복을 통해 센서의 반복성을 확인함으로써 본 연구에서 개발한 센서가 이황산가스 감지용 센서로 사용될 수 있음을 확인하였다. 향후 계획으로 CdS 박막 증착시에 적절한 원소를 첨가하여 박막의 반응성을 증가시키며 또한 표면탄성파 소자의 중심주파수를 증가시켜 센서의 가스감응성을 높이고자 하였다.

• 새물리
• /
• 제68권11호
• /
• pp.1208-1214
• /
• 2018

단일 스텝 스핀 코팅 (one-step spin coating) 공정은 $MAPbI_3$ 페로브스카이트 (Perovskite) 박막의 결정화가 우수하여 고효율 태양 전지 제작이 가능하다. 이 공정의 핵심은 솔벤트 증발 제어 공정을 사용하는 것인데, 이는 스핀 코팅 시 $MAPbI_3$ 의 용해도를 증가 시킬 수 있는 용매를 투입하는 (dripping) 방식이다. 본 연구에서 용매의 양, 투입속도 및 시간에 따라 생성되는 $MAPbI_3$의 특성을 분석하고, 이렇게 만들어진 박막을 이용한 태양 전지 특성을 조사하였다. $MAPbI_3$ 박막 형성을 위하여 lead iodide, methyl-ammonium iodide를 N,N-dimethylformamide에 녹이고, N,N-dimethyl sulfoxide를 첨가하여 용액을 만들었으며, 증발 제어 공정을 위한 용매로 diethyl ether (DE)를 사용하였다. DE의 투입 조건에 따라 $MAPbI_3$ 박막 형성 시 핵 생성에 차이가 생기고, 이는 $MAPbI_3$의 결정화, 밀도 및 표면 상태에 영향을 미치는 것으로 나타났으며, 이에 따라 태양 전지의 효율이 달라지는 것을 알 수 있었다. 0.7 mL의 DE의 양, 3.03 mL/sec 투입 속도, 7초(스핀 코팅 시작 후 투입시간)의 솔벤트 증발 제어 공정 결과 최대 13.74% 효율을 가지는 태양 전지 소자를 재현성 있게 관측할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.4027-4034
• /
• 2011

$CaCO_3$ crystalline structures having novel assemblies were in situ fabricated as analogs of naturally occurring proteins and polysaccharides for biomineralization. The calcite crystal was mineralized in a poly(vinyl alcohol)-$Ca^{2+}$ complex film immersed in a $Na_2CO_3$ solution containing poly(aspartic acid). The morphology and size of the $CaCO_3$ crystals were tuned by varying the concentration of poly(aspartic acid). The mechanisms of their nucleation orientation and formation were investigated experimentally and through molecular dynamics (MD) simulations in order to obtain a better understanding of the interactions between the polymers and the crystal at the molecular level. Both the MD results and experimental results indicate that the interaction between PVA and calcite mainly depends on the concentration of the polymer. The novel approach proposed herein for the fabrication of inorganic crystalline assembly structures can be used to fabricate precise crystalline structures.