• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.23-36
• /
• 2008

This study describes model tests on instrumented rectangular-shaped passive row piles embedded in horizontal sand-ground undergoing lateral soil movement. We tried to find the property of row piles dependent on the shape of pile, including the position of the pile in row, pile spacing, and soil movement. The results of test are as follows. The lateral earth pressure diagram variously appeared to be triangle, trapezoid and rectangular by shape and position of pile. The outer pile has a larger bending moment than the inner pile in the case of B-type, the inner piles has larger one than outer pile in case of H-type. $R_f$ (the ratio of resistance to lateral soil movement) was found to increase with increasing pile spacing irrespective of pile-shape. Y/L (location of action of lateral resistance force) for $d_s$ (displacement of soil) and $S_h$ (spacing of pile) appeared to be nearly regular position, and H-type is higher than B-type.

• Korean Institute of Interior Design Journal
• /
• no.38
• /
• pp.108-115
• /
• 2003

Between 1890-1914, the fundamental changes of the housing in United Sates of America were provoked to attempt the housing developments to adapt modern social system. The worthy of notice is that F L. Wright's Prairie House had been tested and built during the period as 'the first and second era' Despite the transition period in America, this represents that Wright's Prairie House series were developed. There are possibilities that some of the reformers assertion for Housing Development, on behalf of Arts & Crafts Movement, led to Wright's early house inner space design. For this reason, this study is to examine Ideologies that Wright has been accepted between the turning point of America's Arts & Crafts Movement and Hull House Circle. In terms of the ideologies acceptance, the study is also to examine how to be represented his inner space design characteristics. As the result, between'Simplification'housing development and the traditional housing In America, F L. Wright sublimated his own architectural aesthetic as accepting all functional elements to consider inevitability in this period, such as the association between economical and rational space, the plan to led on free plane, the spatial side and the stability of family life and the community, through the unification space having the consecutiveness.

• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.131-140
• /
• 2001

This study was conducted to develop a garlic separator which could to reduce the labor in preparation of seeding. After consideration of the design criteria of a garlic separator such as no additional conveying device, simple construction and operation, enhancement of separating efficiency, reduction of damage, degree a rotating corn type garlic separator was designed. The effects of design parameters such as height and angle of the inner and outer corns, rotating speed of inner corn on the separating performance of the prototype were estimated. In performance was compared with manual work. The results are summarized as follows. 1. Garlic bulbs were separated by a spiral movement in the gap between inner rotating corn and outer fixed corn. At constant feed rate of garlic bulbs, the capacity of garlic separation increased with increase of rotating speed of inner corn. Especially, the capacity was very high at the rotating speeds of 300 and 400rpm. 2. The damage degree of separated garlics increased with rotating speed of corn within 10%. Above 300rpm, separability of Uisung garlic was about 100% and incomplete separation of Namdo garlic was within 2%. 3. The capacity of prototype garlic separator developed in this study was 30 times as large as that of human being.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.70-74
• /
• 2008

In the field of camera motion research, it is widely held that the position (movement) and pose (rotation) of cameras are correlated and cannot be independently separated. A new equation based on inner product is proposed here to independently separate the position and pose. It is proved that the position and pose are not correlated and the equation is applied to estimation of the camera exterior parameters using a real image and 3D data.

• Tribology and Lubricants
• /
• v.36 no.2
• /
• pp.64-67
• /
• 2020

In the conventional gerotor design, the circular arc tooth of the outer rotor is first introduced, and then the inner rotor profile is generated by simulating the outer rotor motion while the inner rotor is fixed. The profile generation of tooth meshing exhibits relativity; therefore, the outer rotor profile can be generated by the movement of the inner rotor. In this study, we propose the design of a gerotor with a pin-tooth inner rotor. First, the pin-tooth inner rotor is devised, and then the outer rotor profile is generated. The profile of the inner rotor is simply composed of equally arranged pins along a circle. The root of the inner rotor is designed as a conjugated arc of two pins. The trajectory of the pin center is obtained by the inner rotor operation, and then the outer rotor profile is determined as a parallel curve of the trajectory. In this gerotor design, the inner rotor has a simple configuration, and contact occurs between the pin parts of the inner rotor and the whole profile of the outer rotor. This affects the material selection and machining process. The pin tooth can be used to design the outer and inner rotors, enabling a double gerotor mechanism corresponding to a planetary gear system.

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.121-129
• /
• 2004

The purpose of this study was to photoelastically visualize 4he distribution of fortes transmitted to the alveolus and surrounding structures using three different types of headgear for the distal movement of the upper molars. A photoelastic maxillary model was made and three different directional forces applied, which were high-pull, straight-pull, and cervical-pull. Stress distribution was recorded through circular polariscope, and two-dimensional photoelastic stress analysis was performed according to isochromatic fringe characteristics. The results were as follows: 1. In the case of high-pull headgear bodily movement occurred in the medium- length outer bow, stress distribution in the apical region was 1st molar, 2nd premolar, lst premolar in sequence and there was no apparent difference. 2. In the case of straight-pull headgear, bodily movement occurred in the long outer bow and stress distribution in the apical region was heavy in the 1st molar, 2nd premolar, 1st premolar in sequence. But. there were no apparent differences according to the length of the outer bow. 3. In the case of cervical- pull headgear, bodily movement also occulted in 4he long outer bow, and apical stress of the premolar region was heaviest among other cases and apical stress of the 2nd premolar was heaviest in the short outer bow. In clinical situations, to achieve bodily movement of the upper 1st molars without modifying outer bow height, applying an outer bow length as long as the inner bow length in high-pull headgear and applying an outer bow length longer than the inner bow length in straight-pull, cervical-pull headgear are recommended.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.31-34
• /
• 2008

The L-bending of inner-structure bonded sandwich sheet metal is examined to reduce springback and defects of bent parts. The specimen is composed of top and bottom layers and a middle layer with dimple type-inner-structure and each layer is bonded by resistance welding. This specimen with hollow type-inner-structure shows different bending characteristics from the conventional sandwich sheet metals with solid type-inner-structure. The experiments were conducted for two kinds of working conditions, that is, clearance and movement of first bent specimen for second bending. The deformed profile, bend angle and springback were investigated and compared and then the proper working conditions for L-bending of sandwich sheet metal were prosed.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.672-679
• /
• 2013

Creativity is the thinking ability and the expression of new image by imagination as a problem recognition and way of solution. This study aims to search for the creativity theory of body movement and to analyze the creativity factor. According to the study, the creativity of body movement needs four steps: movement awareness, movement design, movement discovery and movement use. The use of new image through self-perception and self concept brings about a creative improvement in the problem recognition and its resolution function. In conclusion, the creativity of body movement means the infinity of body movement as 'the third energy' and 'the flexibility of flow' by interaction.

• Journal for History of Mathematics
• /
• v.27 no.2
• /
• pp.139-152
• /
• 2014

This paper aims to compare and contrast Kierkegaard and Turing, whose birth dates were one hundred years apart, analyzing them from the perspective of the limit. The model of analysis is two concentric circles and movement in them and on the boundary of outer circle. In the model, Kierkegaard's existential stages have 1:1 correspondences: aesthetic stage, ethical stage, religious stage A and religious stage B correspond to inside of the inner circle, outside of the inner circle, the boundary of the outer circle and the outside of the outer circle, respectively. This paper claims that Turing belongs to inside of the outer circle and moves to the center while Kierkegaard belongs to outside of the outer circle and moves to the infinity. Both of them have movement of potential infinity but their directions are opposite.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.29-33
• /
• 2000

The purpose of this paper is to determine the effect of the autoclave inner pressure rate, heat-up rate, tool round angle, Thickness of core, height of joggle on defects, and to minimize the defects of aircraft sandwich structure reinforced with honeycomb core occurred in autoclave processing. The results showed that the geometry of aircraft sandwich structure and tool such as tool round angle, Thickness of core, height of joggle, and the autoclave cure conditions such as inner pressure rate, heat up rate strongly affected the core movement, core wrinkle, bridge phenomenon of prepreg and depression of core that occurred in autoclave processing.