• 한국주거학회논문집
• /
• 제8권3호
• /
• pp.219-230
• /
• 1997

Lack of technical standards, specification and inadequate execution in masonry wall construction in Korea lead to produce serious flaw problems such as crack, efflorescene, and upset etc.. The purpose of this paper is to present the practical details for Masonry cavity wall construction to prevent rain penetration and to accommodate differential movement between the inner and outer wythes of cavity walls. Considering rain penetration and differential movement of both wythes of cavity walls, provision of an adequate air space, an airtight back-up wall, clean cavity with weepholes and vents, properly positioned flashing, tie and shelf angle etc. depend on the cavity wall types will help ensure good performance. The present details included noncorrosive hot dip galvanized steel or stainless steel for metal components, plastic and ultra violet resistant polypropylene Copolymer for other components was taken into account the construction method and several types of cavity walls in Korea

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.710-717
• /
• 1998

The pH changes in 3 cavities prepared at the facial inner dentin and lingual outer dentin of the cervical portion and apical portion of roots filled with calcium hydroxide containing sealers were investigated. 50 extracted permanent teeth with single canal were instrumented with step-back method. An irrigant of 5% NaOCl was used between files. Then 3 small cavities were prepared. The cavity of apical portion and inner dentin cavity of coronal portion was cut a distance of about 1.0mm from the canal wall and outer dentin cavity of coronal portion was cut to a depth of about 0.5mm from root surface. 10 teeth of control group was not filled. 20 teeth were not flushed with 17% EDTA before using root canal sealers and then divided into 2 groups obturated with Sealapex and Apexit. The remaining 20 teeth were flushed with 17% EDTA and 5% NaOCl to remove smear layer and divided into 2 groups obturated with Sealapex and Apexit. The pH change of the dentin in each cavity was measured at 0, 1, 3, 5, 7, 15, 30 days with pH microelectrode(WPI Co., USA). The results were as follows: 1. The groups obturated with Sealapex and Apexit(calcium hydroxide based-sealers) have no increase in the pH level at root dentin. And there is no significant difference in pH level between groups obturated with Sealapex and Apexit(P>0.05). 2. Differences in pH levels between the treated and untreated groups with EDTA were not significant(P>0.05). 3. There is no significant difference in pH level between apical and cervical dentin, inner and outer dentin throughout the duration of the experiment(P>0.05).

• 설비공학논문집
• /
• 제29권1호
• /
• pp.21-28
• /
• 2017

Curtain-wall systems have been widely applied to buildings because of their lightweight and constructability characteristics. However, as curtain-wall systems include many building materials, vapor barriers can become damaged and condensation can occur. Due to the material properties of stone curtain-walls, the external appearance and structure of a building could be damaged and the insulating performance of the curtain-wall could be worse. Natural ventilation using an air cavity in a curtain-wall is expected to be effective for the prevention of condensation in inner walls and for the reduction of building cooling energy use in the summer. The purpose of this experimental study is to analyze the influence of a ventilated cavity on the insulating performance of a curtain-wall and the ventilated cavity depth and ratio of top opening needed to prevent condensation in a curtain-wall.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.164-167
• /
• 2003

본 연구에서는 무선부품의 일종인 cavity filter금형을 제작하여 도금용 ABS 수지와 PC/ABS alloy 수지를 사용하여 일반사출성형과 금형온도가 높은 MmSH방식, 두 타입으로 성형품을 제작하였다. 성형품의 수축률 변화는 MmSH 방식일 때 ABS 성형품의 단위캐비티 격막부분에서 수축률이 감소되었다. 중량변화는 ABS와 PC/ABS 성형품 모두 MmSH 방식일 때 증가하였고, 성형품 표면 거칠기는 MmSH 방식일 때 모두 거칠기가 감소되었다.

• Geomechanics and Engineering
• /
• 제20권5호
• /
• pp.399-410
• /
• 2020

Cavities often develop behind the vault during the construction of double-arch tunnels, generally in the form of various defects. The study evaluates the impact of cavities behind the vault on the mechanical and failure behaviors of double-arch tunnels. Cavities of the same sizes are introduced at the vault and the shoulder close to the central wall of double-arch tunnels. Physical model tests are performed to investigate the liner stress variation, the earth pressure distribution and the process of progressive failure. Results reveal that the presence of cavities behind the liner causes the re-distribution of the earth pressure and induces stress concentration near the boundaries of cavities, which results in the bending moments in the liner inside the cavity to reverse sign from compression to tension. The liner near the invert becomes the weak region and stress concentration points are created in the outer fiber of the liner at the bottom of the sidewall and central wall. It is suggested that grouting into the foundation soils and backfilling injection should be carried out to ensure the tunnel safety. Changes in the location of cavities significantly impact the failure pattern of the liner close to the vault, e.g., cracks appear in the outer fiber of the liner inside the cavity when a cavity is located at the shoulder close to the central wall, which is different from the case that the cavity locates at the vault, whereas changes in the location of cavities have a little influence on the liner at the bottom of the double-arch tunnels.

• 한국전자현미경학회:학술대회논문집
• /
• 한국현미경학회 2007년도 제38차 춘계학술대회 초록집
• /
• pp.75-78
• /
• 2007

The localization of cellulase were investigated in the capitate glandular trichomes of Pelargonium ${\times}$ fragransby a transmission electron microscopy. The secretory cells of capitate trichomes involved in biosynthesis and its secretion. Secretory material is transported to the space between the plasma membrane and cell wall, and subsequently accumulated in the secretory cavity. The splitting of secretory cell wall during the formation of secretory cavity is suggested that wall-forming enzymes, such as cellulase, may contribute to the wall separation process. Cellulase reaction product was localized in the secretory cell, the secretory cavity and in the subcuticular wall of glandular trichomes. Reaction products were present over fibrillar matrix in the secretory cavity associated with both the inner wall and the subcuticular wall.

• Structural Engineering and Mechanics
• /
• 제35권4호
• /
• pp.409-430
• /
• 2010

The present paper will be concerned to the investigation of the stress-strain field around the cavity that is loaded or partially loaded at the inner surface by the rotationally symmetric loading. The cavity of the spherical, cylindrical or elliptical shape is situated in a stressed elastic continuum, subjected to the gravitation field. As the contribution to the similar investigations, the paper introduces the new function of loading in the form of the infinite sine series. Besides, in this paper the solution of stresses around an oblong ellipsoid cavity, has been obtained using appropriate curvilinear elliptical coordinates. This analytical approach avoids the solutions of the same problem that lead to expressions that contain rather complex integrations. Thus the presented solutions provide the applicable and explicit expressions for stresses and strains developed in infinite series with easily determinable coefficients by the use of contemporary mathematical packages. The numerical examples are also included to confirm the convergence of the obtained solutions.

• 대한수의학회지
• /
• 제44권2호
• /
• pp.303-310
• /
• 2004

To establish a prediction table of parturition day real-time B-mode ultrasonographic examinations were performed in 12 pregnant Shih-tzu bitches. Measurement of inner chorionic cavity diameter and fetal head diameter was performed from 15 days of gestation to parturition. These were converted retrospectively based on the day of parturition (Day 0). The data of inner chorionic cavity diameter obtained from Day -44 to Day -25 and fetal head diameter obtained from Day -25 to Day -1 were used to compile a prediction table of parturition day. The 22 pregnant Shih-tzu with unknown mating time were examined to assess an accuracy of the table established in this study. And these results were applied to the prediction of parturition day and compared to actual parturition day. Parturition day prediction based on the inner chorionic cavity diameter and fetal head diameter was 100% accurate within ${\pm}2$ days. In addition, the accuracy for parturition day within 0, ${\pm}1$, and ${\pm}2$ days interval using the prediction table of parturition day were 68, 82, and 100%, respectively. Therefore, the prediction table of parturition day seems to be a useful tool for the prediction of parturition day in practice.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.176-180
• /
• 2001

For windshield defrosting, flow analysis of inner room(vehicle) and heat conduction on the windshield surface are undertaken. Simulation for defrosting enthalpy method is usedand verification of heat and fluid flow analysis for room is done in cavity flow. The defrosting process is three dimensional phenomena and phase is changing. The result of defrosting analysis are well presenting the phase change and these results offer basic design data for defrosting phenomena.

• Applied Microscopy
• /
• 제30권2호
• /
• pp.141-152
• /
• 2000

본 연구의 목적은 $CdCl_2$이 간 미세조직에 일으키는 독성에 대한 50의 억제효과를 연구하는데 있다. 본 실험에서는 총 40마리의 건강한 ICR계 mouse를 사용하였다. 실험군은 먼저 2개군(group A, and B)으로 구분하였다. A군에는 $CdCl_2$(40mg/kg)을 복강투여 하였다. B군에는 SQ (180 mg/kg, 2회/일)과 $CdCl_2$ (4.0 mg/kg)을 동시 복강 투여하였다. 각 군은 24, 48, 72, 96시간째에 관찰하여 다음과 같은 결과를 얻었다. 1. A군 : 핵막은 24시간대에서 매우 불규칙하게 관찰되었고, 48시간대부터는 대체로 원형을 유지하였다. 사립체는 72시간까지 내강이 파괴된 채로 관찰되었고, 96시간대에는 일부에서만 내강 파괴가 관찰되었다. 과립형질 내세망은 내강이 전 시간대에 걸쳐 팽대된 소견을 보였고, 72시간대부터 층판구조를 형성하였다. 용해소체가 24 시간대부터 세포질에서 관찰되었고, 72시간대부터는 글리코겐이 관찰되었다. 2. B군 : 핵막은 전 시간대에 걸쳐 비교적 규칙적인 형태를 보였다. 사립체는 전반적으로 원형 ,세장형 등 정상적인 형태로 관찰되었다. 과립형질내세망은 48시간군에서 내강이 팽대되었고 층판구조가 일부 분절된 소견을 보였지만, 72시간부터는 전형적인 층판구조가 관찰되었다. 용해소체와 glycogen은 24시간대부터 관찰되었다. 이상의 결과를 종합하면 50이 mouse간세포에 미치는 카드뮴의 독성을 감소시키는 것으로 사료된다.