• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.1
• /
• pp.48-57
• /
• 2020

MCU used in applications such as wireless chargers and USB type-C require MTP memory with a small cell size and a small additional process mask. Conventional double poly EEPROM cells are small in size, but additional processing masks of about 3 to 5 sheets are required, and FN tunneling type single poly EEPROM cells have a large cell size. In this paper, a 110nm MTP cell using a vertical PIP capacitor is proposed. The erase operation of the proposed MTP cell uses FN tunneling between FG and EG, and the program operation uses CHEI injection method, which reduces the MTP cell size to 1.09㎛2 by sharing the PW of the MTP cell array. Meanwhile, MTP memory IP required for applications such as USB type-C needs to operate over a wide voltage range of 2.5V to 5.5V. However, the pumping current of the VPP charge pump is the lowest when the VCC voltage is the minimum 2.5V, while the ripple voltage is large when the VCC voltage is 5.5V. Therefore, in this paper, the VPP ripple voltage is reduced to within 0.19V through SPICE simulation because the pumping current is suppressed to 474.6㎂ even when VCC is increased by controlling the number of charge pumps turned on by using the VCC detector circuit.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.438-444
• /
• 2011

Purpose: Adipose-derived stromal cells (ASCs) are readily harvested from lipoaspirated tissue or subcutaneous adipose tissue fragments. The stromal vascular fraction (SVF) is a heterogeneous set of cell populations that surround and support adipose tissue, which includes the stromal cells, ASCs, that have the ability to differentiate into cells of several lineages and contains cells from the microvasculature. The mechanisms that drive the ASCs into the osteoblast lineage are still not clear, but the process has been more extensively studied in bone marrow stromal cells. The purpose of this study was to investigate the osteogenic capacity of adipose derived SVF cells and evaluate bone formation following implantation of SVF cells into the bone defect of human phalanx. Methods: Case 1 a 43-year-old male was wounded while using a press machine. After first operation, segmental bone defects of the left 3rd and 4th middle phalanx occurred. At first we injected the SVF cells combined with demineralized bone matrix (DBM) to defected 4th middle phalangeal bone lesion. We used P (L/DL)LA [Poly (70L-lactide-co-30DL-lactide) Co Polymer P (L/DL)LA] as a scaffold. Next, we implanted the SVF cells combined with DBM to repair left 3rd middle phalangeal bone defect in sequence. Case 2 was a 25-year-old man with crushing hand injury. Three months after the previous surgery, we implanted the SVF cells combined with DBM to restore right 3rd middle phalangeal bone defect by syringe injection. Radiographic images were taken at follow-up hospital visits and evaluated radiographically by means of computerized analysis of digital images. Results: The phalangeal bone defect was treated with autologous SVF cells isolated and applied in a single operative procedure in combination with DBM. The SVF cells were supported in place with mechanical fixation with a resorbable macroporous sheets acting as a soft tissue barrier. The radiographic appearance of the defect revealed a restoration to average bone density and stable position of pharyngeal bone. Densitometric evaluations for digital X-ray revealed improved bone densities in two cases with pharyngeal bone defects, that is, 65.2% for 4th finger of the case 1, 60.5% for 3rd finger of the case 1 and 60.1% for the case 2. Conclusion: This study demonstrated that adipose derived stromal vascular fraction cells have osteogenic potential in two clinical case studies. Thus, these reports show that cells from the SVF cells have potential in many areas of clinical cell therapy and regenerative medicine, albeit a lot of work is yet to be done.

• Journal of Veterinary Clinics
• /
• v.19 no.3
• /
• pp.342-349
• /
• 2002

Vitamin D is one of important factors involved in the regulation of bone metabolism. In osteoporosis, the therapeutic effect of vitamin D on the healing process has still been controversial. To conform the effect of $1{\alpha}$, 25 dihydroxy-vitamin $D_3$ on osteoporosis, the change of serum calcium, serum phosphorus, serum alkaline phosphatase, bone mineral density and bone mineral content of osteoporotic tibia were examined comparatively in normal control group(positive control), CFA control(negative control), CFA+$1{\alpha}$, 25 dihydroxy-vitamin $D_3$ 0.01 ug/kg group and CFA+$1{\alpha}$, 25 dihydroxy-vitamin $D_3$ 0.1 ug/kg group after osteoporosis was induced by single injection of complete Freund's adjuvant(CFA) in rats. In change of serum calcium. the significantly increased value was shown on 2nd and 5th week(P< 0.05) after treatment in $1{\alpha}$, 25 dihydroxy-vitamin D$_3$ 0.01 ug/kg group and on 3rd week(P<0.05) after treatment in $1{\alpha}$, 25 dihydroxy-vitamin $D_3$ 0.1 ug/kg group than CFA control. In change of serum phosphorus, the significantly increased value was shown on 2nd week(P<0.05) after treatment in $1{\alpha}$, 25 dihydroxy-vitamin $D_3$ 0.01 ug/kg group and on 3rd and 4th week(P<0.05) after treatment in $1{\alpha}$, ,25 dihydroxy-vitamin $D_3$ 0.1 ug/kg group than CFA control. The value of bone mineral density and bone mineral content of tibia was increased in both $1{\alpha}$,25 dihydroxy-vitamin $D_3$ 0.01 ug/kg group and $1{\alpha}$, 25 dihydroxy-vitamin $D_3$ 0.1 ug/kg group than CFA control, and the increase rate of that was higher in $1{\alpha}$, 25 dihydroxy-vitamin $D_3$ 0.1 ug/kg group than $1{\alpha}$, 25 dihydroxy-vitamin $D_3$ 0.01 ug/kg group. Considering above findings collectively, it was considered that $1{\alpha}$, 25 dihydroxy-vitamin $D_3$ was effective in preventing the complete Freund's adjuvant-induced osteoporotic decrease of bone mass.

• Biomolecules & Therapeutics
• /
• v.14 no.4
• /
• pp.253-258
• /
• 2006

LDD175(4-choloro-7-trifluoromethyl-10H-benzo[4,5]furo[3,2-b]indole-l-carboxylic acid) is one of benzofuroindole derivatives that act as a potent $BK_{Ca}$ channel openers. In the process of testing LDD175 as a new drug candidate, an acute toxicity study was carried out in mice. The mice were administered LDD175 intraperitoneally at dose of 0.2, 1, 10, 50, 100, 200, 400, 800mg/kg and orally at dose of 10, 100, 400, 800mg/kg body weight. After administering LDD175, the vital organs such as the liver, kidney and spleen were carefully observed for any significant pathological features or differences from the norm over a l4-day period. LDD175 did not induce any short-term toxicity at doses less than 100mg/kg. A $LD_{50}$ of LDD175 was 2493mg/kg in male mice and 4908mg/kg in female mice. Weight reduction was observed at a dose of 800mg/kg in male, and 400 and 800mg/kg in female. The kidney weight decreased in females after an intraperitoneal injection of LDD175 high dose(>400mg/kg, i.p.), and the spleen weight increased in the male(800mg/kg, i.p.) and female(400mg/kg, i.p.) mice. Inspite of the change in organ weights, there were neither histopathological changes nor any gross morphological abnormalities detected in any organ. LDD175 did not produce significant changes in the general behavior at doses of <200mg/kg, but decreased locomotor activity was observed at an intraperitoneal dose of 400mg/kg. Its effects on the locomotor activity and activity on the rotarod were tested and compared with the effects of diazepam 5mg/kg. The decrement in the locomotor activity and the activity on the rotarod induced by LDD175 was less serious than it by diazepam.

• The Korean Journal of Nuclear Medicine
• /
• v.24 no.1
• /
• pp.29-36
• /
• 1990

Most of the diagnostic methods currently used for the detection of neoplastic masses provide indirect evidence. To obtain greater specificity in the interpretation of neoplasias by in vivo methods, the immunological approach appears to be most promising. Two problems that interfered with progress in this field were the lack of tumor specific antigen and the lack of well-defined and reproducible antibodies. To improve the sensitivity and specificity of radioimmunoscintigraphy as a technique for tumor localization, the use of monoclonal antibodies, fragments of antibodies and single photon emission computerized tomography (SPECT) are reasonable. The obvious advantages of monoclonal antibodies are their homogeneity, their specificity for the immunizing antigen and the reaction with a single determinant-thus no large immunecomplexes with antigen are formed. Monoclonal antibody technique has recently provided an opportunity to reevaluate the role of nuclear medicine for the diagnosis of malignant diseases by using the immunological approach. Out first results by means of radioimmunoscintigraphy of CEA and CA 19-9 producing tumors using a cocktail of fragments F $(ab')_2$, of mocolonal antibodies to CA 19-9 and CEA labeled with $^{131}I$ (IMACIS-1) are reported. The aims of this investigation was to evaluate the role of immunoscintigraphy in patients with colorectal and other cancers for diagnosis of local recurrences and metastasis. This report contains results of the first 8 colorectal and pancreas cancer patients with the elevation of the level of serum CEA and/or CA 19-9. IMACIS-1 was injected intravenously during 30 minutes in 100 ml saline solution after skin test. Planar scintigrams were recorded 3, 5 and 7 days after the injection of the IMACIS-1. Anterior, lateral and posterior views of the liver as well as anterior and posterior views of the pelvis were obtained in each patients as an $^{131}I-antibody$ image. We were able to localize exactly the malignant process with the double-nuclide double-compound $^{99m}Tc\;^{131}I$ (Tc+l) scintigrams. In Tc & I double-nuclide scintigraphy, computer subtraction display provided more clear localization of the tumor. We compared the results of radioimmunoscintigraphy with CT, ultrasonograms, conventional scintigrams. The results were as follows: 1) The sensitivity and specificity of radioimmunoscintigraphy using the fragments $F(ab')_2$ of the cocktails of CEA and CA 19-9 monoclonal antibodies were 80% and 100% respectively. 2) Tumor detection rate was not proportionated to the level of serum tumor markets. 3) Second tracer technique was essential for tumor localization as an anatomic landmark using double-nuclide scintigraphy. 4) A slow infusion of the antibodies was necessary to prevent the formation of large immune complexes. 5) Tumor/non-tumor radioactivity was most elevated at 7 days delayed imaging. 6) Using planar scintigraphic technique of $^{131}I$ labeled monoclonal antibodies are possible for imaging most of the tumors.

• Korean journal of food and cookery science
• /
• v.2 no.2
• /
• pp.1-7
• /
• 1986

Gulbi were made by salting Yellow corvenia (Pseudosciaena manchurica) with the in three ways: the dry salting method with bay salt, the dry salting method with purified salt or with the abdominal brine injection method with purifie salt. The half of the sample was dried by the control system of temperature and humidity: the other part was dried by the natural condition. In fresh muscle, the content of IMP, hypoxanthine, inosine and AMP were $13.40,\;9.28,\;3.01{\mu}mole/g$ and trace amount, dry basis, respectively. In fresh egg, the content of AMP, hypoxanthine, inosine and IMP were 13.98, 6.56, 1.98 and $1.93{\mu}mole/g$, dry basis, respectively. During the drying process of Yellow corvenia, the content of hypoxanthine increased remarkably, while the content of AMP, IMP and inosine decreased ana remained as trace amount. It can be suggested that the characteristic flavor of Gulbi is not attributed to the nucleotides and their related compounds but rather to free amino acids.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.576-582
• /
• 2013

To obtain the basic information on wood preservative process using copper, the penetration ACQ-2 preservative agent into Douglas fir wood and its degradational characteristics were investigated. Douglas fir is known to be difficult for preservative agent injection. To find the hindrance factor of the preservatives movement, the ray height, ray density, and length of tracheid were measured and observed by a stereoscopic microscope and scanning electron microscope. The results were compared in the well-penetrated parts of preservatives and insufficient parts. There were no significant differences in height, length, and density between both parts, except for the pits of the wood elements observed in SEM micrograph. More declosed pits were found in the well-penetrated parts of preservatives. Decay characteristics of wood specimen treated with various ACQ concentrations by brown-rot fungi was observed by an optical microscope. The decayed properties of tracheid, rays, and resin canals was found in the non-treated wood specimens and it was also found that some extent of preservatives concentration is necessary to protect the decay.

• Food Science and Preservation
• /
• v.18 no.3
• /
• pp.271-278
• /
• 2011

Considering the importance of cassava as food crops in humid tropics, the effect of feed moisture (20, 25%) and barrel temperature (110, $130^{\circ}C$) on physical properties (piece density, expansion, mechanical properties, color, water solubility index, water absorption index) and pasting properties of extruded cassava starch was investigated. The feed moisture used during extrusion processing had a significant effect on extrudates SME input, specific length and piece density at (p<0.05) while effect on cross-sectional expansion index, apparent elastic modulus and breaking strength in bending shown significantly at p<0.1. Furthermore, the interaction effect of feed moisture and barrel temperature gave a significantly affected the SME input and piece density (p<0.1), specific length (p<0.05) and on redness (p<0.01). The increase in water injection rate led to increase in piece density, apparent elastic modulus, breaking strength in bending, cold peak viscosity, breakdown and final viscosity and decrease in cross-sectional expansion index and specific length. It was found that the extrusion cooking process did not affect the value of color L, color b, water solubility index and water absorption index. Thus, the results of this study can be useful to some extent in developing extruded cassava starch as human and animal feeds.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.279-285
• /
• 2019

Transverse vibrations of a ship's aft end and deckhouse are mainly induced by transverse exciting forces from the main engine. Resonance should be avoided in the initial design stages when there is a prediction of resonance between the main engine and transverse modes of the deckhouse. Estimates of frequencies for resonance avoidance are possible from the specifications of the main engine and propeller, but the inherent vibration frequency of the structure around the engine room is not easy to estimate due to the variation in the shape. Experience-oriented vibration design is also carried out, which results in many problems, such as process delay, over-injection of on-site personnel, and iterative performance of the design. For the flexible design of 8,600 TEU container vessels, this study addressed the resonance problem caused by the transverse vibration of the main engine when only the main engine was changed from 12 cylinders to 10 cylinders without modification of the hull structure layout. Efficient structural reinforcement design guidelines are presented for avoiding resonances with the main engine lateral vibration and the structure around the engine room. The guidelines are expected to be used as practical design guidelines at design sites.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.3
• /
• pp.362-381
• /
• 2019

The purpose of this study is to examine how two factors among various affecting factors of technological innovation, i.e. sectoral system of innovation and R&D support service, were actually applied in the case of NUC Electronics. This company has achieved high level of innovation performance through change of injection port and improvement of extracting rate. This was possible because each component of sectoral system of innovation system was matched with the innovation activity. The improvement of the performance in NUC Electronics was attributable to its own innovation efforts and R&D support service of government research institute. In the process of technological innovation, the company could receive high-level services in areas such as product design and virtual experiments that companies can not solve themselves. It can be said that the role of government and public institutions to support the shortage of SMEs was important. In terms of each component of sectoral system of innovation, we found that there were many opportunities of new technology; sustainability was low; imitation was easy; appropriability was low but it has dualily; accumulation of technology was relatively high, availability of external knowledge was high. At the same time, both of the company and the network played an important role, and market conditions were very favorable. In terms of R&D support services, it is a direct effect that a great deal of time and cost savings have been achieved through virtual experiments on the material and shape of the screw. As an indirect effect, the core competence of the company has been greatly strengthened by utilizing the momentum of technology development through external support, hence the company could establish the structure of virtuous circle of innovation.