• Design & Manufacturing
• /
• 제17권4호
• /
• pp.42-51
• /
• 2023

In this study, we investigated the injection molding technology of thick-walled light guides, which are parts that control the light source of automotive lamps. Through injection molding analysis, the gate position that can minimize product shrinkage and deformation was selected, and a mold reflecting the analysis results was manufactured to evaluate the effect of injection speed and holding pressure on transferability during micro-pattern molding through experiments. When designing an injection mold for products with varying thicknesses, it was found that installing the gate on the side of the thicker part was advantageous for reducing volume shrinkage and deformation. It was found that the effect of shrinkage due to thickness may be greater than the position of the gate on pattern transferability. The pattern transfer error decreased as the injection speed and holding pressure increased, and it was found that increasing the injection speed was relatively effective.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.115-120
• /
• 2010

The reduction rate of fuel consumption by showing the fuel injection data for driver was measured in this study. The fuel injection data are composed of injection period, real time fuel economy and average fuel economy. The fuel consumption was measured by processing the voltage signal of injector and driven distance by GPS sensor. The fuel consumption was reduced by driving more carefully, i.e driving more steady without sudden acceleration and deceleration watching these fuel injection data. The reduction rate was up to 37% and the rate increased as the driver is customed to this driving pattern.

• 한국표면공학회지
• /
• 제53권4호
• /
• pp.138-143
• /
• 2020

In this study, we produced a coil of micro-pattern that can be used for electromagnetic wave absorber, heating material, wireless charging, sensor, antenna, etc. by using electrochemical additive manufacturing method. Currently, it contains research contents for manufacturing a micro pattern coil having practicality through control of process control variables such as applied voltage, distance between electrode, and nozzle injection. Circulation of the electrolyte through the nozzle injection control can significantly contribute to improving the surface characteristics of the coil because of minimizing voltage fluctuations that may occur during the additive manufacturing process. In addition, by applying the pulse method in the application of voltage, the lamination characteristics of the plated body were improved, which showed that the formation of a fine line width plays an important role in the production of a micro pattern coil. By applying the pulse signal to the voltage application, the additive manufacturing characteristics of the produced product were improved, and it was shown that the formation of a fine line width plays an important role in the production of a micro pattern coil.

• Journal of Nutrition and Health
• /
• 제32권7호
• /
• pp.767-774
• /
• 1999

This study was carrid out to examine a part of the mechanism for the etiology of diabetic complications. Thirty normal and forty streptozotocin(STZ)-induced diabetic rats were used as the animal models. Animals were sacrificed at the time points of 3 days, 1, 2, 4 and 6 weeks after STZ-injection and time course in body weight and organ weight, the levels of blood glucose, plasma lipid patterns, and atherogenic index were measured during 6 weeks. The STZ-diabetic animals showed 63% survival rate and fsting blood glucose levels of the diabetic animals measured in the range of 230-410mg/dL during the experimental period. The body weigh of diabetic animals decreased significantly throughout the experimental period and the relative weights of organs to body weight were significantly higher than the normal control ones. The enlargement of the kidney in the diabetic animals was especially remarkable. Plasma triglyceride concentration in diabetic rats substancially increased from the first week of onset of diabetes mellitus and maintained higher levels than the control ones throughout the whole experimental period. The plasma total cholesterol level and atherogenic index in the diabetic rats were significantly higher than the normal ones from the third day after STZ injection and showed a gradual increase with the duration of the disease. Throughout the experiment, the diabetic rats consistently showed a slightly lower HDL-cholesterol level compared to the normal animals. From the results of this study, it appears that the significant changes in blood lipid pattern in STZ-diabetic animals start from the first week after STZ injection.

• 소성∙가공
• /
• 제16권1호
• /
• pp.9-14
• /
• 2007

In this paper, a mold temperature control method for injection molding is proposed. The inner surface of mold is locally heated by jet impingement to improve pattern transcription. Heating by hot jet is completed while the mold is open. An experimental system that realizes the proposed idea has been built, which includes mold, nozzle assembly and heater. Actual injection molding process including the proposed heating procedure has been conducted to verify the validity of the method. The process has been done for several conditions with different jet temperatures and duration of heating. The results from different conditions are compared.

• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.85-90
• /
• 2011

In this paper a design procedure via computer-aided molding simulation is presented to optimize the air-trap locations in a speaker encloser of mobile phone. The molding flow simulation reveals that the race-tracking phenomenon is the dominant feature in the current mold design. In obtaining an optimal filling pattern, the local modifications of the wall thickness such as in a flow leader attachment are considered as the primary control factor, and both the gate position and the filling time become the secondary control factor. In the one-at-a-time approach, the last location to be filled in the mold cavity could be successfully moved to the extremities of the part, allowing a natural ventilation of entrapped air through the mold parting plane.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.192-196
• /
• 2005

In this paper, we investigated the possibility of replicating patterned media by nano-injection molding process with a metallic nano-stamper. The original nano-master was fabricated by E-beam lithography and ICP etching process. The metallic nano-stamper was fabricated using a nanoimprint lithography and nano-electroforming process. The nano-patterned substrate was replicated using a nano-injection molding process without additional etching process. In nano-injection molding process, since the solidified layer, generated during the polymer filling, deteriorates transcribability of nano patterns by preventing the polymer melt from filling the nano cavities, an injection-mold system was constructed to actively control the stamper surface temperature using MEMS heater and sensors. The replicated polymeric patterns using nano-injection molding process were as small as 50 nm in diameter, 150 nm in pitch, and 50 nm in depth. The replicated polymeric patterns can be applied to high density patterned media.

• 한국음향학회지
• /
• 제40권1호
• /
• pp.38-45
• /
• 2021

본 연구는 함정 추진기에 적용되고 있는 공기분사에 의한 수중방사소음 저감기술에 대한 연구기반을 마련하고자 캐비테이션 터널에서 단순화된 모형을 이용하여 공기분사에 의한 캐비테이션과 소음의 변화에 대하여 연구하였다. 추진기 날개와 유사한 특성을 나타내는 3차원 타원형 수중익에 공기분사 위치와 분사량을 조절할 수 있는 공기분사시스템을 제작하였으며 캐비테이션 터널 시험조건을 조절하여 수중익에 다양한 형태의 캐비테이션을 모사하고 공기분사에 따른 캐비테이션과 소음특성의 변화를 실험적으로 분석하였다. 공기분사 위치 및 분사량에 따라 캐비테이션 및 소음특성이 달라짐을 확인하였다. 이는 추진기에 공기분사 기술을 적용하기 위해서는 캐비테이션의 발생위치, 거동에 따른 공기 분사위치 및 분사량의 최적화가 필요함을 의미한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1064-1069
• /
• 2014

에멀젼연료(Emulsified fuel)와 EGR(Exhaust Gas Recirculation)는 디젤엔진으로부터 발생하는 NOx를 저감시키는 효과적인 방법들이다. 일반적으로, EGR 방법은 열적, 화학적 그리고 희석효과의 세 가지 다른 경로에 의하여 디젤 엔진의 연소에 영향을 미치는 것으로 알려져 있다. 그중 특히 열적효과는 흡기 중의 이산화탄소와 수분에 의한 열용량의 증가와 관련되어 있다. 한편, 물의 증발열과 마이크로 폭발(Micro-explosion)을 이용하는 에멀젼연료는 디젤엔진의 배기 배출물을 저감시키는 효과적인 방법으로 인식되어 왔다. 본 연구에서 저자는 함수율 20%의 에멀젼연료와 EGR율 30%의 사용에 의한 연소와 배기 배출물 특성에 대하여 연구하였다. 그리고 연료 분사 패턴 제어의 효과에 대하여 조사하였다.

• 치과방사선
• /
• 제21권2호
• /
• pp.203-220
• /
• 1991

The purpose of this study was to investigate the changes of morphology and structure of bone tissue, caused by administration of high-dose hydrocortisone, elcatonin and cyclophosphamide. In order to carry out experiment, 60 four-week old Sprague-Dawley strain rats weighing about 107 gms were selected and divided into experimental group and control group. The experimental group was subdivided into three groups, assigned fifteen rats for each group, by the different drugs administered. Each experimental group was then categorized as follows: hydrocortisone 30㎎/㎏ b.w. with daily subcutaneous injection, elcatonin 20U/㎏ b.w. with daily subcutaneous injection, and cyclophosphamide 100㎎/㎏ b.w. with a single intraperitoneal injection. Fifteen rats were injected daily with 5㎖/㎏ b.w. of normal saline solution subcutaneously in control group. Rats in control group and experimental group were serially sacrificed on the 6th, the 15th and the 22nd day after injection of normal saline, hydrocortisone, elcatonin and cyclophosphamide, respectively. Being sacrificed, both sides of mandibular condyles were removed and fixed with 10% neutral formaline. The one side of mandibular condyles was radiographed with soft X-ray apparatus. Thereafter, the obtained radiographs were observed, and the bone density of condylar head and condylar neck regions was measured by use of transferring video-based digital radiograph. The other side was further decalcified and embedded in paraffin as usual manner, then sectioned and stained with hematoxylin and eosin, observed by light microscope. The obtained results were as follows: 1. Sclerotic changes with regularly increased trabecular pattern were seen throughout experimental periods in hydrocortisone group. Increased the number of trabecular pattern with irregularity and periodic striation on the periphery of condylar head region were appeared with lapse of time in elcatonin group. In cyclophosphamide group, irregular trabecular pattern and stippled radiopacities on mandibular condyle were observed with lapse of time. 2. The bone density of condylar head region was increased in hydrocortisone group, decreased in elcatonin group, and tended to be decreased in cyclophosphamide group, compared with that of control group according to the experimental periods. 3. The bone density of condylar neck region tended to be rather increased in hydrocortisone group, elcatonin group and cyclophosphamide group, depending on the experimental periods. 4. In microscopic studies, there were irregular trabecular bonds and osteoblastic activity in hydrocortisone group and elcatonin group throughout experimental periods, degenerative cartilage and trabecular bones in the 6th day and densely calcified trabecular bones in the 22nd day in cyclophosphamide group.