• 제목/요약/키워드: Infiltration rate

검색결과 456건 처리시간 0.025초

창호 풍지판 형상에 따른 기밀성의 실험적 연구 (An Experimental Study of Window Air Tightness according to Filling Piece Shapes)

  • 윤유라;박종준;김영일;정광섭
    • 설비공학논문집
    • /
    • 제28권2호
    • /
    • pp.63-68
    • /
    • 2016
  • To study the effect of installation and the shapes of filling pieces used for windows on the infiltration rate, infiltration tests were performed with two types of sliding windows and two shapes for the filling pieces. Infiltration occurred most at the top and bottom parts of the center location where two windows overlap, indicating the necessity of a filling piece to be installed at these locations. Infiltration velocity is proportional to the square root of the pressure difference, complying well with the theoretical correlation. Infiltration is reduced about 50% by the filling piece installation. This study shows that filling pieces are essential and their shapes play significant roles in reducing the infiltration of windows.

배수성능 평가를 위한 침투능 산정기법에 관한 연구(II) (Estimation Method of Infiltration Capacity for Assessment of Drainage Capacity II)

  • 정지수;심정훈;이동혁;황영철;이승호
    • 한국지반환경공학회 논문집
    • /
    • 제21권12호
    • /
    • pp.23-28
    • /
    • 2020
  • 사질토지반에서 적용할 수 있는 합리적인 침투능 산정기법을 제시하기 위하여 실내실험결과를 분석한 결과, 단위중량이 감소함에 따라 침투속도는 증가하는 경향을 보였으며, 강우강도가 증가함에 따라 침투속도 또한 증가하는 것으로 나타났다. 또한 본 논문에서 제안한 초기침투능 감소상수(α계수)를 적용한 침투능 변화 곡선에 대하여 비교·분석한 결과 시간에 따른 침투능 변화가 거의 일치하는 것으로 나타났다. 본 연구에서는 침투능 및 침투량 산정 시 널리 사용되고 있는 Horton 경험식이 사질토지반에서는 적용이 어려운 점을 개선하여 침투능 산정 모형을 제안하였다.

조석의 침투류에 의한 패류 유생의 착저 (着底) 효과에 관한 기초적 연구 (Fundamental Study about Bottom-Clinging Rate in Free Floating Larva by Infiltration Flow in Tidal)

  • 백상호;박광재;박영제;전제천;조기채;김이운
    • 한국패류학회지
    • /
    • 제25권2호
    • /
    • pp.97-103
    • /
    • 2009
  • 본 연구에서 바지락 부유 유생은 저질입경이 클수록 착저율(${\Omega}_b$)이 높았으며, 생물적으로도 저질을 선택하고 있다는 것을 확인할 수 있었다. 또 침투류의 발생에 의한 유동장에 있어서는 유속이 10 cm/s, 저질 중앙입경 1.211 mm, 침투 유속 0.3 cm/s일 경우, 3.1-5.1 배의 부유 유생 착저 효과 $\alpha$ (=${\Omega}_b/{\Omega}_{b0}$)가 증가되는 것을 확인하였다. 부유 유생에 있어서 저질입경의 선택성은 생물적인 요인에 의존하고, 유동장에 있어서 착저 촉진 효과는 물리적인 안정 조건에 지배되어 있었다. 그리고 이번 새롭게 도입한 안정 지표(${\lambda}p$)에 의해 통일적으로 평가할 수 있는 것을 확인하였다. 유생의 안정 지표(${\lambda}p$)에 의하면, 유속이 작용했을 경우의 부유 유생은 저질입경에 영향을 받지 않고 거의 일정 값을 가지며, 초기 이동한계유속 및 전면 이동 한계유속에 대응하는 ${\lambda}p$값은 각각 0.14, 1.06 이였고, 새롭게 제안한 안정 지표(${\lambda}p$)의 타당성이 검증되었다. 따라서 본 연구 결과에 의해 어떤 해역의 바지락 부유 유생의 부유 밀도, 저질 입경, 유동 조건이 명확할 때, 바지락 부유 유생의 착저율을 추측할 수 있는 결과를 얻을 수 있었다.

  • PDF

공동주택단지 개발에서의 분산식 빗물관리 목표량 설정 - 택지개발사업지구 내 단지를 대상으로 - (Estimation of Proportion to Decentralized Rainwater Management Needed in Apartment Complex Development)

  • 이태구;한영해
    • KIEAE Journal
    • /
    • 제6권3호
    • /
    • pp.27-34
    • /
    • 2006
  • The recent emphasis on ecological urban development has led to the need to maintain a hydrologic cycle in urban areas. As such, this study proposes decentralized rainwater management, a concept of onsite rainwater management that involves the utilization, infiltration, detention, and retention of rainwater. The main objective of this research is to estimate the proportion of decentralized rainwater management that is needed. From the research that was conducted in this study, it was found that the total runoff quantity increases by 10-20% after district lands are developed, when the probable rate of precipitation every 10 years is within this range. Thus, the runoff rate can be reduced by 10~20% of the total runoff quantity through decentralization. On the other hand, in the scale of housing complex development, the total runoff quantity increases by as much as 10~40% due to the changes in the rate of the impervious surface area. If 10-40% of the total runoff quantity was processed through decentralized rainwater management, the rate of infiltration, detention, retention, and runoff in precipitation prior to development could be recovered.

온실 난방부하 산정방법의 검증 및 틈새환기와 지중전열의 영향 분석 (Validation of Load Calculation Method for Greenhouse Heating Design and Analysis of the Influence of Infiltration Loss and Ground Heat Exchange)

  • 신현호;남상운
    • 원예과학기술지
    • /
    • 제33권5호
    • /
    • pp.647-657
    • /
    • 2015
  • 원예시설의 환경설계 중 난방부하 산정방법에 대한 검증을 위하여, 대규모 플라스틱 온실에서 총난방부하와 틈새환기율, 지중전열량을 계측하여 계산결과와 비교 분석하였고, 지중전열 및 틈새환기가 온실의 난방부하에 미치는 영향을 검토하였다. 실험기간 동안 실내기온은 $13.3{\pm}1.2^{\circ}C$, 실외 기온은 $-9.4{\sim}+7.2^{\circ}C$의 범위를 보였으며, 우리나라의 난방 설계 외기온 범위에서 유효한 것으로 확인하였다. 가스트레이서법으로 측정한 틈새환기율은 평균 $0.245h^{-1}$로 나타났다. 온실의 피복면적에 일정한 환기전열계수값을 사용하는 방법은 온실의 규모에 따라서 문제가 있는 것으로 분석되었다. 따라서 환기전열부하는 온실의 체적과 틈새환기율을 이용하는 방법이 합리적인 것으로 판단된다. 온실 중앙에서 측정한 지중열류는 실내외 기온차에 따라 음으로 약간 증가하는 경향을 보이고, 온실 측면에서 측정한 지중열류는 실내외 기온차에 따라 양으로 크게 증가하는 경향을 보였다. 계측 결과를 바탕으로 온실의 외주부를 통한 열손실 개념을 도입한 새로운 지중전열부하 산정 방법을 개발하였으며, 검증결과 잘 일치하는 것으로 나타났다. 관류열부하는 대체로 실내외 기온차에 비례하는 것으로 나타났으나, 열관류율은 작아지는 경향을 보였다. 따라서 관류열부하 산정시 설계조건에 따라 열관류율의 선택에 주의를 기울여야 할 것으로 판단된다. 실험온실의 열관류율은 평균 $2.73W{\cdot}m^{-2}{\cdot}C^{-1}$로 단일피복의 플라스틱 온실 대비 60%의 열절감율을 보이는 것으로 나타났다. 전체 난방부하 중에서 관류열부하가 84.7~95.4%, 환기전열부하가 4.4~9.5%, 지중전열부하가 -0.2~+6.3%를 차지하는 것으로 나타났다. 관류열부하는 실내외 기온차가 낮은 그룹에서 더 큰 비율을 차지하고, 환기전열 부하는 실내외 기온차가 높은 그룹에서 더 큰 비율을 차지하는 것으로 나타났다. 지중전열부하의 경우 실내외 기온차가 낮은 그룹에서는 부하를 경감시키는 방향으로 작용하고, 실내외 기온차에 따라 부하를 증가시키거나 경감시키는 방향으로 작용하는 것으로 나타났으므로 이 기준 온도차의 선택이 중요한 것으로 판단된다. 지중전열부하에 비하여는 환기전열부하가 더 큰 비중을 차지하므로 에너지 절감을 위해서는 틈새환기율을 줄일 수 있는 대책이 필요한 것으로 판단된다.

순환형 도시계획에 따른 LID기술의 물수지 분석 (Water Balance Estimate of LID Technique for Circulating Urban Design)

  • 강승희;허우명;강상혁
    • 한국환경과학회지
    • /
    • 제24권8호
    • /
    • pp.1065-1073
    • /
    • 2015
  • Urbanization can be significantly affected the hydrologic cycle by increasing flood discharge and heat flux. In order to mitigate these modifications in urban areas, Low Impact Development (LID) technique has been designed and applied in Korea. In order to estimate runoff reduction rate using SWMM LID model, the characteristics of five LID techniques was firstly analyzed for water balance. Vegetated swale and green roof were not reduce flood discharge nor infiltration amount. On the other hand, porous pavement and infiltration trench were captured by infiltration function. The flood reduction rate with LID is substantially affected by their structures and properties, e.g., the percentage of the area installed with LID components and the percentage of the drainage area of the LID components.

Double versus single cartridge of 4% articaine infiltration into the retro-molar area for lower third molar surgery

  • Sawang, Kamonpun;Chaiyasamut, Teeranut;Kiattavornchareon, Sirichai;Pairuchvej, Verasak;Bhattarai, Bishwa Prakash;Wongsirichat, Natthamet
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제17권2호
    • /
    • pp.121-127
    • /
    • 2017
  • Background: There are no studies regarding 4% articaine infiltration injection into the retro-molar area for an impacted lower third molar (LITM) surgery. This study aimed to evaluate the efficacy of infiltration using 1.7 ml (single cartridge: SC) of 4% articaine versus 3.4 ml (double cartridges: DC) of 4% articaine with 1:100,000 epinephrine in LITM surgery. Method: This study involved 30 healthy patients with symmetrical LITM. The patients were assigned to receive either a DC or SC of 4% articaine with 1:100,000 epinephrine as a local anesthetic for each operation. Onset, duration, profoundness, need for additional anesthetic administration, total volume of anesthetic used, vitality of the tooth, and pain score during operation were recorded. Results: The DC of 4 % articaine had a significantly higher success rate (83.3%) than did the SC (53.3%; P<0.05). The duration of soft tissue anesthesia was longer in the DC group. The intra-operative pain was higher in the SC group with a significant (P < 0.05) requirement for a supplementary local anesthetic. Conclusion: We concluded that using DC for the infiltration injection had a higher success rate, longer duration of anesthesia, less intra-operative pain, and a lower amount of additional anesthesia than SC in the surgical removal of LITM. We recommend that a DC of 4% articaine and a 1:100,000 epinephrine infiltration in the retro-molar region can be an alternative anesthetic for LITM surgery.

돈분뇨 액비 시용이 벼 생육 및 침투수질에 미치는 영향 (Effect of Liquid Pig Manure on Growth of Rice and Infiltration Water Quality)

  • 박백균;이종식;조남준;정광용
    • 한국토양비료학회지
    • /
    • 제34권3호
    • /
    • pp.153-157
    • /
    • 2001
  • To evaluate the effect of liquid pig manure application, the growth and yield of rice and the quality of infiltration water were investigated with application of different amounts of liquid manure. At this study, liquid pig manure was treated with 100, 200, 300 and 400% of recommending nitrogen fertilizer level, respectively. Liquid manure with application rate more than 200% of recommending N fertilizer level (11kg) caused to increase of plant height and number of tiller at panicle formation stage, but it caused the plant disease and pest and plant lodging. In those treatment, number of panicles per hill and number of spikelets per panicle were increased, but yield of rice was less than chemical fertilizer treatment due to low rate of ripeness and 1,000 grain weight. $NO_3-N$ concentration in infiltration water sample collected at 90 cm of soil depth was increased with increasing application amount of liquid manure. With liquid manure application more than 200% of recommending N fertilizer level, it affected negatively on yield and environment such as groundwater quality.

  • PDF

지반 유형에 따른 켄터키 블루그래스의 생육특성 (Growth Characteristics of Kentucky Bluegrass on Different Rootzone Foundations)

  • 이혜원;정대영;심상렬
    • 한국조경학회지
    • /
    • 제31권6호
    • /
    • pp.95-103
    • /
    • 2004
  • A turfgrass rootzone foundation is one of the important iufluences on the growth of cool-season turfgrass such as Kentucky bluegrass, which is usually grown on korean golf courses and athletic fields in Korea. This study was carried out to evaluate the growth of Kentucky bluegrass on 4 types of turfgrass root-zone foundations: a 2cm thickness of Sand 90%+Peat humus 8%+Zeolite 2% mixture on a subsoil base (C), a 20cm thickness of Sand 90%+Peat humus 8%+Zeolite 2% mixture (S), a 20cm thickness of Sand 45%+fine sand(a sort of Bomyungsa) 45%+Peat humus 8%+Zeolite 2% mixture (S+F), and a 20cm thickness of Sand 45%+fine sand(a sort of Bomyungsa) 45%+Peat humus 8%+Zeolite 2% mixture on a 20cm thick drainage layer (S+F(G)). Visual ratings of Kentucky bluegrass on the C foundation were low throughout the experiment when compared to S, S+F, and S+F(G) foundations, which contained high contents of sand with a high water infiltration rate. However, poor growth of Kentucky bluegrass in the summer of 1991 on the S foundation was likely to be caused by a too high water infiltration rate (185.8cm/hr). The growth of Kentucky bluegrass on the S+F(G) was good while the growth was a little weak at the developing stage on the S +F foundation. If the cost had to be considered when constructing golf courses and athletic fields, The S+F foundation without the drainage layer would be the best choice in terms of low cost and good quality of Kentucky bluegrass compared to the S+F(G). In this result, the infiltration rate was regarded as the most influential factor to the growth of Kentucky bluegrass on rootzone foundations.

유역내 네가지 강수손실 성분들의 합성 (Combining Four Elements of Precipitation Loss in a Watershed)

  • 유주환
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2012년도 학술발표회
    • /
    • pp.200-204
    • /
    • 2012
  • In engineering hydrology, an estimation of precipitation loss is one of the most important issues for successful modeling to forecast flooding or evaluate water resources for both surface and subsurface flows in a watershed. An accurate estimation of precipitation loss is required for successful implementation of rainfall-runoff models. Precipitation loss or hydrological abstraction may be defined as the portion of the precipitation that does not contribute to the direct runoff. It may consist of several loss elements or abstractions of precipitation such as infiltration, depression storage, evaporation or evapotranspiration, and interception. A composite loss rate model that combines four loss rates over time is derived as a lumped form of a continuous time function for a storm event. The composite loss rate model developed is an exponential model similar to Horton's infiltration model, but its parameters have different meanings. In this model, the initial loss rate is related to antecedent precipitation amounts prior to a storm event, and the decay factor of the loss rate is a composite decay of four losses.

  • PDF