• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.36-48
• /
• 2019

The purpose of this study is to investigate case studies and industry needs for convergence education in the fields of electronics, software, and automobiles, which are the technical foundations of the Fourth Industrial Revolution. Through the literature review, the convergence education programs focusing on electronics, software, and automobile were derived. The areas were validated by the experts review who consisted of three industry experts and professors in the relevant fields. Domestic and foreign curriculum were investigated to understand the current state of technical convergence education in each field. Industry needs survey for technical convergence education was conducted in cooperation with the Sector Council of Industrial Resources. Research instruments consisted of three parts: needs for technical convergence education, needs for the specific convergence education in the field of electronics, software, and automobile, and opinions on convergence education. A total of 341 participants responded to the questionnaires: 132 in the electronic field, 100 in the software field, and 109 in the automobile field. The industry needs for convergence education were analyzed and implications were suggested. The results of this study are expected to provide a guideline for developing convergence education programs in higher education.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1075-1080
• /
• 2020

The development of computing technology and networking is developing as the fundamental technology of the 4th industrial revolution. AR and VR technologies, which are dual realistic media fields, are developing into many application areas, especially! The potential for development in the medical field is very high. As for the development potential of the health care field, the 4th industrial revolution such as AR/VR to solve problems, such as the increase of various chronic diseases due to the aging of the population, the limitation of infrastructure that can deal with them, and the lack of specialized personnel. It is adopting services in the healthcare field using representative technologies. Accordingly, AR/VR in the healthcare field occupies about 17% of the total industrial market. Therefore, in this study, cognitive judgment technology using AR applies cognitive evaluation through a computing system to the mild cognitive impairment, and based on the results, researches to utilize cognitive rehabilitation contents using augmented reality, and hardware necessary for cognitive judgment technology. Also, software design to help in the field of cognitive judgment technology and healthcare using AR.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.433-433
• /
• 2016

Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission. CNT yarns have demonstrated its potential as excellent field emitters. It was demonstrated that a small focal spot size was achieved by manipulating some electrical parameters, such as applied bias voltage at the mesh gate, and electrostatic focal lenses, geometrical parameters, such as axial distances of the anode, and the electrostatic focal lens from the cathode assembly, and the dimension of the opening of the electrostatic lens. Electrical-optics software was used to systematically investigate the behavior of the electron beam trajectory when the aforementioned variables were manipulated. The results of the experiment agree with the theoretical simulation results. Each variable has an individual effect on the electron beam focal spot size impinging on the target anode. An optimum condition of the parameters was obtained producing good quality of X-ray images. Also, MWCNT yarn was investigated for field emission characteristics and its contribution in the X-ray generation. The dry spinning method was used to fabricate MWCNT yarn from super MWCNTs, which was fabricated by MW-PECVD. The MWCNT yarn has a significant field emission capability in both diode and the triode X-ray generation structure compared to a MWCNT. The low-voltage-field emission of the MWCNT yarn can be attributed to the field enhancing effect of the yarn due to its shape and the contribution of the high-aspect-ratio nanotubes that protrude from the sides of the yarn. Observations of the use of filters on the development of X-ray images were also demonstrated. The amount of exposure time of the samples to the X-ray was also manipulated. The MWCNT yarn can be a good candidate for use in the low voltage field emission application of X-ray imaging.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.837-844
• /
• 2015

The purpose of this paper is to suggest the method of creation and management of urban green field based on carbon emission reduction. For a case study, Daejeon Metropolitan City in Korea was chosen. For the study, the relevant concepts of green field and carbon emission plans are reviewed as a theoretical research, and current problems of the urban green field are surveyed focused on metropolitan cities in Korea. Implementation plans of park and green in Daejeon Metropolitan City were analysed in the aspect to carbon emission reduction, climate change responding and urban green field expansion. Finally, as a result of the study, the method of creation and management of urban green field based on carbon emission reduction in the perspectives of urban structure change, green field network, conservation of green field and relevant institutions are suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3611-3616
• /
• 2013

Physical characteristics of a magneto-rheological(MR) fluid can be influenced by a magnetic field. In the present study, the behaviors of MR fluid are visualized and the shear stresses are measured under the magnetic field for density 1.3, 1.5 and 1.7 $g/cm^3$, and viscosity 100, 1000 and 10000cp. When the magnetic field is applied, particles of MR fluid are arranged along lines of magnetic field. It is observed that the flow pattern of MR fluid under the magnetic field is different from that of MR fluid without the magnetic field. Shear stress of MR fluids under the magnetic field changes significantly. Shear stress by the magnetic field increases the shape of a quadratic equation. When the density changes from $1300kg/m^3$ to $1700kg/m^3$ at 2.0A, the shear stress increases about 33%.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.41-49
• /
• 2017

Process quality control, which prevents problems and risks that may occur in products and processes, has been recognized as an important issue, and SPC techniques have been used for this purpose. Process Capability Index (PCI) is useful Statistical Process Control (SPC) tool that is measure of process diagnostic and assessment tools widely use in industrial field. It has advantage of easy to calculate and easy to use in the field. $C_p$ and $C_{pk}$ are traditional PCIs. These traditional $C_p$ and $C_{pk}$ were used only as a measure of process capability, taking into account the quality variance or the bias of the process mean. These are not given information about the characteristic value does not match the target value of the process and this has the disadvantage that it is difficult to assess the economic losses that may arise in the enterprise. Studies of this process capability index by many scholars actively for supplement of its disadvantage. These studies to evaluate the capability of situation of various field has presented a new process capability index. $C_{pm}$ is considers both the process variation and the process deviation from target value. And $C_{pm}{^+}$ is considers economic loss for the process deviation from target value. In this paper we developed an improved Expected Loss Capability Index using Reflected Normal Loss Function of Spring. This has the advantage that it is easy to realistically reflect the loss when the specification is asymmetric around the target value. And check the correlation between existing traditional process capability index ($C_{pk}$) and new one. Finally, we propose the criteria for classification about developed process capability index.

• Journal of Korean Dental Hygiene Science
• /
• v.6 no.2
• /
• pp.141-150
• /
• 2023

Background: This study was conducted to verify the effectiveness of geriatric dental hygiene education by developing and operating an industrial demand-based curriculum for geriatric dental hygiene. Methods: Wilcoxon signed rank test was performed to verify the before-and-after differences in major competency achievement, geriatric dental hygiene awareness, and class satisfaction according to industrial demandbased field-oriented practical education, and Spearman's correlation analysis was performed to confirm the association between each factor(p<0.05). Results: In the case of major competency achievement, 'communication competence with the older adults' was significantly improved(p=0.031) after conducting industrial demand-based field-oriented practical training. Conclusion: It is believed that the understanding of the older adults and the practical skills for oral care of the older adults can be further developed when the learners are provided with a practical curriculum that can be used in the geriatric industrial field.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.5
• /
• pp.107-114
• /
• 2011

The purpose of this paper is to develop a reliability estimation process of agricultural machinery components using field failure data. Estimating the durability is a time-consuming in the product development process. Using the field data of tractor, failures for major parts are investigated and databases are developed. Accelerated life test using the stress analysis could improve Weibull B10 considerably. This estimation process is useful for preparing the design input and planning the durability target.

• Journal of the Korean Society of Safety
• /
• v.32 no.1
• /
• pp.90-97
• /
• 2017

Overhead cranes are the most widely used and have been identified as one of the main causes of fatal accidents. Although structural, mechanical and electrical safety standards for overhead cranes have been established to some extent, ergonomic standards related to crane controllers are rarely established. As a result, many crane accidents are reported to be caused by operator's error. To investigate the actual use of crane controllers in the industrial field, we surveyed 82 overhead cranes in 15 workplace and interviewed workers operating them. This study has presented the ergonomic problems related to the crane controllers in the field. As a result of investigation, it was found that the direction control signs, the sign language, and the button layout on the pendant switches and remote controllers are not standardized, which can cause a human error. To reduce human errors in overhead crane operation, ergonomic standards for controllers should be reflected on the government legislation or standards.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.14 no.2
• /
• pp.67-78
• /
• 2010

An elastic field composed of symmetric cross-ply laminated material is analyzed in roller guided panel. The plane stress elasticity problem is formulated in terms of two displacement parameters with mixed boundary conditions. The numerical solution for two displacement parameters is obtained using a finite element method considering a panel of glass/epoxy laminated composite. Some components of stress and displacement at different sections of panel are displayed. The results makes sure that the formulation developed in this study can be applied to analyze the characteristics of elastic field made of laminated composite under any boundary conditions.