• Resources Recycling
• /
• v.5 no.1
• /
• pp.3-8
• /
• 1996

CZS(2Ca0 , SiO\ulcorner) phase of cement clinkcr was obtaincd by melting mixcd four indnstrial wasles of limestone sludge, waste Foundry sand, coal lly ash fiorn power plants and chernicas glasses. The effect ot mixing ratio of four rvastc mater~als ou the composnlg phascs in melled slag was investigated. Thc mixed wastes were meltcd to slag by heat under a constant basicity at 1370C. The shg consisted of p -CIS and C,AS(2CaO - A I P , . SiO,). The ratio of two phases was varied with mixing ~atioo f the waste materials. In order Lo increasc the amount ot j -C2S phase, the coal fly ash content should be reduced, while amount of the chemical glass be increased. The coal fly ash contcnt was the most imporlant factor in controlling phases of thc melted-slag.

• Advances in concrete construction
• /
• v.14 no.1
• /
• pp.1-13
• /
• 2022

Due to the physical-chemical characteristics of some bottom ash (BA), there are technical, economic and environmental limitations to find a destination that will add value to it. In Brazil, this residue is eventually used for filling coal extraction pits or remains in sedimentation ponds, creating a susceptible panorama to environmental issues. The geopolymers binders are one of the alternatives to the proper use high amounts of these materials. In this work, geopolymeric binder pastes were produced with BA mixed to activators with different alkali contents (expressed as %Na₂O), as well as the incorporation of soluble silicates (Ms content). The production of binary geopolymeric pastes based on the use of two industrial wastes: fluid catalytic cracking (FCC) and aluminum anodizing sludge (AAS), was also assessed. The content in mass of BA/FCC and BA/AAS ranged from 100/0, 90/10; 80/20 and 70/30. Systems with soluble silicates as activator in a molar ratio SiO₂/Na₂O of 1.0 (Ms = 1.0) and Na₂O content of 15%, showed the best results of mechanical strength (42 MPa at day 28^th). The improvement is up to 5X when compared to NaOH based systems. For systems with partial replacement of BA of 10% of AAS and 20% of FCC (80/20), the presence of soluble silicates was also effective to increase compressive strength.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.2
• /
• pp.107-114
• /
• 2024

Objectives: This study was performed to evaluate the musculoskeletal symptoms of workers treating electronics industry waste at a recycling sorting plant by case survey. Methods: The musculoskeletal symptoms were investigated by conducting a survey targeting workers treating waste from the electronics industry. Through utilizing the ergonomic evaluation techniques such as RULA, REBA, and OWAS, the four tasks were divided into three detailed processes (sorting, movement, loading) and the work of workers was evaluated for a total of 12 processes. Results: As a result of the questionnaire survey on musculoskeletal symptom, 40% of workers answered that they had musculoskeletal disease symptoms, and the symptom sites were hands(30%), legs(20%), arms(10%), and shoulders(5%). Based on the results obtained from analysis through ergonomic evaluation techniques such as RULA, REBA, and OWAS, 75% of them were found to need improvement or follow-up immediately or immediately after the second stage or higher. As compared to REBA and OWAS, the RULA, which evaluates the upper limb in detail, has a higher score, and in the process of sorting and loading relatively light wastes such as paper and plastic, the waist is raised by repeating the work of bowing and stretching. Conclusions: The heavy wastes such as 200L drums were evaluated as having a low load on the elbows and wrists because body action was relatively lower than moving paper and plastic. In addition, the overall load score was evaluated lower in the moving work compared to the sorting or loading process.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.2
• /
• pp.97-111
• /
• 2015

In this paper, a methodology for effectively treating daily waste at D metropolitan city is considered using reverse logistics(RL) network. Currently, eight district offices at D metropolitan city are treating their daily wastes using each RL network. However, unfortunately, current method has a weakness such as inefficiency of RL network operation. Therefore, we propose a revised method for improving the inefficiency. In case study, we compare the performances of the current and revised methods using various real-life data. The analysis result shows that the revised method outperforms the current method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.2 no.2
• /
• pp.65-71
• /
• 2001

Recently the quantities of waste asphalt concrete at construction sites have increased greatly, but the maintenance and final disposal is very difficult problem. Therefore, we were faced with a worsening environmental problem brought about illegal measures. One of the most effective recycling method is cold recycling. This method will satisfy treatment and recycling of construction wastes. Also it is very important question in the preservation of environmental and natural resources. So, in this paper, we dealt cold recycling modified asphalt mixtures using emulsified asphalt to concern the effect of adding reclaimed asphalt concrete 30, 40, 50% and using SBR Latex for modified asphalt mixtures.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.2
• /
• pp.257-264
• /
• 2011

Recycling of industrial products as the stabilizers can be proper handling of industrial products and has positive side in terms of recycling of wastes. In this study, the final aims were to evaluate the usability as stabilizer of Bio-solids which was generated from contaminated soil with heavy metals after primary process and to compare the treatment efficiency with slag being currently applied in many existing sites. Soluble and exchangeable forms have closely related to pollution of groundwater and plant growth and they can be used to determine the effect of the stabilization efficiency. Slag and Bio-solids were tested to investigate the capacity of stabilizing arsenic. Slag treatment process 4 (PS-ball 5%) showed higher leachate concentration rather to 0.84% compared to treatment 1 (blank) based on an average of 0.63%. The other hand treatment 4 (Bio-solids 5%) showed the lowest soluble and exchangeable forms to 0.57% when Bio-solids was applied to stabilize arsenic. Thus, the leaching of arsenic will be more reduced if the Bio-solids are used as stabilizer in stead of slag which is being currently used in many fields.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.4
• /
• pp.51-58
• /
• 2019

The LBS(Location Based Service) technology plays an important role in reducing wastes of time, losses of human lives and economic losses by detecting the user's location in order by suggesting the optimal evacuation route of the users in case of safety accidents. We developed an algorithm to estimate indoor location, movement path and indoor location changes of smart phone users based on the built-in sensors of smartphones and the dead-reckoning algorithm for pedestrians without a connection with smart devices such as Wi-Fi and Bluetooth. Furthermore, seven different indoor movement scenarios were selected to measure the performance of this algorithm and the accuracy of the indoor location estimation was measured by comparing the actual movement route and the algorithm results of the experimenter(pedestrian) who performed the indoor movement. The experimental result showed that this algorithm had an average accuracy of 95.0%.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.55-60
• /
• 2009

Stabilization treatment is one of processes for wastes and their components to reduce their toxicity and migration rates to surroundings. Inorganic binders such as calcium hydroxide, blast furnace slag and red mud were tested for their potential applicability to in-situ stabilization of heavy metal contaminated tailings in the abandoned metal mines. Columns(150mm dia. ${\times}$ 450mm length) filled with mixtures of inorganic binders and tailing from the Geumjang mine with various mixing ratios of binders to tailings, 5%, 7% and 9% were applied artificial rainfall tests for 28 days. Effluents from columns filled with calcium hydroxide and tailing showed high pH's of ~12.5 and a increasing trend of concentration in Pb and Zn with a significant decrease in permeability in terms of elapsed days. Those with burning slag and tailing showed pH's of ~8.5 and significantly low concentrations in heavy metals with a stable permeability. In case of red mud, effluents showed significantly low concentrations in heavy metals but a decreased permeability with pH's of ~10.5. Conclusively, this basic study suggests burning furnace slag be a potential stabilizer for effective treatment of heavy metal contaminated mine tailings.

• Journal of the Korean Ceramic Society
• /
• v.43 no.10 s.293
• /
• pp.626-634
• /
• 2006

Ceramics manufacturers in the nation produced more than 5000 tons of ceramics wastes a year increasing industrial waste quantity: However, almost no researches were made to reduce environmental pollution and to recycle waste ware. In this study, white ware scraps that were produced at Icheon, Gyeonggi-do were recycled to make use of them as raw materials of ceramics body and to develop new ceramics body that had economic advantages and good quality. The findings showed that the addition of waste ware had limit of 20 wt% considering molding. The addition of waste ware of 20 wt% to white ware lowered baking temperature of the white ware that was added by waste ware of 20 wt% by 30$^{\circ}C$ than existing white ware, and property values were good, for instance, porosity of 3% in average and water absorptivity of 2% in average, and the bending strength recorded more than 800 kgf/$cm^2$ to be high than that of existing white ware being sold in market. The waste ware could be used to produce new ware body and to recycle resources and to solve environmental problems caused by burial and to improve property of ceramics and to save transportation costs as well as baking costs.

• The Korean Journal of Mycology
• /
• v.19 no.1
• /
• pp.41-46
• /
• 1991

Three isolates of yeast utilizing phthalic compounds as a sole carbon source were obtained from the surface waters exposed to the industrial effluents near Cheong Ju city. On the basis of microscopic observations on morphology and various biochemical characterizations, the three isolates were identifed as a species of Rhodotorula. Candida or Torulopsis. A number of aroma­tic chemicals including phthalic compounds would support the growth of these yeasts as a sole carbon source, Thus, the yeast isolates would have potentials in reduction of environmental burden due to industrial wastes of aromatic hydrocarbons.