• 한국응급구조학회지
• /
• 제25권2호
• /
• pp.71-97
• /
• 2021

Purpose: This study aimed to examine the development and improvement direction of university education according to job type and investigate the types of knowledge required for employment after graduation for departments of emergency medical technology in preparation for the era of the fourth industrial revolution in a converged society. Methods: From June 3 to June 10, 2019, data were collected through structured questionnaires from 90 paramedics working in firefighting, hospitals, different industries, and emergency patient transportation. Data were analyzed using the software SPSS version 18.0. Results: For employment after graduation in departments of emergency medical technology, character and sincerity education should be strengthened. To prepare for the fourth industrial revolution, educational innovations such as improving the field practice system and devising a convergence curriculum are needed. Preparation for the fourth industrial revolution should be accomplished through the development of convergence subjects such as forensic science, information and communications technology, and safety engineering. Ninety percent of the study respondents indicated their need for convergence subjects. Conclusion: The demands of future society should be responded to flexibly by holding and conducting convergence subjects. Furthermore, preparations should be made in anticipation of a shortage of 120,000 college freshmen for the 2024-2025 school year by increasing the competitiveness of departments of emergency medical technology.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.181-189
• /
• 2020

As production, distribution, consumption and processing increase with the development of industrial societies, the importance of resource depletion and environmental problems is increasing day by day. This has led to increased research and interest in remanufacturing that can satisfy both environmental and economic aspects. Currently, the remanufacturing industry is progressed in Korea with automobile parts with as the central figure, and it needs to be expanded into various areas. In this study, the failure type analysis and FMEA were performed on the hydraulic pumps used in construction and industrial sites for the development of the standard remanufacturing process plan, and the actual disassembly and reassembly process was carried out. Remanufacturing products were manufactured through the analysis contents and drawing process, performance tests were conducted in accordance with RS B1501 criteria to evaluate performance, and all of these products passed the test criteria.

• 한국의류학회지
• /
• 제41권4호
• /
• pp.771-781
• /
• 2017

The helmet is an imperative personal protective equipment. This protective device must be able to guard the human head against potential risks. Helmets are classified according into the purpose of use; therefore, the required performance and specifications depend on the type of products. Military helmets are intended to protect the wearer's head from bullets and shrapnel. Generally, lightweight super fibers and fiber reinforced composite materials are used as helmet shell materials, and NIJ STD of U.S. Department of Justice is most widely used as international standard related to bulletproof helmets. Safety helmets are widely used for industrial application and sports leisure. In general, the performance of shock absorption must be ensured, and various lining systems are applied in material, design, and combination methods. Evaluation standards have also been classified and strictly controlled for each purpose; therefore, it is difficult to certify with the existing standards such as the recently developed convergence helmets. However, it is possible to launch the product through a separate national integrated certification procedure.

• 한국의류산업학회지
• /
• 제25권5호
• /
• pp.651-660
• /
• 2023

This study aimed to research the local production of conductive composite yarn, a source material used in textile-type electrodes and circuits. The physical properties of an internationally available conductive composite yarn were analyzed. To manufacture the conductive composite yarn, we selected one type of conductive yarn with Ag-coated polyamide of 150d 1 ply, along with two types of polyethylene terephthalate (PET) with circular and triangular cross-sections, both with 150d 1 ply. The conductive composite yarn samples were manufactured at 250, 500, 750, and 1000 turns per meter (TPM). For both conductive composite yarn samples manufactured from two types of PET filaments, the twist contraction rate of the sample with a triangular cross-section was stable. Among the samples, the tensile strength of the sample manufactured at 750 TPM was the highest at approximately 4.1gf/d; the overall linear resistance was approximately 5.0 Ω/cm, which is within the target range. It was confirmed that the triangular cross-section sample manufactured with 750 TPM had a similar linear resistance value to the advanced product despite the increase in the number of twists. In future studies, we plan tomanufacture samples by varying the twist conditions to derive the optimal conductive yarn suitable for smartwear and smart textile manufacturing conditions.

• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.29-39
• /
• 2019

In this study, we introduce a model that satisfies energy efficiency and economical efficiency by introducing and demonstrating cogeneration generators in industrial complexes using various actual data collected at the site. The proposed model is composed of three scenarios, ie, full - time operation, scenario operated according to demand, and a fusion type. In this study, the power generation profit and surplus thermal energy are measured according to the operation of the generator, and the thermal energy is traded according to the demand of the customer to calculate the profit and loss including the heat and evaluate the economic efficiency. As a result of the study, it is relatively profitable to reduce the generation of the generator under the condition that the electricity rate is low and the gas rate is high, while the basic charge is not increased. On the contrary, if the electricity rate is high and the gas rate is low, The more you start up, the more profit you can see. These results show that even a cogeneration power plant with a low economic efficiency due to a low "spark spread" has sufficient economic value if it can sell more than a certain amount of heat energy from a nearby customer and adjust the applied power through peak management.

• 산업융합연구
• /
• 제3권1호
• /
• pp.79-100
• /
• 2005

Considering the above points, this study has been conducted to find out the effects brought by perceived organizational justice towards organizational citizenship behavior, with focus on multi-dimension and multi-class nature of trust. With this objective, I researched the following. First, which type gives larger effect to organizational citizenship behavior, the type of distributive justice (that is lower dimension of organizational justice) or that of procedural justice. Second, what effects are given to the 5 types of trust, by distributive justice and procedural justice. Also, what effects are given to organizational citizenship behavior by the 5 types of trust. Third, which type of justice gives larger effect to organizational citizenship behavior when trust is served as a medium. Fourth, which items should be dealt in priority to lead members of organization towards a desirable direction. The research for this purpose was conducted on the basis of comprehensive analysis of variable including. socio-population variable.

• 한국융합학회논문지
• /
• 제8권5호
• /
• pp.45-52
• /
• 2017

본 연구는 가스 안전 작업 관리 모바일 앱의 개발을 위하여 다음과 같은 사항을 연구하였다. 기 연구된 초기 연구에 의해 모바일 앱의 시나리오 설계 및 1, 2차 이미지 도출이 완료된 후 후속 연구로 이루어 진 본 연구에서는 1) 가스 작업의 유형별 분류를 형태별 분류와 위험도 별 분류로 나누어 제안 2) 투핸드 작업의 많은 산업현장에서 모바일 앱과 작업자의 효과적인 연동을 위한 인터랙션 방안의 연구 및 제안이 이루어졌다. 특히 가스 작업뿐 아니라 각 산업현장 영역에서 이를 관리하는 메인 시스템과 상호작용하는 모바일 앱의 개발은 국내 최초의 시도라 할 수 있으며, 다양한 인터랙션 방안을 통해 작업자가 자유롭고 안전하게 작업할 수 있도록 도왔다.

• 대한산업공학회지
• /
• 제20권3호
• /
• pp.139-149
• /
• 1994

For general open queueing network models, the relationship between weak limits of queue lengths and waiting times at stations is investigated under heavy traffic situations. It is shown that under suitable normalization, weak convergence of queue lengths and arrival processes is a sufficient condition for that of waiting times, and is also necessary condition when the network is of feedforward type. Moreover, these weak limits for queue lengths and waiting times are shown to be simply related.

• 산업융합연구
• /
• 제13권3호
• /
• pp.11-25
• /
• 2015

The purpose of this study is to find out the security guard of the destination and type of terrorism, surveillance, and identification / carried out in order to identify the recognition site the ability to respond to terrorism prevention measures, safety measures on terror. Analysis was conducted by the survey research through the literature for recognition of terrorism in order to derive the measured variables for the general recognition of the guards, pay security guard 300 patients.

• 산업융합연구
• /
• 제12권2호
• /
• pp.40-52
• /
• 2014

I present a theoretical analysis of the charismatic leadership and the follower's role. I distinguish between two types of charismatic relationships and present general propositions about how followers' self-concepts may dertermine the type of charismatic relationship they form with the leader. I conclude by suggesting further the study.