• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.381-391
• /
• 2018

The goal of current study was to investigate the perception of emotional lighting according to the types of exercise participation of fitness center users. The subjects of this study were 292 people in Gyeongin area fitness center. As a survey tool, the color types used in the study of Oh & Kwak(2015) were used, and the color recognition was based on the emotional adjective scale used in Lee(1997). Data were analyzed using crossover, independent t-test and one-way ANOVA using SPSS23.0. The following conclusions can be drawn from the results of this study. First, emotional lighting color preference of fitness users varies according to Gender. Second, the difference of perception of color by emotional illumination of fitness users was found to be partially different in color and sex. Third, there was a difference in color recognition among emotional lighting color recognition according to exercise participation type of fitness users.

• Journal of Industrial Convergence
• /
• v.20 no.8
• /
• pp.25-31
• /
• 2022

This study examines the impact of residential environmental satisfaction on AIP(Aging in Place), and analyzes how their relationship differs depending on housing characteristic variables (ownership type, housing type, and residential area). For this purpose, as of November to December 2020, a questionnaire analysis was conducted on 373 adult males and females residing in Busan and Gyeongnam. The results of this study are summarized in two ways as follows. First, the higher the satisfaction with the residential environment, the higher the AIP. Second, it was analyzed that the positive relationship between satisfaction with the residential environment and AIP was higher in ownership than in rental cases, and further decreased in detached houses compared to apartment houses. In addition, compared to other regions, metropolitan cities or small and medium-sized cities had a higher positive (+) relationship between satisfaction with the residential environment and AIP. This study will provide important implications for policymaking related to population and urban planning.

• Journal of Industrial Convergence
• /
• v.20 no.11
• /
• pp.165-175
• /
• 2022

The purpose of this study is to understand the effect of membership type for subscription service (individual subscription vs. group subscription) on continuous intention, and to verify the mediating effect of ease of justification and the moderated mediating effect of uncertainty. An experiment was conducted on 78 university students. As a result, consumers who use subscription services in group subscription showed higher intention to continue using the subscription service than consumers who use the subscription service in individual subscription. Also, the ease of justification mediates the effect on the intention to continue using. In addition, uncertainty was found to moderating effect of ease of justification on continuous use intention according to the type of subscription. This study understands the psychological mechanism of consumers according to the type of subscription service subscription and provides useful implications for companies that provide subscription services.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1059-1065
• /
• 2020

Demand for pressure sensors is increasing in various fields such as machinery, healthcare and medical care. A recent study is being conducted to create sensors that are more sensitive and have longer linear sections based on measurement principles. In this paper, a film-type sensor with a membrane structure was developed to measure the pressure distributed in the axial direction of a hot roll laminator. Performance of sensors was evaluated by resistance and durability according to membrane diameter. The resistance of the membrane sensor varies according to the contact state and contact area of the electrode. Therefore, the membrane diameter selection is important. Experiments showed the most pronounced variation in resistance under pressure at 8 mm in diameter of membrane. Reliability evaluation of sensors was carried out at room temperature and high temperature. The pressure on the sensor was pressurized 1000 times to measure the initial resistance and the resistance after the evaluation to analyze the change. Sensors showed stable results with low resistance changes of 5.15% and 6.27%, respectively. A large area sensor manufactured using the developed sensor also showed reliable results.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.11-18
• /
• 2016

This study focused on examining the possibility for recycling of Fe-Si electric sheet. We manufactured Fe-6.5Si mother alloy using by Fe-Si electric sheet scrap for transformer core materials. And then, soft magnetic alloy powder which diameter and shape were $45{\sim}150{\mu}m$ and sphere type was prepared by gas atomization process. As we compared to commercial Fe-6.5Si powder, its diameter distribution and microstructure of recycled powder was a similar. To investigate the possibility of reusing the soft magnetic composite sheet for electronics, recycled powder was treated to have a high aspect ratio (AR), and we finally obtained the 65~66 AR and $2.3{\mu}m$ thickness powder. To release the residual stress of powder, heat treatment was conducted under $300{\sim}400^{\circ}C$, $N_2$ gas. And then, soft magnetic sheet was made by tape casting process using by those powders. After the density and permeability of tape was measured, and we confirmed that the recycled Fe-Si electric sheet scrap was possible to reuse the soft magnetic materials of electronics.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2017

Fe-9.8Si-6.0Al mother alloy was manufactured using by Fe-3.5Si recycled scrap and Si powder. And then, soft magnetic alloy powder of $D_{50}$ size and sphere type were prepared by gas atomization process. To obtain the soft magnetic powder of a high aspect ratio, in the first, we conducted the ball milling process for 8 hours. And heat treatment was performed under $650^{\circ}C$, 2 hours and $N_2$ atmosphere condition for reducing the residual stress of the powder. Based on these process, we made around $50{\mu}m$ diameter Fe-9.8Si-6.0Al powder, which morphology and shape was a similar to the commercial Fe-Si-Al powder. Finally, the soft magnetic sheets were prepared by tape casting process using by those powders. The permeability of the tape casting sheet was measured, and we confirmed the possibility of reusing to the soft magnetic materials of Fe-Si electric sheet scrap.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.105-110
• /
• 2022

In line with the trend of the 4th Industrial Revolution, we tried to study the scalability of the craft sector in the art field in the wake of the convergence of new fields through the combination of different fields. To this end, a craft case using 3D printing technology was analyzed based on the theoretical background of the definition and value of digital craft. As a result of the study, craft works using 3D printing technology could be divided into four forms according to the fusion expression method. First, the mixed type was most characterized by harmonious production without significantly deviating from the traditional craft type. Second, the component type was produced in the form in which the characteristics of digital technology, which has advantages of certain shapes and detailed work, were best exhibited. Third, the structural type became a work with analog sensibility by adding traditional craft techniques based on the results output from a 3D printer. Finally, the connection type was the work that showed the greatest glimpse of originality and uniqueness among the analysis cases of this study. As digital technology is positively widely used, future studies will also deal with effective work directions.

• Journal of Industrial Convergence
• /
• v.20 no.8
• /
• pp.61-67
• /
• 2022

The Internet of Things(IoT) is one of the key technologies in the Fourth Industrial Revolution. The IoT is a system that acquires information from various sensors and provides meaningful information to users. The method of obtaining information from sensor is using WIFI, Bluetooth and Server. is not accessible to external users because of different type of networks or local area communication. For this reason, there is a problem that external user cannot receive notification in regard to sensor information. In this paper, we want to establish a cloud message environment using Google's FCM(Firebase Cloud Messaging) and find out through experiments how users can receive notifications even if they are outside.

• Journal of Digital Convergence
• /
• v.19 no.7
• /
• pp.189-197
• /
• 2021

In order to commercialize technology, Korea is continuously fostering specialized institutions for technology transfer/commercialization, and it is composed in various forms. However, there are limited studies on corporate performance according to the type of technology transfer/commercialization specialized institution and the type of support. This study aims to measure the combined utilization performance and performance of companies that have adopted the technology by classifying the types of technology transfer/commercialization specialized institutions. To this end, a study was conducted on 380 companies that promoted the introduction and use of external technologies. As a result of the analysis, it was found that the more the combined use of technology transfer/commercialization specialized institutions has a positive effect on corporate performance, and has different effects on corporate performance depending on the items of external technology introduction. In addition, it was found that the earlier the industrial growth stage is, the higher the corporate performance. Through this study, implications of strategies for the use of specialized organizations for technology transfer and commercialization and introduction of external technologies of the company were presented at the corporate level.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.291-299
• /
• 2020

The purpose of this study was to be used as basic data for the development of future-type curriculum in health. The awareness and preparation of the forth industrial revolution were surveyed on 280 college students in health departments preparing medical technicians. A self-written structured questionnaire was used for data collection, and the recognition of the forth industry revolution was 2.74, 3D printing (3.59) was high, and neural network machine learning(2.33) was the lowest. Students majoring in Physiotherapy (3.00) had the highest perception, and those majored in Dental engineering(2.37) had the lowest perception, and there was a difference in the degree of perception of IoT by major (p=0.024). For the forth industrial revolution, 54.5% of students are preparing, and lack of interest (42.9%) is the most difficult reason to prepare, and 50.6% of educational experience and 60.9% of VR&AR game experience have experience. In the era of the forth industrial revolution, job loss (38.7%) was high, and the required competency was creative capacity (50.6%). Therefore, it is necessary to develop a curriculum related to the fourth industrial revolution and apply teaching methods that can increase the awareness and preparation of health college students in the era of the fourth industrial revolution.