• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.181-187
• /
• 2017

The purpose of this study was to provide basic data for development of environmental design technology for greenhouses constructed in reclaimed lands. The climatic conditions around seven major reclaimed land areas with a plan to install advanced horticultural complexes in Korea were analyzed. The characteristics of natural ventilation and temperature rise through the thermal environment measurement of the greenhouse in Saemangeum were analyzed. The part to be applied to the environmental design of the greenhouses in reclaimed lands were reviewed. Results of comparing the ventilation rate of the greenhouse according to the presence or absence of plants showed the greenhouse with plants had the lower ventilation rate, but the smaller rise of indoor temperature due to the evapotranspiration of plants. In the greenhouse with plants, the number of air changes was in the range of 0.3 to 0.9 volumes/min and the average was 0.7 volumes/min. The rise of indoor temperature relative to outdoor temperature was in the range of 1 to $5^{\circ}C$ and the average $2.5^{\circ}C$. The natural ventilation performance of the experimental greenhouse constructed in the reclaimed land almost satisfied the recommended ventilation rate in summer and the rise of indoor temperature relative to outdoor temperature did not deviate considerably from the cultivation environment of plants. Therefore, it was determined that the greenhouse cultivation in Saemangeum reclaimed land is possible with only natural ventilation systems without cooling facilities. As the reclaimed land is located in the seaside, the wind is stronger than the inland area, and the fog is frequent. This strong wind speed increases the ventilation rate of greenhouses, which is considered to be a factor for reducing the cooling load. In addition, since the fog duration is remarkably longer than that of inland area, the seasonal cooling load is expected to decrease, which is considered to be advantageous in terms of the operation cost of cooling facilities.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.175-181
• /
• 2007

Design prototype is described from the stately aspect as a principle of formative art, and from the shapeable aspect of physical feature. The prototype can be a common denominator which is contained in one nation's culture, art and life, as the thing which corresponds to the daily industrial craft, architecture and art's production intention and activity with the thought and background of the culture. We have formed the design prototypes with time and space in the process which absorbs and integrates the new culture. Modern Korean design's prototype can be seen in the late Chosun. As the upper culture and sub-culture were combined, the active culture was developed. Nobody can deny that Chosun's culture and art becomes a basis of today's design and Korea's beauty. In creating the design prototype, the natural environmental factors such as topography and climate are the most important. Such natural environmental factor led the design recognition of art and craft art, as well as an architecture and indoor environment's form. Korea design produced the artisan sprite which is devoted to a moral duty and instinct as our nation's nature and emotion, and ensured the emotional process not the rational process. So, it created naturalism which accepted the material and shape. Our design prototype's path tracking as an energy of future society's new design identity, can be the important theme for our design development.

• Korean Institute of Interior Design Journal
• /
• v.24 no.6
• /
• pp.3-12
• /
• 2015

Recently, the spatial design of resting spaces in department stores has been changed. The design elements such as colors, materials, lighting, natural elements, furniture arrangement, and VMD are not only providing a pleasant and natural indoor atmosphere in resting spaces but also providing various services to customers. In this study, it aims to analyze how the spatial design characteristics of resting spaces in department stores are appeared. The results are as follows. First, the spatial characteristics of the resting spaces in department sores came up as five factors; accessibility, recognition, comfort, convenience, and esthetics. As the result, the accessibility is the most important factor in resting spaces. Second, the resting spaces was well located near by the elevators and escalators providing easy accessibility to customers to floor. Third, the resting spaces need to improve the spatial design for emphasizing the recognitions by using colors, materials and lighting. Fourth, the resting spaces were provided different atmosphere by their location. Fifth, the various forms of furniture, curved, zigzagged, and cubed, were placed in the resting spaces for comport use. Sixth, the aesthetic was the least important factor of all. To improve this problem, the resting spaces need to provide cultural contents by installing art pieces, moving picture facilities, and VMD. Seven, most of the resting spaces had similar floor plan type that they did not perform their role successfully. The resting spaces need to provide both individual rooms and unique open spaces for giving a choice to use when customers visit them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.443-449
• /
• 2017

The imbalance of air supply and the exhaust on subway platforms has led to the installation of platform screen doors in underground subway stations. This imbalance causes the accumulation of pollutants on the platform and loss of comfort due to the lack of ventilation. In this study, a floor exhaust system was optimized using computational fluid dynamics (CFD) and an optimization program. The optimized floor exhaust system was manufactured and tested experimentally to evaluate the particle collection efficiency. CFX 17.0 and HEEDS were used to analyze the flow field and optimize the principal dimensions of the exhaust system. As a result of the three-step optimization, the optimized floor exhaust system had a total height of 1.78 m, pressure drop of 430 Pa, and particle collection capability of 61%. A fine dust particle collection experiment was conducted using a floor exhaust system that was manufactured at full scale based on the optimized design. The experiment indicated about 65% particle collection efficiency. Therefore, the optimized design can be applied to subway platforms to draw in exhaust air and remove particulate matter at the same time.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.149-157
• /
• 2019

This study interested on management of broodstock and the effect of raise the temperature for promotion of maturity in Tresus keenae. For management of broodstock, we performed indoor and outdoor culture. In addition, broodstock was put in exposure and immersion condition. This experimental design is aimed at knowing the optimal management of broodstock. In addition, we investigated the promotion of maturity, growth and survival rate when raise the temperature of the breeding seawater of broodstock in winter season. Result that, the management of broodstock was shown to be more effective obesity and survival rate in outdoor culture than indoor culture. In addition, there is no anthropogenic food supply in management and it is easy to management because it is kept under natural environmental conditions. Therefore, It is considered appropriate to management to outdoor culture. In raise the temperature, survival rate was lower in the experimental group than in the control group. However, obesity was significantly increased compared with the control group. Also, gonad showed that the sex maturity was promoted. If sex maturation is not developed due to seasonal water temperature, the promotion of sexual maturity through heating is considered to be an effective method in terms of artificial seed production.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.443-449
• /
• 2018

Acquiring indoor point cloud, using SLAM (Simultaneous Localization and Mapping) based mobile mapping system, is an element progress for development of as-build BIM (Building Information Model) for the maintenance of the building. In this research we proposed a simulation-based target geometry determination for extrinsic calibration of multiple 2D laser scanning mobile system. Four different types of calibration sites were designed: (1) circle type; (2) rectangle type; (3) double circle type; and (4) double rectangle type. Based on the measurement values obtained from each simulated calibration site geometry, least squares solution based extrinsic calibration was derived. As a result, the rectangle type geometry is most suitable for extrinsic calibration of this system. Also, correlation values between extrinsic calibration parameters were high, and calibration results were distinct according to the calibration sites.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.169-181
• /
• 2017

Objective: The aim of this study was to explore the influence of outdoor weather conditions on subjective responses during physical activity. Background: The largest difference between indoor and outdoor conditions is the existence of the sun. The heat load from the sun has an influence on the heat gain of the human body and the intense degree of solar radiation affected thermal comfort. Method: Thirty eight people were exposed to a range of climatic conditions in the UK. Weather in England does not have extremely hot and cold temperature, and the current study was conducted under warm (summer and autumn) and cool (spring and summer) climates. Measurements of the climate included air temperature, radiant temperature (including solar load), humidity and wind around the subjects. Subjective responses were taken and physiological measurements included internal body temperature, heart rate and sweat loss. Results: This study was conducted under four kinds of environmental conditions and the environmental measurement was performed in September, December, March, and June. The values for sensation, comfort, preference, and pleasantness about four conditions were from 'neutral' to 'warm', from 'not uncomfortable' to 'slightly comfortable', from 'slightly cooler' to 'slightly warmer', and from 'neither pleasant nor unpleasant' and 'slightly unpleasant', respectively. All subjective responses showed differences depending on air temperature and wind speed, and had correlations with air temperature and wind speed (p<0.05). However, subjective responses showed no differences depending on the radiant temperature. The combined effects of environmental parameters were showed on some subjective responses. The combined effects of air temperature and radiant temperature on thermal sensation and pleasantness were significant. The combined effects of metabolic rate with air temperature, wind speed and solar radiation respectively have influences on some subjective responses. In the case of the relationships among subjective responses, thermal sensation had significant correlations with all subjective responses. The largest relationship was shown between preference and thermal sensation but acceptance showed the lowest relationship with the other subjective responses. Conclusion: The ranges of air temperature, radiant temperature, wind speed and solar radiation were $6.7^{\circ}C$ to $24.7^{\circ}C$, $17.9^{\circ}C$ to $56.6^{\circ}C$, $0.84ms^{-1}$ to $2.4ms^{-1}$, and $123Wm^{-2}$ to $876Wm^{-2}$ respectively. Each of air temperature and wind speed had significant relationships with subjective responses. The combined effects of environmental parameters on subjective responses were shown. Each radiant temperature and solar radiation did not show any relationships with subjective responses but the combinations of each radiant temperature and solar radiation with other environmental parameters had influences on subjective responses. The combinations of metabolic rate with air temperature, wind speed and solar radiation respectively have influences on subjective responses although metabolic rate alone hardly made influences on them. There were also significant relationships among subjective responses, and pleasantness generally showed relatively high relationships with comfort, preference, acceptance and satisfaction. Application: Subjective responses might be utilized to predict thermal stress of human and the application products reflecting human subjective responses might apply to the different fields such as fashion technology, wearable devices, and environmental design considering human's response etc.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.844-861
• /
• 2008

The papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during the year of 2007 have been reviewed. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro nano fluid, micropump and fuel cell. Traditional CFD was still popular and widely used in research and development. Studies about fans and pumps were performed in the field of fluid machinery. Characteristics of flow and fin shape optimization are studied in the field of piping system. (2) The research works on heat transfer have been reviewed in the field of heat transfer characteristics, heat exchangers, and desiccant cooling systems. The research on heat transfer characteristics includes thermal transport in pulse tubes, high temperature superconductors, ground heat exchangers, fuel cell stacks and ice slurry systems. For the heat 'exchangers, the research on pin-tube heat exchanger, plate heat exchanger, condensers and gas coolers has been cordially implemented. The research works on heat transfer augmenting tubes have been also reported. For the desiccant cooling systems, the studies on the design and operating conditions for desiccant rotors as well as performance index are noticeable. (3) In the field of refrigeration, many papers were presented on the air conditioning system using CO2 as a refrigerant. The issues on the two-stage compression, the oil selection, and the appropriate oil charge were treated. The subjects of alternative refrigerants were also studied steadily. Hydrocarbons, DME and their mixtures were considered and various heat transfer correlations were proposed. (4) Research papers have been reviewed in the field of building facilities by grouping into the researches on heat and cold sources, air conditioning and air cleaning, ventilation and fire research including tunnel ventilation, flow control of piping system, and sound research with drain system. Main focuses have been addressed to the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies were mostly focused on analyzing the indoor environment in various spaces like cars, old tombs, machine rooms, and etc. in an architectural environmental field. Moreover, subjects of various fields such as the evaluation of noise, thermal environment, indoor air quality and development of energy analysis program were researched by various methods of survey, simulation, and field experiment.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.51-60
• /
• 2015

In Korea, 69.4 % of duck farms had utilized conventional plastic greenhouses. In this facilities, there are difficulties in controlling indoor environments for raising duck. High rearing density in duct farms also made the environmental control difficult resulting in getting more stressed making their immune system weaker. Therefore, a facility is needed to having structurally enough solidity and high efficiency on the environmental control. So, new design plans of duck house have recently been conducted by National Institute of Animal Science in Korea. As a study in advance to establish standard, computational fluid dynamics (CFD) was used to estimate the aerodynamic problems according to the designs by means of overall and regional ventilation efficiencies quantitatively and qualitatively. Tracer gas decay (TGD) method was used to calculate ventilation rate according to the structural characteristics of duck houses including installation of indoor circulation fan. The results showed that natural ventilation rate was averagely 164 % higher than typically designed ventilation rate, 1 AER ($min^{-1}$). Meanwhile, mechanically ventilated duck houses made 81.2 % of summer ventilation rate requirement. Therefore, it is urgent to develop a new duck house considering more structural safety as well as higher efficiency of environmental control.

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.77-86
• /
• 2012

The 5-day schoolweek system at the present has increased spare time of the youth. The society should use this opportunity to lead the youth to grow as a responsible community member as offering them programs to fulfill their desires and potential abilities. The purpose of this study is to have the improvements to give the youth appropriate and comfortable space. As the scope of the study, I selected a total of 5 places as each rating (the best, good, moderate, insufficient) 4 places in the comprehensive assessment conducted by youth facilities association among the independent buildings located in Seoul and 1 place after the assessment. As the methods of the study, with regard to environmental psychology and behavior and Youth cultural center, I investigated them theoretically as literature survey method, organized and analyzed, put them together through facilities research analysis and the survey. The research results are as follows : First, a static individual space should be placed in well accessibility due to high affinity for the facilities. Second, a dynamic individual space needs the place and equipment for physically and mentally healthy leisure culture. Third, a dynamic group space needs to provide ensuring service hours, setting proper size of space, comfortable indoor environment considering the relationship between physical activity and others. Fourth, a static group space needs to vary the programs to develop potential abilities by a variety of experiences to maintain the correlation the layout adjacent to leader's office.