• Journal of Korean Port Research
• /
• v.9 no.1
• /
• pp.57-63
• /
• 1995

In this paper we examine the mass transport within the boundary layer near the sea bottom. The fluid domain is seperated into inner and outer region of boundary layers. In outer region, the wave field is assumed to be inviscid and irrotational. When the incident waves enter the arrays of circular cylinders, the scattering of water waves by an array of N bottom mounted vertical circular cylinders is solved using the method proposed by Linton & Evans under the potential theory. In inner region, the Navier-Stokes equation must be satisfied with boundary conditions at the boundary later and bottom is to be represented by the sum of the Eulerian mean drift and the Stokes' drift.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.5
• /
• pp.18-24
• /
• 2007

The environmental value of coastal vegetation has been widely recognized. Coastal vegetation such as reed forests and seaweed performs several useful functions, including maintaining water quality, supporting fish (and, thus, fisheries), protecting beaches and land from wave attack, stabilizing sea beds and providing scenic value. However, studies on the physical and numerical process of wave propagation, sediment transport and bathymetric change are few and far between compared to those on the hydrodynamic roles of coastal vegetation. In general, vegetation flourishing along the coastal areas attenuates the incident waves through momentum exchange between stagnated water mass in the vegetated area and rapid mass in the un-vegetated area. This study develops a numerical model for describing the wave attenuation and sediment transport in a wave channel in a vegetation area. By comparing these results, the effects of vegetation properties, wave properties and model parameters are clarified.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.427-429
• /
• 2008

During last decades several devastating tsunamis have been occurred around the Pacific Ocean area. These tsunamis not only killed many human beings but also caused serious property damages. In the southern sea of the Korean Peninsula, many islands are scattered. These islands are very vulnerable to unexpected tsunami attacks. In this study, a numerical model is employed to investigate behaviors of tsunamis around circular islands. Although a few studies have been reported on the run-up heights of tsunami attacking a circular island, the effects of oblique incidence of tsunamis on the run-up heights have not been examined in detail. The run-up heights of obliquely incident tsunamis will be studied.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2141-2145
• /
• 2008

Three kind of system composed with buoyant flap hinged at the sea floor are modeled experimentally. The mechanically coupled system provides shelter by reflecting incident waves and by attenuating wave energy through structural and viscous damping. The characteristics of wave reflection, transmission and dynamic angle of the flap oscillation for various conditions were investigated. The structure can minimize wave transmission by attaching offshore wing wall.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.466-472
• /
• 2009

Offshore wind energy is gaining more and more attention during this decade. For the countries with coast sites, the water depth is significantly large. This causes attention to the floating wind turbine. Offshore wind turbines are designed and analyzed using comprehensive simulation codes that account for the coupled dynamics of the wind inflow, aerodynamics, elasticity and controls of the wind turbine, along with the incident waves, sea current, hydrodynamics, and foundation dynamics of the support structures. In this work, a three-bladed 5MW upwind wind turbine installed on a floating spar buoy in 320m of water is studied by using of fully coupled aero-hydro-servo-elastic simulation tool. Specifications of the structures are chosen from the OC3 (Offshore Code Comparison Collaboration) under "IEA Wind Annex XXIII-subtask2". The primary external conditions due to wind and waves are simulated. Certain design load case is investigated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.1
• /
• pp.86-94
• /
• 2011

This paper compares frequency domain and time domain predictions from the ShipMo3D ship motion library with observed motions from model tests and sea trials. ShipMo3D evaluates hull radiation and diffraction forces using the frequency domain Green function for zero forward speed, which is a suitable approach for ships travelling at moderate speed (e.g., Froude numbers up to 0.4). Numerical predictions give generally good agreement with experiments. Frequency domain and linear time domain predictions are almost identical. Evaluation of nonlinear buoyancy and incident wave forces using the instantaneous wetted hull surface gives no improvement in numerical predictions. Consistent prediction of roll motions remains a challenge for seakeeping codes due to the associated viscous effects.

• Water for future
• /
• v.19 no.3
• /
• pp.259-266
• /
• 1986

A numerical study of the process of wave deformation, such as reflection and transmission coefficients and wave forms with bottom change was carried out by Boundary Element Method using linear elements. It is assumed that the incident wave is normal and oblique to the bottom and the wave may be described by linear theory The accuracy of the computational scheme is investigated by comparing the results of other researchers in the following several cases. (1) Simple and sloping stepped bottom geometry (2) Submerged breakater type bottom geometry (3) Trench type bottom geometry

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.248-253
• /
• 2009

The propulsion system which apply the diesel engine with reduction gear as prime mover, generally installs the elastic coupling between engine and intermediate shaft, This coupling can isolate the vibratory torque excited by diesel engine, or the excess transient torque and moment occurring by external impact. So, diesel engine and reduction gear can safely operate by elastic coupling. Unfortunately, the elastic coupling for skimmer vessel was repeatedly broken by unknown vibration during the sea trial In this paper, the authors are searching for the possibilities and causes of the elastic coupling failure, via the global vibration measurement and the past incident investigation.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.1
• /
• pp.68-75
• /
• 2019

A low-crested structure (LCS) is an excellent feature not only because it provides shore protection but also because it is fully submerged. However, in order to properly control waves, it is necessary to maintain a certain range of crest height and width in consideration of the wave dimensions at the installation area. According to previous studies, an LCS has some wave breaking effect when the crest width is more than a fourth of the incident wavelength and the crest depth is less than a third of the incident wave height. In other words, if the crest width of the LCS is small or the crest depth is large, it cannot control the wave. Therefore, when an LCS is installed in a large sea area with a great tidal range in consideration of the landscape, waves cannot be blocked at high tide. In this study, the hydraulic performances of a typical trapezoidal LCS with a constant crest height and a low-crested structure with an adjustable crest height, which was called a tide-adapting low-crested structure (TA-LCS) in this study, were compared and evaluated under various wave conditions through hydraulic experiments. It was found that the wave transmission coefficients of the TA-LCS at high tide were lower than the values for the typical LCS based on empirical formulas. In addition, the hydraulic performances of the TA-LCS for wave reflection control were 12.9?30.4% lower than that of the typical LCS. Therefore, the TA-LCS is expected to be highly effective in controlling the energy of incoming waves during high tide even in a macro-tidal area.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.3
• /
• pp.515-530
• /
• 2013

The results of investigations into marine incidents have become an important basis in determining not only possible causes, but also the extent of negligence between the perpetrator and victim. However, marine incidents occur under special circumstances i.e. the marine environment, and this leads to difficulties in identifying causes due to problems in scene preservation, reenactment and acquisition of witnesses. Given the aforementioned characteristic of marine incidents, the International Convention for the Safety of Life at Sea (SOLAS) has adopted mandatory regulations on the carriage of Voyage Data Recorders (VDRs) and Automatic Identification Systems (AIS) for ships of a certain gross tonnage and upwards, so as to reflect recent developments in radio communication and marine technology. Adopted to provide an international standard for investigations and to promote cooperation, the Code of the International Standards and Recommended Practices for a Safety Investigation into a Marine Casualty or Marine Incident (Casualty Investigation Code) recommends member states to build capacity for analysis of VDR data. Against this backdrop, this paper presents methods for efficient investigations into the causes behind marine incidents based on data analysis of VDR, which serves as the black box of ships, as well as digital forensic techniques.