• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.177-182
• /
• 2007

This paper presents the InGaP/GaAs HBT differential LC VCO with low phase noise performance for adaptive feedback interference cancellation system(AF-lCS). The VCO is verified with enhanced tank structure including filtering technique. The output tuning range for proposed VCO using asymmetric inductor and symmetric capacitors withlow pass filtering technique is 207 MHz. The output powers are -6.68 including balun and cable loss. The phase noise of this VCO at 10 kHz, 100 kHz and 1 MHz are -102.02 dBc/Hz, -112.04 dBc/Hz and -130.40 dBc/Hz. The VCO is designed within total size of $0.9{\times}0.9mm^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.127-128
• /
• 2006

The proposed differential LC cross-coupled VCO is implemented in InGap/GaAs HBT process for an adaptive Global Positioning system(GPS) application. Two filtering capacitors are used at the base of output buffer amplifiers at the both sides of the core m order to improve phase noise characteristics. The VCO produced a phase noise of -133 dBc/Hz at 3MHz offset frequency from the carrier frequency of 1.489GHz and the second harmonic suppression is significantly suppresed up to -49dBc/Hz in simulation result. The three pairs of BC diodes are integrated m the tank circuit to increase the VCO Tunning range.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.104-113
• /
• 1994

We have fabricated n-p-n HBTs using 3-inchAlgaAs/GaAs hetero structure epi-wafers grown by MBE. DC and AC characteristics of HBT devices were measured and analyzed. For HBT epi-structure, Al composition of emitter was graded in the region between emitter cap and emitter. And base layer was designed with concentration of 1${\times}10^{19}/cm^{3}$ and thickness of 50nm, and Be was used as the p-type dopant. Principal processes for device fabrication consist of photolithography using i-line stepper, wet mesa etching, and lift-off of each ohmic metal. The PECVD SiN film was used as the inslator for the metal interconnection. HBT device with emitter size of 3${\times}10{\mu}m^{2}$ resulted in cut-off frequency of 35GHz, maximum oscillation frequency of 21GHz, and current gain of 60. The distribution of the ideality factor of collector and base current was very uniform, and the average values of off-set voltage and current was very uniform, and the average values of off-set voltage and current gain were 0.32V and 32 within a 3-inch wafer.

• Journal of electromagnetic engineering and science
• /
• v.4 no.4
• /
• pp.156-161
• /
• 2004

The MMIC cascode VCO is designed, fabricated, and measured for Ku-band Low Noise Blcok(LNB) system using InGaP/GaAs HBT technology. The phase noise of -116.4 dBc/Hz at 1 MHz offset with output power of 1.3 dBm is obtained at 11.526 GHz by applying 3 V and 11 mA, which is comparatively better characteristics than compared with the different configuration VCOs fabricated with other technologies. The simulated results of oscillation frequency and second harmonic suppression agree with the measured results. The phase noise is improved due to the use of the smallest value of inductor in frequency determining network and the InGaP ledge function of the technology. The chip size of $830\time781\;{\mu}m^2$ is also achieved.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.3
• /
• pp.52-59
• /
• 1997

Design and performance of principal four ICs for the 10-Gb/s optical communication system are presented. AlGaAs/GaAs HBTs are basic devices to implement a laser diode driver, apre-amplifier, and a limiting amplifier, and GaInP/GaAs HBTs are used for an AGC amplifier. We fbricated 11.5-GHz LD driver, a pre-amplifier, and a limiting amplifier, an dGaInP/GaAs HBTs are used for an AGC amplifier. We fabricated LD deriver, 10.5 GHz pre amplifier, 7.2 GHz AGC amplifier, and 10.3 GHz limiting amplifier, optimized circuit design and the stabilized MMIC fabrication process.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1073-1076
• /
• 2003

This paper shows the performance as a photodetector of InP/InGaAs HPT operated with a base bias and forntside optical injection through the emitter. InP/InGaAs HPT produced the high optical gain of about 16.2 where HPT is biased at Vc=1V, I$_{B}$=20$\mu$A with an input optical power of 2.4$\mu$W. And we examined that the optical gain of HPTs becomes larger when operating in 3-terminal configuration rather than 2-terminal with the floating base. The optical performance of InP/InGaAs HPT is an attractive to the PIN Photodetector for use in long wavelength optical receivers.s.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.92-97
• /
• 2006

In this paper, a fully integrated Ku-band tripler differential MMIC voltage controlled oscillator(VCO), which consists of a differential VCO core and two triplers, is developed using high linearity InGaP/GaAs HBT technology. The VCO core generates an oscillation frequency of 3.583 GHz, an output power of 3.65 dBm, and a phase noise of -96.7 dBc/Hz at 100 kHz offset with a current consumption of 30 mA at a supply voltage of 2.9 V. The tripler shows excellent side band rejection of 23 dBc at 3 V and 12 mA. The tripler differential MMIC VCO produces an oscillation frequency of 10.75 GHz, an output power of -13 dBm and a phase noise of -89.35 dBc/Hz at 100 kHz offset.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.897-903
• /
• 2011

This paper presents a highly linear power amplifier MMIC, having an output power level of about 1 watt, based on InGaP/GaAs hetero-junction bipolar transistor(HBT) technology for the 900 MHz band. The active bias circuit is applied to minimize the effect of temperature variation. Ballast resistors are optimized to prevent a current collapse and a thermal runaway. The fabricated power amplifier exhibited a gain of 17.6 dB, an output P1dB of 30 dBm, and a PAE of 44.9 % at an output P1dB from the one-tone excitation. It also showed a very high OIP3 of 47.3 dBm at an average output power of 20 dBm from the two-tone excitation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.84-85
• /
• 2008

In this paper, differential cross coupled LC VCOs with two noise frequency filtering techniques are proposed. Both VCOs are based on symmetric capacitor with asymmetric inductor tank structure. The VCO using low pass filtering technique shows low phase noise of -130.40 dBc/Hz at 1 MHz offset when the center frequency is 1.619 GHz. And the other VCO using band pass filtering technique shows -127.93 dBc/Hz at 1 MHz offset frequency when center frequency is 1.604 GHz. Two noise frequency filtering techniques are approached with different target.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.11
• /
• pp.546-550
• /
• 2002

In this paper, Heterojunction phototransistors(HPT's) with an optically transparent ITO emitter contacts were fabricated. The ITO ohmic contacts were realized by employing thin imdium layer between the ITO and $n^+$-InP layers. The ITO contact was annealed at $250^{\circ}C$. The specific contact resistance of about $6.6{\times}10^{-4}{\Omega}cm^2$ was measured by use of the transmission line model (TLM). Heterojunction bipolar transistors (HBTs) having the same device layout were fabricated to compare with HPTs. The DC characteristics of the InP/InGaAs HPT showed the similar electrical characteristics of the HBT. Emitter contact resistance($R_E$) of about $6.4{\Omega}$ was extracted, which was very similar to that of the HBT. The optical characteristics of HPT's were generated by illuminating the device with light from $1.3{\mu}m$ light. It showed that HPT's can be controlled optically.