• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1167-1171
• /
• 2020

In this work, we proposed a graded gate-doping structure to alleviate an electric field in p-GaN gate layer in order to improve the reliability of normally-off GaN power devices. In a TCAD simulation by Silvaco Atlas, a distribution of the graded p-type doping concentration was optimized to have a threshold voltage and an output current characteristics as same as the reference device with a uniform p-type gate doping. The reduction of an maximum electric field in p-GaN gate layer was observed and it suggests that the gate reliability of p-GaN gate HFETs can be improved.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.1
• /
• pp.30-39
• /
• 1991

The influence of physical parameters (Al mole fraction, thickness, doping concentration) in the window and emitter on the efficiency characteristics of heteroface p-$Al_{x}Ga_{1-x}As/p-GaAs/n-GaAs/n^{+}$-GaAs solar cell is investigated. The maximum efficiency theoretically calculated in this device is obtained when a thickness of the window is in a range of (400-1000))$\AA$and a thickness/doping concentration of the emitter is in a range of (0.5-0.8)$\mu$m/(1-7)${\times}10^{17}cm^{-3}$, respectively. Also is the efficiency improved according to the increase of Al mole fraction in the indirect gap window(0.41${\le}x{\le}1.0$). The optimum designed heteroface cell with an area of 0.165cm$^2$fabricated using MOCVD exhibits an active area conversion efficiency of 17%, having a short circuit current density of 21.2mA/cm\ulcorner an open circuit voltage of 0.94V, and a fill factor of 0.75 under ELH-100mW/cm$^2$illumination.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.102-105
• /
• 2000

The self-aligned AICaAs/GaAs HBTs with the mesa-etched emitter showed severe degradation in current gain under stress. The cause was identified to be due to instability of the surface states on extrinsic base. In this paper the surface states were diminished by the hetero-passivation of the InGaP ledge emitter and the reliability was drastically improved. The activation energy of current gain degradation was extracted to be 1.97eV and MTTF to be 4.8$\times$108 at 14$0^{\circ}C$ which has satisfied MIL standards.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.294-300
• /
• 2006

We fabricated the distributed feedback (DFB) InP/InGaAs/InP grating structures on InP (100) substrates by metal-organic chemical vapor deposition, and their structural properties were investigated by atomic force microscopy and scanning electron microscopy. Self-assembled InAs/InAlGaAs quantum dots (QDs) were grown on the InP/InGaAs/InP grating structures by molecular beam epitaxy, and their optical properties were compared with InAs/InAlGaAs QDs without grating structure. The duty of the grating structures was about 30%. The PL peak position of InAs/InAlGaAs QDs grown on the grating structure was 1605 nm, which was red-shifted by 18 nm from that of the InAs/InAlGaAs QDs without grating structure. This indicates that the formation of InAs/InAlGaAs QDs was affected by the existence of the DFB grating structures.

• Journal of the Optical Society of Korea
• /
• v.11 no.3
• /
• pp.133-137
• /
• 2007

We compare electroabsorption modulators (EAMs) with multiple quantum wells (MQWs) based on InGaAs(P)/InP and InGa(Al)As/InAlAs material systems. We carefully choose the quantum-well structures so that the structures based on different material systems have similar band-offset energies and excition-peak wavelengths. Assuming the same light wavelength of $1.55{\mu}m$, we show the transfer functions of EAMs with each quantum-well structure and calculate the escape times of photogenerated charge carriers. As the heavy-hole escape time of the quantum well based on InGaAs(P)/InP is much longer than those of photogenerated charge carriers of InGa(Al)As/InAlAs, the EAM based on the InGa(Al)As/InAlAs material seems to be more suitable for high-optical-power operation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.49-55
• /
• 2004

This paper describes a 1550 nm multichannel source using Quatemary/quatemary multiple quantum well (MQW) InGaAsP/InGaAsP quantum confined Stark effect (QCSE) tuning for dense wavelength division multiplex (DWDM) systems with 140 ㎓ channel spacing and 32 nm channel selection bandwidth.

• Journal of the Microelectronics and Packaging Society
• /
• v.4 no.2
• /
• pp.71-78
• /
• 1997

본 논문에서는 InGaAsP 에피막에서 도핑 농도와 에피막의 미세조직구조가 photoluminescence (PL) 스펙트럼의 위치 및 형상에 어떤 영향을 미치는가를 연구하였고, 그 결과를 설명하기 위해 가능한 모델을 제시하였다. InGaAsP 에피막(발진파장 ~1.3$\mu$m) 을 액상증착법(liquid phase epitaxy, LPE)으로 성장하여 9K에서 PL측정을 했을 때 InGaAsP 활성층 내 Zn 억셉터의 유무에 따라 PL 피크의 위치가 최대 30nm (24meV)까지 shift하고 피크의 선폭도 넓어지는 현사을 발견하였다. 이와같은 피크 분산현상은 inGaAsP 에피막이 유기금속 기상증착법으로 성장되거나 Zn로 고농도로 도핑되거나 고온에서 어닐링 될 경우 대폭 감소하였다. 이를 설명하기 위해 여러 가지 모델을 설정하여 실험을 하였으며 이 중 InGaAsP 에피막의 미세조직구조 특히 Spinodal 분해에 의한 조성이 모듈레이션과 Zn의 상호작용의 관계가 이 현상을 설명하는 데 가장 적절하다는 것을 밝혔다.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.13-16
• /
• 2001

InP/InGaAs Heterojunction phototransistors(HPT's) with an optically transparent ITO emitter electrode were fabricated and characterized. At the same time, heterojuntion transistors(HBT's) having the same device layout were fabricated. By comparison with InP/InGaAs HBT's, the do characteristics of InP/InGaAs HPT's showed the similar electrical charateristics of HBT's. the model parameters of the device were extracted and compared.

• ETRI Journal
• /
• v.11 no.4
• /
• pp.84-97
• /
• 1989

The influence of Zn, Si and Te diffusion on the interdiffusion in $GaAs-Ga_1_-xIN_xAs_1__yP_y$and InP$Ga_1__xIn_xAs_1__yP_y$ heterostructures was studied. The heterostructures were grown by liquid phase epitaxy, and the impurity diffusion into the heterostructures was carried out using metal compound or element sources. The extent of interdiffusion for both group III and V atoms was observed by depth profiling of matrix elements with secondary ion mass spectrometry and Auger electron spectroscopy. Selective enhancement of cation interdiffusion was observed by the concurrent Zn diffusion in both the GaAs based-and InP based-crystals. In contrast to the Zn diffusion, the Si diffusion in the GaAs based-crystal and the Te diffusion in the InP based-crystal enhanced both cation and anion interdiffusion to the same extent. A kick-out mechanism is proposed to explain the selective enhancement of the cation interdiffusion due to Zn, and a single vacancy mechanism is proposed for the interdiffusion due to Si and Te.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.424-432
• /
• 1993

AlGaAs/InGaAs/GaAs pseudomorphic structures have been grown by atmosheric pressure-MOCVD . The Al incorporation efficiency is constant but slightly exceeds the Ga incorporation during the growth of AlGaAs layers at $650^{\circ}C$ . Meanwhile , the In incorporation efficiency is constant but slightly less than the Ga incorporation in InGAAs layers. InGaAs/GaAs QWs were grown and their optical properties were characterized . $\delta$-doped Al0.24Ga0.76As/In0.16 Ga0.84As p-HEMT structures were successfully grown by MOCVD and their transport properties were characterized by Hall effect and SdH measurements. SdH Measurements at 3.7K show clear magnetoresistance oscillations and plateaus in the quantum Hall effect confirming the existence of a two-dimensional electron gas(2DEG) and a parallel conduction through the GaAs buffer layer. The fabricated $1.5\mu\textrm{m}$gatelength p-HEMTs having p-type GaAs in the buffer layer show a high transconductance of 200 mS/mm and a good pinch-off characteristics.